ALPHA
-
ALPHA FULL APRON - #903
ALP903 -RACING APRONS - full apron, High quality, bright red aprons with the Alpha Logo
-
ALPHA REAR WHEEL TIRES SBR GREEN, pair - #GREEN
ALPHA REAR WHEEL TIRES SBR GREEN, pair
1 pair of yellow tires for Production 1/32 or other classes
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL
ALPHA REAR WHEEL TIRES SBR BEIGE, pair
1 pair of orange tires for Production 1/32 or other classes
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
ALPHA CUP POINT SCREWS Ø4/40" (Through-hole) IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #885
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
-
ALPHA CUP POINT SCREWS Ø4/40" (Through-hole) IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #885
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #886
-
PIRANIA SOFT Primo donuts 2019, inside Ø 9.5 mm, outside Ø20.3 mm, about 24 mm width, pair - #PIRGOLD07
REAR WHEEL TIRES PIRANIA, pair - #PIRANIA
This tires can use in all classes (except Production 1/32)
-
ALPHA Lead sheet thickness 1 mm, 37х25mm, SELFSTICK- #503
Lead sheet thickness 1 mm, 37 х 25 mm can help you to configure your chassis.
Self stick
-
PIRANIA SOFT Primo donuts 2020, inside Ø 9.5 mm, outside Ø21.6 mm, about 32,5 mm width, pair - #PIRGOLD2020
REAR WHEEL TIRES PIRANIA, pair - #PIRANIA Primo
Enough for two 1\32 wheels if carefull cut donuts on half
-
ALPHA TUBE FOR ARMATURE, Ø13,5 mm - #RT13.5
TUBE FOR STORAGE ARMATURE, Ø13,5 mm
-
ALPHA TUBE FOR ARMATURE, Ø15,5 mm - #RT15.5
TUBE FOR STORAGE ARMATURE, Ø15,5 mm
-
ALPHA RECTANGULAR MOTOR BOX, plastic - #ALPMB
Clear styrene plastic, rectangular snap lid motor boxes with red foam.
-
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
-
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #886
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #886
-
ALPHA Tubes for wheels (dia. about 28.1 mm, hei. 50.8 mm) - #BTLS-7
ALPHA Tubes for wheels, big
Parameters:
- Diameter, mm: 28.1
- Height, mm: 50.8
-
ALPHA T-SHIRT,SIZE-L - #900L
ALPHA T-SHIRT,SIZE-L - #900L
-
ALPHA T-SHIRT, SIZE-XL - #900XL
ALPHA T-SHIRT,SIZE-XL - #900XL
-
ALPHA MODEL WHEELS PIRANIA 3/32" AXLE, 20MM WIDTH, ON DURALUMIN RIMS, pair - #4118
MODEL WHEELS PIRANIA 3/32" AXLE, 20MM WIDTH, ON DURALUMIN RIMS, pair - #4118
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 20
- Rims material: duralumin
- Tire: PIRANIA
- For classes scale: 1/24
-
ALPHA PIRANIA SOFT donuts 2021, inside Ø 9.5 mm, outside Ø21.1 mm, about 26.6 mm width, pair
ALPHA PIRANIA SOFT donuts 2021, pair
- inside Ø 9.5 mm,
- outside Ø21.1 mm,
- about 26.6 mm width.
-
ALPHA REAR WHEEL TIRES PIRANIA, pair - #PIRANIA
REAR WHEEL TIRES PIRANIA, pair - #PIRANIA
This tires can use in all classes (except Production 1/32)
-
ALPHA Teflon spring insulation, hank - #501
ALPHA Teflon spring insulation, hank - #501
The same bright red unmeltable spring insulation, but now with an even smaller outside diameter to allow that extra bit of room you need. It also slides on the spring more easily