Chassis Production 1/24 & Production 1/32
-
PARMA 1/24 TURBO-flex Chassis - Steel - #420
PARMA steel 2 piece chassis is designed with a floating top pan for best handling and performance. A lightweight aluminum top pan is also available for more speed and faster cornering. 4" wheel base.
-
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
Green shaded. Made from a special .005" thick high gloss and low friction material. Protects the track and your chassis at the same time. It will also reduce unwanted braid arching which ruins the braids and slows your car down in the process. Each package come with 2 pre-cut peel and stick chassis skins.
-
MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051
Retaining Clip (2) – All Chassis
-
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
1/32 Center Section replacement for X32 Chassis JKP 1/32 CHEETAH 11 CHASSIS for PRODUCTION 1/32 - #JKPHC1132 & JKP 1/32 CHEETAH.11 CHASSSIS KIT W/1PAN for PRODUCTION 1/32- #JKPX32
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
Old catalog #HC1132P