"Teapot" Models Kits & Parts

This section will be actively developed and added. Will be add: kits of models for first-year beginners with motors Falcon and Johnson, also more advanced kits of models for the ES24U class on the basis of the IR chassis "Super-Teapot" in various configurations. There will be separate items for build "Teapot" models: rear axles, fixing for bodies, rivets, bodies, etc.

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 25
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK, for Phillips-head screwdriver, 1 pc. - #25196

  ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK HEAD, for Phillips-head screwdriver, 1 pc. - #25196

  0.15 $

• 

  ASSOCIATED STEEL NUT M2, 1 pc. - #25214

  STEEL NUT M2, 1 pc.

  Steel nut for fixing guides

  0.09 $

• 

  S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540

  FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR  - #540

  This rims is made for pressing on the axle!

  PARAMETERS

  • dia., mm: 14
  • width for gluing tires, mm: 5,5
  • total width, mm: 12
  • dia. of holes for set on axle Ø2 mm., mm : 1,8

  1.60 $

• 

  ZHB MOTOR (anologue of FALCON 4)

  Analogue of FALCON 4 motor. Excellent motor for 1-st year study models. On the speed characteristics is close to the FALCON 7 motor. The armature is wound with a rather thick wire and has a cast collector.

  6.00 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 33
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006

   FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006

  Very convenient stickers for preparing your bodies for the passage of a technical commission

  3.60 $

• 

  ZHB FIBERGLASS SHEET, FOIL ON ONE SIDE, thick. 1,5 mm, sheet 150*90 mm

  Very high quality fiberglass. It is well spilled with resin and does not separate.

  0.98 $

• INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR02

  KIT FOR BUILD CHASSIS "TEAPOT" 1/32

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/32
  • Scale: 1:32
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/drawing of chassis details

  2.27 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR03

  KIT FOR BUILD CHASSIS "TEAPOT" 1/32

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/32
  • Scale: 1:32
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/cut on half depth of chassis details

  5.30 $

• INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. Full cut details kit, ready for build by rivets - #IR04

  KIT FOR BUILD CHASSIS "TEAPOT" 1/32

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/32
  • Scale: 1:32
  • Full cut details kit, ready for build by rivets

  4.55 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR05

  KIT FOR BUILD CHASSIS "TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/24
  • Scale: 1:24
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/drawing of chassis details

  2.27 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR06

  KIT FOR BUILD CHASSIS "TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/24
  • Scale: 1:24
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/cut on half depth of chassis details

  4.55 $

• INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR07

  KIT FOR BUILD CHASSIS "TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/24
  • Scale: 1:24
  • Full cut details kit, ready for build by rivets

  4.55 $

• INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis parts - #IR08

  KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24
  • Scale: 1/32
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/drawing of chassis parts

  2.27 $

• INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR09

  KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24
  • Scale: 1:24
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/cut on half depth of chassis details

  4.55 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR10

  KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "SUPER-TEAPOT" 1/24
  • Scale: 1:24
  • Full cut details kit, ready for build by rivets

  4.55 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART". SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR11

  KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart"

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/24 "Standart"
  • Scale: 1/24
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/drawing of chassis details

  2.27 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR12

  KIT FOR BUILD CHASSIS "TEAPOT" 1/24

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/24
  • Scale: 1:24
  • Sheet: 100 x 200 mm
  • Thick.: 1,5 
  • w/cut on half depth of chassis details

  4.55 $

• 

  INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. Full cut details kit, ready for build by rivets - #IR13

  KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart", Classic type

  Parameters:

  • Kit for buid chassis: "TEAPOT" 1/24 "Standart", Classic type
  • Scale: 1:24
  • Full cut details kit, ready for build by rivets

  4.55 $

• 

  ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  1.21 $

• 

  ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  1.21 $

• 

  ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.

  1.21 $

• 

  S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541

  FRONT RIMS FOR F1/24 MODELS , 1 PAIR  - #541

  This rims is made for pressing on the axle!

  PARAMETERS

  • dia.,mm: 14
  • width for gluing tires, mm: 13
  • total width, mm: 17,9
  • dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2

  1.60 $