Axles, Bearings, Oilites & Axle spacers

• 

  ZHB Ø1.16 mm FRONT AXLE, CARBON, (length ~ 80 mm)

  Ø1.16 MM FRONT AXLE, CARBON, (length ~ 80 mm) used in Production 1/24 & Production 1/32 for made forward track with smal ribber wheels

  1.00 $

• 

  SLICK7 Wheel retainer eyelets .032", 1 pack (10 pcs.) - #S7-140

  SLICK7 Wheel retainer eyelets .032", 1 pack (10 pcs.) - #S7-140

  Small eyelett retainer for holding .032" axle wheels onto axle. Use with S7-143 rubber wheels or S7-345 rubber wheel. Made from thin wall brass for min. weight. Fits over body pin axles.

  0.98 $

• 

  SLICK7 Wheel retainers 1/16" axle, 1 pack (4 pcs.) - #S7-129

  SLICK7 Wheel retainers 1/16" axle, 1 pack (4 pcs.) - #S7-129

  3.25 $

• 

  KOFORD Ø1.5 mm x 1.58" (40.1 mm) ultra precision axle for eurosport - #M760

  KOFORD Ø1.5 mm x 1.58" (40.1 mm) ultra precision axle for eurosport - #M760

  2.98 $

• 

  KOFORD Ø2 mm AXLE, selection (length 55 mm) - #M639

  2mm ultraprecision premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground. One per package

  2.79 $

• 

  SLICK7 3/32" (2.36 MM), .005" (0.127 MM) THICK, STEEL AXLE SPACERS, 10 pcs. - SL7-21

  3/32" (2.36 MM), .005" (0.127 MM) THICK, STEEL AXLE SPACERS, 10 pcs.

  1.98 $

• 

  ZHB Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.

  Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.

  2.00 $

• 

  KOLHOZA SHIELDED BALLBEARING 3 x 7 x 3 mm FOR TIRE TRUERS KZA006, KZA0061 - KZA0066

  Reserve shielded ballbearing 3x7 mm for TIRE TRUERS KZA006, KZA0061

  2.00 $

• 

  SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012

  SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012

  2.25 $

• 

  SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20

  SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20

  2.25 $

• 

  JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10

  JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10

  2.00 $

• 

  CAHOZA Ø2 mm AXLE (length 55 mm) - #24

  SOLID AXLE 2MM
  solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), length is 51mm (2") the best axle ever available for Scale racing

  5.20 $

• 

  JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100

  JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100

  17.99 $

• 

  KOFORD EDM Drilled (.040" hole) Ø2 mm AXLE, selection - #M743

  KOFORD EDM Drilled Ø2 mm AXLE, selection

  EDM drilled, 2mm .040 hole qualifying/race axle. premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground.

  17.98 $

• 

  CAHOZA EDM drilled (.040" hole) Ø2 mm hollow axle - #24-H

  CAHOZA EDM drilled (.040" hole) Ø2 mm hollow axle - #24-H

  The axle is drilled by EDM, hole diameter is 1.0mm (.04"), axle is very accurate, although the axle is lightened it is still strong

  18.20 $

• 

  ZHB Ballbearing 1.5 х 4 х 1.2 mm open , 6 balls - 1 Pc.

  Ballbearing 1.5 х 4 х 1.2 mm  open , 6 balls - 1 Pc.

  2.00 $

• 

  JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9

  JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9

  Old catalog #JK55012

  2.47 $

• 

  KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266

  .003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag

  4.46 $

• 

  VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm) - #A1000

  VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm)

  Axles are made of hardened tool steel 60HRC.  Axles have the deflection to the limit of 0.01 mm and the tolerance of the diameter 0.002 mm.

  7.14 $

• 

  KOFORD 3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #M546-1

  3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN  PRODUCTION CHASSIS, pair

  2.20 $

• 

  KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546

  KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546

  8.10 $

• 

  CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36

  PHOSPHOR BRONZE SPACERS 0,1
  phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag

  5.20 $

• 

  SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #S7-96

  SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796 

  2.98 $

• 

  JK 3/32" x 3/16" (2.36 mm x 4.75 mm) AXLE OILITES IN PRODUCTION CHASSIS, pair - #U22

  JK 3/32" x 3/16" (2.36 mm x 4.75 mm) AXLE OILITES IN  PRODUCTION CHASSIS, pair - #U22

  Old catalog #JK5571

  1.50 $