KOFORD
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
KOFORD Ultralight qualifying wire, 1 pc. - #M383
KOFORD Ultralight qualifying wire, 1 pc. - #M383
The Nat’s TQ ultralight qualifying lead wire made from ML magnet wire. Enough for several cars.
-
KOFORD HEAVY TIRE TRACTION, bottle - #M319
Heavy tire traction. The choice of the Pro's.
-
KOFORD Ø2 mm AXLE, selection (length 55 mm) - #M639
2mm ultraprecision premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground. One per package
-
KOFORD EDM Drilled (.040" hole) Ø2 mm AXLE, selection - #M743
KOFORD EDM Drilled Ø2 mm AXLE, selection
EDM drilled, 2mm .040 hole qualifying/race axle. premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground.
-
KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281
Self centering ultra light aluminum alloy spring cups for Koford set ups
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
KOFORD ALIGNMENT BAR W/HOLES - #M148
Alignment bar with holes, provided with centering holes for both vertical and horizontal style brush hoods. The essential tool for motor assembly, used by motor builders world wide
-
KOFORD 3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #M546-1
3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair
-
KOFORD 3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, 6 pairs - #M546
3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair
-
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened - #M671-27
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened - #M671-27
-
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-27
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-27
-
Koford Yellow spoiler sticker, 1 pc. - #M719
Koford Yellow spoiler sticker, 1 pc. - #M719
Decorate your body with branded stickers :)
-
KOFORD 408 BRAID, pair-#M661
The best choise for class Formula 1/32
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647
JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.
-
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs
-
KOFORD LOW PROFILE CUT DOWN GUIDE, W/OUT THREADED - #M698
Cut down graphite guide with no threads and with lead wire slots for integral guide tongue chassis with the famous Koford precision fit.
-
KOFORD LOW PROFILE CUT DOWN GUIDE, THREADED, W/SLOT - #M469
Cut down threaded graphite guide with lead wire slots for integral guide tongue chassis with the famous Koford precision fit
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
KOFORD .005" (0.13 MM) TEFLON GUIDE WASHER, 6 pcs. - #M322
.005 Teflon® guide washer. Use to reduce friction between guide and chassis. Where guide height adjustments are required, use #M321. Packaged 6 per bag.