PARMA
-
PARMA Motor brushes, pair - #500K
Stock PARMA 16D motor brushes
-
PARMA Motor brushes & springs, 1 set - #500DK
PARMA Motor brushes & springs, 1 set - #500DK
Stock PARMA 16D brushes & springs
-
PARMA 500 SERIES MOTOR SPRINGS - #500D
Replacement springs for all 16D motors
-
PARMA 4/40" ALLEN SCREW in rims & gears, 1 pc. - #555
Replacement 4/40 allen head set screws for Slot Car Front Wheels, Rear Wheels and Spur Gears.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: yellow - #40212
PARMA Fasglitter yellow
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: orange - #40214
PARMA Fasglitter orange
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: copper - #40215
PARMA Fasglitter copper
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: grape - #40216
PARMA Fasglitter grape
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: red - #40217
PARMA Fasglitter red
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: green - #40218
PARMA Fasglitter green
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: blue - #40220
PARMA Fasglitter blue
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: lavender - #40221
PARMA Fasglitter lavender
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Turbo Controller Trigger Pin- #355BS
Replacement Turbo Trigger Pin and Screw/Nut.
-
PARMA .050" (4/40) ALLEN WRENCH, W/OUT HANDLE - #558S
Standard allen wrench for wheel screws, etc.
-
PARMA TURBO NYLON TRIGGER - #355C
Replacement nylon trigger for Turbo Controllers.
-
PARMA 4/40" SET SCREW in rims & gears, BULK 100 psc. - #555BP
Replacement 4/40 allen head set screws for Slot Car Front Wheels, Rear Wheels and Spur Gears.
-
PARMA LOW PROFILE BLADE GRAPHITE GUIDE CUT DOWN - #70223
The Cut Down Blade was designed for high end racing for maximum ride height adjustability. It will lower the front of chassis .030". Material is milled from top of guide around bottom of post. Use with #70235 Spacers to adjust ride height from .010" to .020" if needed.
-
PARMA SLOT SPUR GEAR 48PITCH, 26T, 1/8" axle, (Ø14.84 mm) with hub adaptor 3/32", with screw - #70126
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
PARMA PINION GEAR 48 PITCH, 7T, BRASS (This is press-on style pinion gear) - 1 Pc - #520BP
High quality nickel plated brass motor pinions. These are press-on style and replacements for stock 16D motors, etc.
-
PARMA MODEL WHEELS TUNA 3/32" AXLE, 20MM WIDTH, ON MAGNESIUM RIMS, pair - #71020
MODEL WHEELS TUNA 3/32" AXLE, 20MM WIDTH, ON MAGNESIUM RIMS, pair - #71020
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 20
- Rims material: magnesium
- Tire: TUNA
- For classes scale: 1/24
-
PARMA SLOT SPUR GEAR 48 PITCH, 26T, 1/8" axle, (Ø14.84 mm), with screw - #70126
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
PARMA SLOT SPUR GEAR 48 PITCH, 31T, 1/8" axle, (Ø17.61 mm) with hub adaptor 3/32", with screw - #70131
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included
-
PARMA SPUR GEAR 48 PITCH, 31T, 1/8" AXLE (Ø17.61 mm), with screw - #70131
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
PARMA SPUR GEAR 48 PITCH, 32T, 1/8" AXLE (Ø18.17 mm), with screw - #70132
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.