HORKY
-
HORKY 2024 F1-32 Chassis Assembled without ballbearings (picture can be not actual)
It is delivered to order in the latest available version at the time of order.
-
HORKY PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
HORKY PINION 64PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
-
HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5
HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5
-
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 mm- #44-2mm
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 мм - #44-2mm
-
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 mm - #BH44-2mm
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 мм - #BH44-2mm
-
HORKY 2024 ES 1/32 Chassis Assembled without ballbearings (picture can be not actual)
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
HORKY 2024 ES 1/24 chassis assembled without ballbearings (picture can be not actual)
It is delivered to order in the latest available version at the time of order.
-
HORKY Crown gear 64-72 pitch 30 teeth, 2 mm axle, Ø13.05 mm, green - HOR#F1-2 mm
This gear used in Formula 1/32
Producer declared 64 pitch, but traditionally we use pinions 72 pitch with this gears
At the same time, how I know, pinions 64 pitch also can work with this gears
-
HORKY 2024 OPEN-12 chassis assembled without ballbearings (picture can be not actual)
It is delivered to order in the latest available version at the time of order.
-
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
-
HORKY CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32
CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32
Manufacturer says, that this is 64 pitch, but we (traditionally:)) use it with 72 pitch pinions.
At the same time, how I know, 64 pitch pinions could also work with this gears.
-
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
-
HORKY PINION 80 PITCH, 6T, 1.5 mm bore, EDM
HORKY PINION 80 pitch 6 teeth, EDM, shaft 1.5 mm
Electrical discharge machining (EDM)
-
MOTOR HORKY (under order), assembly
Motors supplied under order. Delivery time from 1 month to 1 year. Also, price can change depending on the terms of delivery.