Все товары
-
BSV Gear 48 pitch, 38T, 0° angle, 3/32" axle - #BSV4838
BSV Gear 48 pitch, 38T, 0° angle, 3/32" axle - #BSV4838
-
MS-SLOTPARTS Powered brush tool for radius and slot for horizontal and verticat brushes (special order!)
MS-SLOTPARTS Powered brush tool for radius and slot for horizontal and verticat brushes (special order!)
Powered brush tool of the extra class in a noble carbon look.
For exact grinding of the radius and the slot on horizontal and vertical brushes. The tools are driven by two separate motors. External power supply 3Volt DC (not included). -
S&K F1 motor adjustment tool for offset crowns with 3/32" axle - #0103
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 3/32"
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
SONIC Double ended wrench - .050 and .078 tips - #51-5078
SONIC Double ended wrench - .050 and .078 tips - #51-5078
After machining, we finish your Sonic Pro-Wrench with high quality anodizing and laser marking. We then assemble your Sonic Pro-Wrench with the finest drill blank tips available. Our Double Ended Pro-Wrench has both a .050″ and a .078″ tip installed.
The .050 tip has a reduced shank diameter so it can be used with Euro-style wheels with ease
-
CAHOZA .050" ALUMINIUM ALLEN WRENCH - #66
Very accurate and convenient wrench!
ALUMINIUM WRENCH WITH GUIDE NUT TOOL 9
aluminium wrench with .05" tip and guide nut tool, anodised and knurled for better gripping, for 9mm (.354") guide nut
-
PARMA FASKOLOR F-1 PRO DUAL ACTION - #40260GF
Our FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
JK 1/32 F1 cheetah 11 chassis kit - #C62
JK 1/32 F1 cheetah 11 chassis kit
A beautiful alternative for club races
Designed for HAWK motor, but it is possible to install any motor that falls under the arm :)
Old catalog #JK25141
-
ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM
SET OF 2 AIRBRUSHES & PARTS TO THEM
Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
KOFORD AXLE BEARING INSTALATION SPRING - M634
Coil spring for aligning axle bearings - Perfect rear axle bearing alignment - Slide over axle and slide through axle holes in chassis. Slide on bearings in place and square. Solder bearings from the inside of pillow blocks.
-
MTT TRACK (RACE) MANAGER
Track (race) manager. Works with software SPYTECH
-
ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - #109
More & more sportsmen use gears glued on axle. It's connected with decrease imbalance, caused clamping of the screw and possibility use rims without offset of the hub in ES-32
Just let us know what gears and axle you need - and we will be work for you!
-
SPYTECH RACE MANAGER
Recognized worldwide software with a track control unit.
-
SLICK7 REINFORCED STRAPPING TAPE, 12 mm x 22 m - #S7-575
Excellent strapping tape. Takes up little space.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 12 mm x 50 m - #DB2073
3m Reinforced strapping tape, 12mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 25 mm x 50 m - #DB2074
3m Reinforced strapping tape, 25mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 50 mm x 50 m - #DB2075
3m Reinforced strapping tape, 50mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
CHICAGOLAND RACEWAY Double stick tape - #CR096
CHICAGOLAND RACEWAY Double stick tape - #CR096
-
WIHA PRECISION TORX SCREWDRIVER T5 x 40mm(for screws in setups VOKI, Proslot X12, e.t.c) - #26705
Precision Torx Screwdriver T5 x 40mm
Rotating cap for precise turning and control with fingertip
Precision handle - high quality plastic, cadmium free
Molded on tapered handle allows rapid rotation
High performance blade - CVM steel, hard chrome finished
Tip - precision ground for exact fit, hard chromed non-slip surface
Blade Length: 40mm (1.6") -
CAHOZA T SHIRT XL - #310XL
100% pure cotton, available in black or purple, available in XL or XXL, always specify color and size when ordering
-
CAHOZA T SHIRT XXL - #310XXL
100% pure cotton, available in black or purple, available in XL or XXL, always specify color and size when ordering
-
ALPHA T-SHIRT,SIZE-L - #900L
ALPHA T-SHIRT,SIZE-L - #900L