Все товары

• 

  KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466

  Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.

  Suitable for everyone plastic endbells, besides endbells CAHOZA

  7.68 $

• 

  KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644

  Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.

  43.32 $

• 

  PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016

  HAWK REPLACEMENT ARMATURE W/MARKED RUS

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  44.50 $

• 

  KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40

  G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.

  51.60 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  0.30 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  1.20 $

• 

  KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L

  ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L

  24.98 $

• 

  CAHOZA Setup kit - G27 Light .630" - #82

  CAHOZA Setup kit - G27 Light .630" - #82

  This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159

  80.00 $

• 

  MOTOR HORKY (under order), assembly

  Motors supplied under order. Delivery time from 1 month to 1 year. Also, price can change depending on the terms of delivery.

  450.00 $

• ZHB PRODUCTION 1/24 MODEL KIT IN THE MINIMUM CONFIGURATION

  This is a kit of the production model 1/24 in the simplest configuration: Champion chassis, 64 pitch, clips, Lexan body, Proslot X12 motor with a cheap armature (PS3000 motor, good for a beginner, costs only $ 33, then in this setup it will be possible to install any other armature.).

  80.70 $

• ZHB PRODUCTION 1/24 MODEL KIT IN THE MAXIMUM CONFIGURATION

  This is a kit of the production model 1/24 in the maximum configuration: the JK two-piece chassis, 72 pitch, motor: setup + matched magnets of the 12th group + KOFORD armature + ballbearings + multi-coil springs + washers, tubing instead of clips, lexan body.

  185.00 $

• 

  CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A

  PARAMETERS

  • Magnets quantity: 20 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  210.53 $

• 

  CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103

  PARAMETERS

  • Magnets quantity: 24 flat
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  221.05 $

• 

  CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A

  PARAMETERS

  • 24 segmented magnets – bevelled 15°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  231.58 $

• 

  CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B

  PARAMETERS

  • 28 segmented magnets – bevelled 7°
  • Outside dia.: .590" (15,00 mm)
  • Magnets height: .448" (11,4 mm)
  • Magnets length: .315" (8 mm)
  • Endbells dia.: .570" (14,5 mm)
  • Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
  • Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)

  242.11 $

• 

  MID AMERICA Clear Body 1/24 4" Cab Over Race Truck, Lexan .007" (0.175 mm), with paint mask - #MID1010

  MID AMERICA Clear Body 1/24 4" Cab Over Race Truck

  • Made from: Polycarbonate (Lexan)
  • For: 1/24 scale
  • Thickness: .007" (0.175 mm)
  • Clear body with paint mask

  7.99 $

• 

  MainRef race manager. The most modern software for competition and training. It works with all modern Windows operating systems. Switching wires included. Fits to same connectors as SPYTECH (Fully interchangeable - compatible interface)

  Was used on ISRA 2022 in Latvia.

  More info will add later.

  PLease, ask if you have any questions.

  526.32 $

• 

  KOLHOZA Body Formula 1/32 Kolhoza Mercedes W07 Hybrid (#0114LT) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2027

  KOLHOZA Body Formula 1/32 Kolhoza Mercedes W07 Hybrid (#0114LT) painted in livery F1 team Stewart SF3 1999, 1 pc.

  • ISRA 2017-2019 "Mercedes W07 Hybrid"
  • Made from LEXAN thickness .005"
  • Really light body without any stickers, only painting

  10.00 $

• 

  RED FOX Clear body Production 1/24 Corvette DTM (ISRA 2021), lexan, thickness .005" (0.125 mm), w/paint masks - #RFISRAVETTE5

  RED FOX Clear body Production 1/24 Corvette DTM LEGAL FOR ISRA 2021

  • Made from: Polycarbonate (Lexan)
  • For: Production 1/24
  • Thickness: .005" (0.125 mm)
  • Clear body, with paint mask

  8.00 $

• 

  RED FOX Clear body Production 1/24 Corvette DTM (ISRA 2021), lexan, thickness .007" (0.175 mm), w/paint masks - #RFISRAVETTE7

  RED FOX Clear body Production 1/24 Corvette DTM LEGAL FOR ISRA 2021

  • Made from: Polycarbonate (Lexan)
  • For: Production 1/24
  • Thickness: .007" (0.175 mm)
  • Clear body, with paint mask

  8.00 $

• 

  KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan EJ12 2002, 1 pc. - KZA#2037

  KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan EJ12 2002, 1 pc. - KZA#2037

  • Made from: Polycarbonate (Lexan)
  • For: Formula 1/32
  • Thickness: .005" (0.125 mm)
  • Custom painted body

  25.00 $

• 

  DUBICK Engineering 2024 ES 1/24 Eurosport chassis assembled without ballbearings - #DBES24

  All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.

  147.37 $

• 

  KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MP4, 1 pc. - KZA#2038

  KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MP4, 1 pc. - KZA#2038

  • Made from: Polycarbonate (Lexan)
  • For: Formula 1/32
  • Thickness: .005" (0.125 mm)
  • Custom painted body

  25.00 $

• 

  JK Custom Painted Body 4" Lola B12 LMP Martini 0.010" - #B114BU7

  JKP Custom Painted Body 4" Lola B12 LMP Martini 0.010"

  29.99 $