ZHB

Under the designation ZHB are hidden motors or models, assembly by Andrei Zhbanov

Also these are the products of various manufacturers, the profile of which is not related to slotraising, but we use their products.

• 

  ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look

  .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look

  The simplest & cheap allen wrench for the beginning racers!

  0.50 $

• 

  ZHB MOTOR (anologue of FALCON 4)

  Analogue of FALCON 4 motor. Excellent motor for 1-st year study models. On the speed characteristics is close to the FALCON 7 motor. The armature is wound with a rather thick wire and has a cast collector.

  6.00 $

• 

  ZHB SUPER GLUE "MONOLIT"

  Good super glue with a dispenser. Suitable for gluing magnets and other works.

  0.24 $

• 

  ZHB Ø1.16 mm FRONT AXLE, CARBON, (length ~ 80 mm)

  Ø1.16 MM FRONT AXLE, CARBON, (length ~ 80 mm) used in Production 1/24 & Production 1/32 for made forward track with smal ribber wheels

  1.00 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 25
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 33
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ZHB .050" ALLEN WRENCH, green, anodized

  .050" ALLEN WRENCH, green, anodized

  The necessary thing for any racers

  7.50 $

• 

  ZHB TECH BLOCK WITH MAGNETS

  Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.

  19.00 $

• 

  ZHB armature bronze spacers 0.2 mm thick, 10 PCS - #DB4031

  0.95 $

• 

  ZHB Precut Brass pin tubes ZHB, length 11.8 mm, 4 PCS - #DB408

  0.95 $

• 

  ZHB ORGANIZER with 12 compartments 133×78×16 mm, transparent, plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 133×78×16
  • Quantity of sections, pcs.: 12

  2.90 $

• 

  ZHB Organiser 145×232×23 mm, transparent plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 145×232×23

  3.00 $

• 

  ZHB Digital Calipers 150 mm (6"). Accuracy: +/- .02mm/.001inch. Plastic box and 2 pc battery.

  Specs:
  Range: 0-150mm
  Accuracy: +/- .02mm/.001inch
  Resolution: .01mm/0.0005inch
  Repeatability: 0.01mm/0.0005inch
  Max Measuring Speed: 1.5m/s, 60inch/s (FAST)
  Operating Temp: 0~40Deg Celcius
  Storage Temp: -10~60Deg Celcius
  Power: 1.5v SR44 Battery

  22.00 $

• 

  ZHB Tweezers for small parts. Made from stainless steel.

  3.40 $

• 

  ZHB Organiser 145×232×23 mm, green, w/transparent cover, plastic

  These round polyethylene plastic snap lid containers with foam are though and strong. They are great for protection cans and setups when mailing them for service.

  3.00 $

• 

  ZHB TECH BLOCK WITHOUT MAGNETS - #1022

  18.00 $

• 

  ZHB Organiser 145×232×23 mm, blue, w/transparent cover, plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 50×45×15
  • Quantity of sections, pcs.: 1

  3.00 $

• 

  ZHB Organiser 104×176×23 mm, with 15 configurable compartments, clear plastic

  PARAMETERS

  • Material: Transparent plastic
  • Dimension, mm: 75×60×18
  • Quantity of sections, pcs.: 6
  • *For small parts

  3.40 $

• 

  ZHB Set of steel files, 3 pcs.

  ZHB Set of steel files, 3 pcs.

  0.00 $

• 

  ZHB armature bronze spacers 4.6 mm thick, 2 PCS - #DB4034

  0.55 $

• 

  ZHB Precut Brass pin tubes ZHB, length 11.8 mm, 24 PCS storage tube - #DB409

  5.50 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZBH#230

  The hub is not cut width, but machined to a diameter 3 mm.

  This gear for ES32 if you use offset rims in gears side or for ES24.

  You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)

  11.36 $

• 

  ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 10 pcs.

  Set of small steel files with diamond coating 10 pcs.

  12.00 $

• 

  ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 12 pcs.

  Set of small steel files with diamond coating 12 pcs.

  10.00 $