VITULA
-
VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm) - #A1000
VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm)
Axles are made of hardened tool steel 60HRC. Axles have the deflection to the limit of 0.01 mm and the tolerance of the diameter 0.002 mm.
-
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
Pinions are EDM made from hardened tool steel. The shapes of the tooth were computer designed for low friction and the best run. Round running of the pinions is to the limit of 0.01 mm.
-
VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770
VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770
-
VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g
VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g
-
VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790
VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790
-
VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515
VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515
-
VITULA End mill bore 2 mm - #T1250
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P
VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
Spacers are precisely CNC turned from brass.
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
Spacers are precisely CNC turned from brass.
-
VITULA End mill bore 3/32" (2,36 mm) - #T1252
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
VITULA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #B1300
VITULA bushings in production chassis, pair
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm);
- Length: 2.4 mm.