Wheels, Tire Donuts, Rims

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 25
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 33
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540

  FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR  - #540

  This rims is made for pressing on the axle!

  PARAMETERS

  • dia., mm: 14
  • width for gluing tires, mm: 5,5
  • total width, mm: 12
  • dia. of holes for set on axle Ø2 mm., mm : 1,8

  1.60 $

• 

  TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006

   FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006

  Very convenient stickers for preparing your bodies for the passage of a technical commission

  3.60 $

• 

  Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair

  Good grip donuts for club races.

  Better alternative for Pirania Light and Super Natural.

  1.37 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø9.5 mm, ultra light(1,32 gr/pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 16
  • dia.,mm: 9,5
  • weight per pair, gr/pair: 1,32

  ON PHOTO RIMS WIDTH 20 MM!!

  5.50 $

• 

  S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø9.5 mm, ultra light(1,38 gr/pair)

  PARAMETERS

  • axle, mm: 2
  • width, mm: 16
  • dia., mm: 9,5
  • weight per pair, gr/pair: 1,38

  5.50 $

• 

  S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø10.5 mm, ultra light (1,62 gr/pair)

  PARAMETERS

  • axle, mm: 2
  • width, mm: 16
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 1,62

  5.50 $

• 

  S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, ultra light(1,64 gr/pair)

  PARAMETERS

  • axle, mm: 2
  • width, mm: 16
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 1,64
  • with offset of hub for ES 1/32 & Production 1/32

  5.50 $

• 

  ZHB FRONT RUBBER TIRES, pair

  FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)

  1.00 $

• 

  ALPHA REAR WHEEL TIRES SBR YELLOW, pair - #YELLOW

  REAR WHEEL TIRES SBR YELLOW, pair  - #YELLOW

  1 pair of yellow tires for Production 1/32 or other classes

  1.80 $

• 

  ALPHA REAR WHEEL TIRES SBR ORANGE, pair - #ORANGE

  REAR WHEEL TIRES SBR ORANGE, pair  - #ORANGE

  1 pair of orange tires for Production 1/32 or other classes

  1.60 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm, standard (1,83 gr/pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 16
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 1,83

  3.89 $

• 

  ALPHA REAR WHEEL TIRES SUPERNATURAL, pair - #SUP-NAT

  REAR WHEEL TIRES SUPERNATURAL, pair - #SUP-NAT

  This tires can use in all classes (except Production 1/32)

  2.50 $

• 

  S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541

  FRONT RIMS FOR F1/24 MODELS , 1 PAIR  - #541

  This rims is made for pressing on the axle!

  PARAMETERS

  • dia.,mm: 14
  • width for gluing tires, mm: 13
  • total width, mm: 17,9
  • dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2

  1.60 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, pair

  PARAMETERS

  • axle, mm: 2,36
  • width, mm: 16
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 1,82
  • with offset of hub for ES 1/32 & Production 1/32

  3.89 $

• 

  S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)

  S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)

  This gear is made for pressing on the axle!

  You can pressed-on more thick axle, if you deploy the fitment hole

  1.40 $

• 

  S&K FRONT WHEELS FOR F 1/32, Ø14,5 mm, pair

  FRONT WHEELS FOR F 1/32, Ø14,5 mm, pair

  Replacement pair of front wheels for formula 1/32 chassis

  8.33 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, ultra light (1,6 gr/pair)

  PARAMETERS

  • axle, mm: 2,36
  • width, mm: 16
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 1,6
  • with offset of hub for ES 1/32 & Production 1/32

  5.50 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,ultraweight (1,57 gr/pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 16
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 1,57

  5.50 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø9.5 mm, ultra light (1,55 gr/pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 20
  • dia.,mm: 9,5
  • weight per pair, gr/pair: 1,55

  5.50 $

• 

  JK PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.2 mm - #JKR021-I

  PARAMETERS

  • axle: 3/32" (2,36 mm)
  • width, mm: 20
  • dia.,mm: 10,2

  5.00 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.5 mm, (2,2 gr/pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 20
  • dia.,mm: 10,5
  • weight per pair, gr/pair: 2,2

  3.89 $

• 

  S&K PLASTIC RIMS 3/32" axles, width 20 mm, Ø10.5 mm, (1,7 grammes/ pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 20
  • dia.,mm: 11
  • weight per pair, gr/pair: 1,7

  
  

  5.50 $