Soldering Equipment and Accessories
-
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
-
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
-
WRIGHTWAY Paste flux - #WW10
WRIGHTWAY Paste flux - #WW10
Paste Flux in plastic syringe
-
MID AMERICA Soldering paste flux, 15 g., tin - #MID111B
MID AMERICA Soldering paste flux, 15 g., tin - #MID111B
-
LUCKY BOB ACID FLUX W/BRUSH (45 ml) - #1200
ACID FLUX - IN A BOTTLE WITH A BRUSH
-
-
WRIGHT WAY Flux brush, 1 pc. - #WWFB
WRIGHT WAY Flux brush, 1 pc.
-
WRIGHT WAY Flux brush, 4 pc. - #WWFB4
WRIGHT WAY Flux brush, 4 pc.
-
WRIGHT WAY Flux brush, 12 pc. - #WWFB12
WRIGHT WAY Flux brush, 12 pc.
-
KOLHOZA SOLDER REGULATION 220V - KZA#008
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 220 volt.
-
KOLHOZA SOLDER REGULATION 110V - KZA#0081
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 110 volt
-
RALPH THORNE Flux Brush, 1 pc. - #RTRFB-1
RALPH THORNE Flux Brush, 1 pc.
1 disposable flux brush with adjustable length handles.
-
SLOT FOX Flux brush, 1 pc. - #SF40110
SLOT FOX Flux brush, 1 pc. - #SF40110
-
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
RALPH THORNE Flux Brush, 20 pcs. - #RTRFB-20
RALPH THORNE Flux Brush, 1 pc.
This is a pack of 20 disposable flux brushes with adjustable length handles.
-
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #212
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #212
Viscose sponge for cleaning soldering iron tip
-
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #2121
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #2121
-
WRIGHTWAY VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 54 х 68 х 16 mm - #WWSPONG
High quality viscose sponge for cleaning soldering iron tip
-
KOFORD SILVER (5%) SOLDER W/FLUX CORE- #M333
Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.
-
KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444
Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks
-
KOFORD HIGH TEMPERATURE SOLDER W/FLUX CORE - #M618
High temperature silver solder. Melting point 598F. Ideal for soldering on pinions for G7 motors to prevent spinning.
-
CAHOZA HIGH TEMPERATURE SILVER SOLDER - #44
new excellent high temperature silver solder with perfect flux core (non corrosive flux), this solder is 94.8% tin and 5.2% silver, diameter 1mm, long 6 feet (1,8m
-
HAKKO 503 SOLDERING IRON 60W 120V
The Hakko 503F-V12ED/P is a red handled 60 Watt solder iron with an ED6 screwdriver solder tip. This lightweight iron is economical and ideal for both students and hobbyists alike.
For more information you can visit the following link: