Tools & Equipments
-
ATTAN Magnet gluing tool
ATTAN Magnet gluing tool
The must have tool!
-
KOLHOZA PIT BOX - KZA004
Pit Caddy for holding tires, traction, tools etc
-
WORM JIM SLOT 1- 24 (36)V, 10A Power Supply. 110V or 230V. Weight 360 gr. - (Plastic box!) Size: 150 x 105 x 55 mm.
- Input: 110 - 230 V Output: 1-24(36)V / 10A
- USB Fast Charge QC 2.0,3.0 (5V,9V,12V)
- Size: 150 x 105 x 55 mm
- Weight: 360 grams
Plastic box - Two sets ultra soft wires 16awg with alligator clips and USB-microUSB high quality cable will be included.
-
JK Wheel stand L32 - JKL32
Wheel stand is for holding any kind of tires.
-
ATTAN Pit box, red
ATTAN Pit box, red
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
ATTAN Pit box, pink
ATTAN Pit box, pink
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
ZHB TECH BLOCK WITH MAGNETS
Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.
-
KOLHOZA DONUT MOUNTING TOOL- KZA003
Tool for mounting tire donuts onto the rim
Comes with axes 3/32" & 2 mm
-
ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
.050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
The simplest & cheap allen wrench for the beginning racers!
-
KOLHOZA GUIDE TOOL - KZA001
Guide threading & Guide sanding tool in one
-
KOLHOZA BODY CUTTING TOOL - KZA002
Professional tool for easy & smooth cutting of the body
-
JK Donut wizard mounting tool - #JK8075
JK Donut wizard mounting tool
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axle -
KOFORD ALIGNMENT BAR W/HOLES - #M148
Alignment bar with holes, provided with centering holes for both vertical and horizontal style brush hoods. The essential tool for motor assembly, used by motor builders world wide
-
KOLHOZA SOLDER REGULATION 220V - KZA#008
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 220 volt.
-
ZHB .050" ALLEN WRENCH W/GUIDE TOOL 9 mm, green, anodized
.050" ALLEN WRENCH, green, anodized
The necessary thing for any racers
-
ATTAN Rim drilling tool (3/32" axle) - #ATTRDT
ATTAN Rim drilling tool (3/32" axle) - #ATTRDT
-
PARMA .050" (4/40) ALLEN WRENCH, W/OUT HANDLE - #558S
Standard allen wrench for wheel screws, etc.
-
MID AMERICA Body harpoon - #MAR104
MID AMERICA Body harpoon
Body Harppon for punching pin holes in lexan bocies
-
KOLHOZA SHIELDED BALLBEARING 3 x 7 x 3 mm FOR TIRE TRUERS KZA006, KZA0061 - KZA0066
Reserve shielded ballbearing 3x7 mm for TIRE TRUERS KZA006, KZA0061
-
SONIC Fiddle stick - #SON50-1
SONIC Fiddle stick
tool for measuring tension on your motor springs
-
KOLHOZA SOLDER REGULATION 110V - KZA#0081
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 110 volt
-
KOLHOZA SLOT CAR BOX "SPORTSMAN WORKING PLACE" - #KZA005
Includes travel bag with wheels.
Width - 440 mm (17,3"); Height - 320 mm (12,6"); Depth - 200 mm (7,87")
All small boxes, as in the photo, are included. This sizes are good to the norms of hand luggage, so you can take the box to the cabin, which is very convenient for travels. There is no built-in lighting. All box have department for 1/32 and 1/24 models and for tools.
Cost of delivery are discussed individually
-
Novak Solder regulation / voltage converter 220-110V for Weller solder iron
Solder regulation / voltage converter 220-110V for Weller solder iron
Only for 110V Weller soldering!
-
MG DUBICK MOTOR SPRING INSTALLATION TOOL - #DB202
DE202 - Motor spring tool. Notched to make installing motor springs easier