Все товары
-
WELLER Holder soldering iron - #T8000
WELLER Holder soldering iron - #T8000
- Easily attaches to work surface area
- Holds generic soldering tools
-
PARMA PAINTS FOR LEXAN
The best paints for polycorbinate. Due to the water base, lexan is not affected by the strength. Excellent keep on the body when striking.
The price is indicated per tube of 60 ml.
http://parmapse.shptron.com/c/faskolor-paint-shop
-
SLICK7 CLEANER-CONDITIONER FOR COMMUTATOR VOODO COMM BRAID DROPS - SL404
VOODOO COMM DROPS AND BRAID ANTI-BURN TREATMENT
-
PJ RACEWAY BIG RED Tire Cleaner & Conditioner, 1 OZ - #PJ-4002
PJ RACEWAY BIG RED Tire Cleaner & Conditioner, 1 OZ - #PJ-4002
-
SLICK7 GLIDEX II OILITES AND BALLBEARINGS OIL -#S7-426
SLICK7 OILITES AND BALLBEARINGS OIL
GLIDEX II Synthetic lubricant for bushings and ball bearings. A must for SL7 bushings.
-
SLICK7 Glidex synth lubricant - #SL7405
SL7405 - GLIDEX SYNTHETIC AEROSPACE LUBRICANT (MIL-SPEC). Ultra -HighFilmstrength , Bonding, low viscosity oil for ball bearing.
-
KOFORD PREMIUM BALLBEARING OIL - #M327
Premium BB oil.
Ultra high temp. synthetic oil with special antiwear and corrosion inhibitor additives. Oil formulation is selected to have the least detrimental effect iif excess gets on brushes. Treat your bearings to the best
-
KOFORD Mobile 1 racing oil - #M750
KOFORD Mobile 1 racing oil - #M750
Hi performance for ball bearings or oilites
-
LOCTITE SHAFT-BUSHING RETAINER LOCTITE 648 for fixing ballbearings into the chassis holes, 5 ml
Ballbearing retainer in rear bridge
-
3M Tire glue, tube 147 ml.
3M Tire glue, tube 147 ml.
The best tire glue! Used by the world wide professional, including wing-classes, where rims are often perforated and, along with large loads, have a smaller adhesive area.
-
ZHB Spray unit per bottle for the tire traction
Spray unit per bottle for the tire traction
-
KOFORD ISRA TECH TOOL - M674
ISRA tech tool - EDM cut and anodized
-
KOLHOZA Slot car box "Sportsman working place" - #KZA043
KOLHOZA Slot car box "Sportsman working place"
Width - 420 (+/- 10-20 mm) - 16.53" (+/- .39"- .78")
Height - 330 (+/- 10 - 20 mm) - 12.99" (+/- .39"- .78")
Depth - 200 (+/- 10-20 mm) - 7.87" (+/- .39"- .78") -
SLICK7 SILVER SHUNT WIRE, HANK, Silver weaving - #SL7219
SILVER PLATED SHUNT WIRE
Silver weaving
-
TQ SILVER SHUNT WIRE, 3 meters, Silver weaving - #TQ300
3 meters (10') silver plated copper shunt. The original 22 Gauge 3×50 «TIGHT WIND» construction is back!
Silver weaving
-
ZHB AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
-
ZHB Ballbearing 1/8" х 1/4" х 7/64" (3.15 x 6.35 x 2.78 mm), shielded, 7 balls, pair - #1/8х1/4
Ballbearing 1/8" х 1/4" х 7/64" (3.15 x 6.35 x 2.78 mm), shielded, 7 balls, pair
-
PROSLOT X7 PRO motor brushes (EURO motor sizes), 1 pr. - #PS-X7EURO
PROSLOT X7 PRO motor brushes (EURO motor sizes), 1 pr. - #PS-X7EURO
1 pair of Euro motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
PROSLOT X7 PRO motor brushes (EURO motor sizes), 6 pr. - #PS-X7EURO
PROSLOT X7 PRO motor brushes (EURO motor sizes), 6 pr. - #PS-X7EURO
6 pairs of Euro motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
KOFORD S.B.F. II Horizontal motor brushes, pair - #M486
Traditional brushes for motor, they have a little more density, compared to brushes PROSLOR - #PS-901 accordingly more are erased, but the collector wears out more.
In ISRA classes motors it is customary to establish BIGFOOT brush on "+" and a brush manufactured by PROSLOT on "-". Thus, it is possible to achieve the most uniform wear of the brushes. Regardless of this, as practice shows, the plus brush should be changed 2 times more often.
-
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
S.B.F. II Horizontal brushes for 16D, Super 16D, Competitor, etc. The Worlds best motor brush, winner of countless World and National championships. These are the brushes which our M476 and M244 brushes are machined from.
-
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
Now shortened and ready to use. Use with M313 light tension or M276 heavy tension springs and M329 or M295 heat transfer compound.