MOSSETI

• 

  MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050

  MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050

  Spring steel .050" thick - nickel plated

  6.50 $

• 

  MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051

  Retaining Clip (2) – All Chassis

  1.90 $

• 

  MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055

  MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055

  Fits all patriot chassis, fits over chassis tube - dampens vibration

  4.50 $

• 

  MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056

  MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056 

  Chassis dampening foam - 1/16" thick with 3m adhesive back fine cell 2" x 3"

  4.50 $

• 

  MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1060

  3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair

  “Really Cool Bushings”-With “Internal Oil Channel” -3/32” Axle Bushings (pr). These are a direct fit for 4.5” Front Axle positioning – Can also be used for Rear axle positioning with fore/aft and up/down

  4.25 $

• 

  MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1061A

  MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1061A

  Fits directly into chassis

  4.25 $

• 

  MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058

  MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058

  Flexible rubber - 0,5 mm (.020") thick

  4.50 $

• 

  MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059

  MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059

  4.50 $

• 

  MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234

  MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234

  This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans

  42.00 $