ЦМИТ "ИнТехно"

Центр Молодежного Инновационного Творчества "ИнТехно" - проект из области социального предпринимательства, направленный на популяризацию и развитие детского и юношеского технического творчества в городе Кузнецке Пензенской области.

DUBICK Engineering Chassis
DUBICK Engineering Controllers
ZHB (DUBICK Engineering) Setups
KOLHOZA Tools, Equipments & Accessories
ISRA F1/32 Legal 2023-2026 custom painted bodies by KOLHOZA
Brushless Zone
- Brushless Chassis
- Brushless Motors
  - NSR Motors
  - DoSlot Motors
- Brushless Chips
  - NSR Chips
  - DoSlot Chips
Controllers & Controller Parts
Motors, Setups & Motor Parts
- Eurosport assembly motors
- Setups For Eurosport Motors
- Eurosport Classes Armatures
- Parts for Assembly Eurosports Classes Motors
- Falcon, Hawk & Johnson Motors
- Group-16D Motors & Parts
  - Proslot 16D Motors & Parts for Assembly
  - Parma 16D Motors & Parts for Assembly
- Group-12 Motors & Parts
- Drag Motor Parts
- Motor (2 mm) Spacers
- Motor Springs
  - Motor Springs Cups
- Motor Brushes
- Ballbearings for Motors
- Shunt wires & Spring Insulations
- Motor screws
Chassis & parts
- Chassis Production 1/24 & Production 1/32
- Chassis for Eurosport & national classes
- Tube for pines & retainers to them
- Another parts for assembling models
- Sheet lead
Lead Wire (all)
Guides, Lead Wire, Braid, Clips, Nuts & Spacers for Guides
- Lead Wire
- Guide Clips
- Standart Profile Guides
- Low Profile Guides
- Guide Nut
- Guide Spacers
- Braid
Axles, Bearings, Oilites & Axle spacers
- Axle Oilites (made from powder bronze)
- Ballbearings for Chassis
- Axles
- Axle Spacers 2 mm
- Axle Spacers 3/32" (2,36 mm)
- Ballbearings (Different)
Screws
Gears
- Gears glued on axis
  - Gears glued on 2 mm axis
  - Gears glued on 3/32" axis
- Crown Gears
- 80 Pitch
- 72 Pitch
- 64 Pitch
- 48 Pitch
Wheels, Tire Donuts, Rims
- Front Wheels for All Classes of Models
- Rear Rims for 2 mm Axles
  - 16 mm Rear Rims for 2 mm Axles
  - 20 mm Rear Rims for 2 mm Axles
- Rear Rims for 3/32" (2,36 mm) Axles
  - 16 mm Rear Rims for 3/32" (2,36 mm) Axles
  - 20 mm Rear Rims for 3/32" (2,36 mm) Axles
- Alloy for "TEAPOT" & GM (Front Rims, Gears, Big Dia. Rims)
- Tire Donuts
- Rear Wheels for 2 mm Axle
- Rear Wheels for 3/32" (2,36 mm) Axles
- Rear Wheels for 1/8" (3.15 mm) Axles
Bodies, Stickers, Pins, Body Tape, Bulletproofing & Accesories
- Body Clips & Pins
- Materials For Body Reinforcement
- Lane Stickers
- Body Stickers
  - TayloRacing Body Stickers
  - ATTAN Body Stickers
  - Slotlab Body Stickers
  - PARMА Stickers
  - Stickers by MAKS
- Clear Interiors & Drivers
- ISRA Legal Clear Bodies
- Production 1/32 Clear Bodies
- Production 1/24 (G-12) Clear Bodies
- Formula 1/32 Clear Bodies
- Formula 1/24 Clear Bodies
- Eurosport 1/32 Clear Bodies
- Eurosport 1/24 Clear Bodies
- Open-12 1/24 Clear Bodies
- "Teapot" 1/24 Clear Bodies
- Retro 1/24 Clear Bodies
- Other 1/24 and 1/32 Clear Bodies
  - 4.5" Modified & Dirt Oval Clear Bodies
  - GTP, GT1, LMP & Ultimate Clear Bodies
- GM-class (Truck) Clear Bodies
- G-7 Air Control Kits & Bodies
- Painted bodies & interiors
  - Kolhoza F1/32 сustom painted body
- Polycarbonate (Lexan) Sheet
Fluids
- Consumables (Arm Dye & Others)
- Tire Traction, Conditioners and Glue
- Glue for Tires & Magnets
- Oil for Ballbearings, Oilites & Gears
- Conditioners for Braids, Commutators & Tires
Paint
- Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body
- TAMIYA spray paints for polycarbonate (lexan) & masking tape
- PARMA bottle paints for polycarbonate (lexan)
- Ralph Thorne Racing bottle paints for polycarbonate (Lexan)
- TayloRacing Paint Masks
- Parma Paint Masks
- TayloRacing Paint Masks for RC-models
Tools & Equipments
- Equipment
- Tools (Misc)
  - F 1/32 Install Motor Tools
  - Body Cutting Tools
- Wrenches for Wheels & Gears
- Guide & Braid Tools
- Motor Building
  - Koford Bearing Assembly Tool (for motor)
  - Diamond magnet hones
- Tool for Preparing Motor Brushes & Alignment Bar for Brush Hoods
  - Dubick Diamond brush radius tool
- Equipment & Tools for Tire Machining
- Soldering Equipment and Accessories
- Power Supply & Race Manager
- Equipment for Grooving Commutator
Accessories & Storage
- T-Shirts & Aprons
- Plastic organizers, Boxes for Motors, Tubes for Armatures and race pit boxes
- Tubes for Wheels
RTR Cars & Kits
- Kits for assembly Production 1/32 & Production 1/24 Models
- RTR Cars
"Teapot" Models Kits & Parts
- Parts & Details for Build "TEAPOT" Models
- Kits for Build "TEAPOT" Models
Service
Second hand
RC-models
- TayloRacing Paint Masks for RC-models
- RC 1/24 Clear Bodies
- RC Custom Painted Bodies

All brands:

3M
ALPHA
Argentina Slot
ARP (American Race Products)
ASSOCIATED
ATTAN
B.S.V.
B52
BANDITO RACING
BOLID
BOLID-NeAn
BPA
Brain Saunders
BSR
CAHOZA
CAMEN Racing Products
CHAMPION RACING
Chicagoland Raceway
CW bearings
Delta Plastic
DenVel electronics
DIFALCO
DoSlot
DUBICK Engineering
Eagle Products
EARacing
FACTORY RACIN BODIES
FRONT LINE (FL) SLOT
FUZION (WEIGHING-MACHINE JEWELRY)
General Electric
GENERIC USA
GO FAST
GOFER RACING
GOPHERT
GRW
H&R
HAKKO
Henkel
HORKY
HUDY
INORS
INTEGY
JConcepts
JK Products
JS Car
K&S Engineering
KA PRODUCTS
KELLY (PROSLOT)
KLINGON
KOALA CLAWS
KOBIS RACING
KOFORD
KOLHOZA
KrickKrack
KV
LARS
LOCTITE (ГЕРМАНИЯ)
Lucky Bob's Racing Products
Magnehone
MAIN {Solutions}
MAKS
MASHKOZA
MG
MID AMERICA
MOSSETI
MS-Slotparts
MTT Products
MURA
NeAn
Neotron
Novak
NSR
OLEG
PARMA
PAW BRAID
PJ RACEWAY
PK
PRIME Racing
PRO-TRACK Corporation
PROSLOT
Qbick
R-Geo Products
RACERS EDGE
Ralph Thorne Racing
RED FOX
REH
RICHARD MACK
S&K
SCB
Skinner
SLICK 7
Slot Fox
Slot Racing Ukraine
Slotlab
Slotracingshop.com
SONIC
SPEED SHOP
SPYTECH
SRP (Slacker Racing Products)
SRT SLOT
Sveslot
T/R
TAMIYA
TayloRacing
TOP SECRET
TQ WIRE
Trinity
TURNIGY
TWP Products
UHU
VALIKO
VITULA
VOKI
Weller
WIHA
Worm Jim Slot
WRIGHTWAY
YRE
ZHB
ЦМИТ "ИнТехно"

ЦМИТ "ИнТехно"

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR02

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. Full cut details kit, ready for build by rivets - #IR04

InTechno Kit for assembly slot car box "Sportsman Working Place"

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR06

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR07

INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis parts - #IR08

INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR09

INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR10

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART". SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR11

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR12

INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. Full cut details kit, ready for build by rivets - #IR13

PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR

All brands: