Chassis & parts
-
JK 1/32 Direct Drive Chassis Kit - #C10
JK 1/32 Direct Drive Chassis Kit - #C10
Old catalog #JK32DD
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc. - #412
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc.
-
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
-
PARMA 1/24 TURBO-flex Chassis - Steel - #420
PARMA steel 2 piece chassis is designed with a floating top pan for best handling and performance. A lightweight aluminum top pan is also available for more speed and faster cornering. 4" wheel base.
-
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
K&S Round brass tube 3/32" x .014" x 12" (2.36 mm x 0.355 mm x 304.8 mm), 1 pack (3 pcs.) - #KS8126
K&S Round brass tube 3/32" x .014" x 12" (2.36 mm x 0.355 mm x 304.8 mm), 1 pack (3 pcs.) - #KS8126
-
Dubick 2023 ES 1/32 Eurosport Chassis Assembled without ballbearings - #ES32
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #DB406
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #DB406
Brass pin tubing for chassis 10.8 mm -4/10 of an inch.
-
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #DB407
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #DB407
Brass pin tubing for chassis 10.8 mm -4/10 of an inch
-
JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50
JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50
Old catalog #JKP9171
-
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm with a 3M selfstick adhesive tape - #DB209
Lead sheet thickness 0.5 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm with a 3M selfstick adhesive tape - #DB210
Lead sheet thickness 1 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
CASTRICONE 2021 ES Chassis Assembled without ballbearings
It is delivered under the order
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
HORKY 2017 F1-32 Chassis Assembled without ballbearings
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
ZHB OPTIONAL TORSION for CHASSIS PRODUCTION 1/24 JK 4" "CHEETAH X25", Ø1.2 mm
ISRA legal torsion for JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25.
Allows you to quickly disassemble and assemble the chassis and still remains flat. -
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
DUBICK Engineering 2020 Open 12 chassis assembled without ballbearings - #122020
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43