Motors, Setups & Motor Parts
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
H&R Jack Rabbit motor 14,000 rpm - #MJR1
H&R Jack Rabbit motor 14,000 rpm - #MJR1
Mabuchi Replacement Type - Double ended Plain 2mm shaft
-
KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281
Self centering ultra light aluminum alloy spring cups for Koford set ups
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154
ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag -
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
-
DUBICK MG MOTOR SPRING INSTALLATION TOOL - #DB202
DE202 - Motor spring tool. Notched to make installing motor springs easier
-
RED FOX C-can setup - #RFC0002
RED FOX C-can setup - #RFC0002
Only setup, without endbell, magnets, hardware & ball bearings.
-
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
Old catalog #JK303065
-
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
Old catalog #JK303065
-
DUBICK Anodized spring cups / 3 coil springs - #DB716
DUBICK Anodized spring cups /3 coil springs
-
PARMA Motor brushes, pair - #500K
Stock PARMA 16D motor brushes
-
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
VALIKO ARMATURE C-arm (ceramic, blue), WINDINGS 45/28, DIA. 0.460", STACK 0.240", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: C-arm
- Wingings: 45/28
- Dia.: 0.460"
- Stack: 0.240"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
VALIKO ARMATURE C-arm (ceramic, blue), WINDINGS 45/28, DIA. 0.475", STACK 0.240", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: C-arm
- Wingings: 45/28
- Dia.: 0.475"
- Stack: 0.240"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
Old catalog #JK30307
-
DUBICK Anodized spring cups / 5 coil springs - #DB717
DUBICK Anodized spring cups / 5 coil springs
-
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
PARMA Motor brushes & springs, 1 set - #500DK
PARMA Motor brushes & springs, 1 set - #500DK
Stock PARMA 16D brushes & springs
-
PROSLOT Replacement motor brushes for EURO MK1 motor, 1 cd. (6 pr.) - #PS-4014
PROSLOT Replacement motor brushes for EURO MK1 motor, 1 cd. (6 pr.) - #PS-4014
-
PROSLOT Production motor brushes, 1 pair - #PS-623
PROSLOT Production motor brushes, 1 pair - #PS-623
-
PROSLOT Production motor brushes, 1 cd. (6 pr.) - #PS-623
PROSLOT Production motor brushes, 1 cd. (6 pr.) - #PS-623
-
PROSLOT MOTOR BRUSHES SpeedFX, pair - #2014
Pair of Speed FX motor brushes.
Basic brushes, which are equipped with new motors PROSLOT 16D
-
PROSLOT MOTOR BRUSHES SpeedFX, 6 pairs - #2014
Pack of 6 pairs of Speed FX motor brushes.
Basic brushes, which are equipped with new motors PROSLOT 16D