Falcon, Hawk & Johnson Motors

• 

  ZHB MOTOR (anologue of FALCON 4)

  Analogue of FALCON 4 motor. Excellent motor for 1-st year study models. On the speed characteristics is close to the FALCON 7 motor. The armature is wound with a rather thick wire and has a cast collector.

  6.00 $

• 

  H&R LIGHTING II 40,000 RPM MOTOR (analogue of FALCON 4) - HRLMII

  A close analogue of the motor FALCON 4, which had been removed from manufacturing.

  In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.

  9.95 $

• 

  JKP HAWK 25 MOTOR 25,000RPM (analogue of FALCON 4) - JK303025

  A close analogue of the motor FALCON 4, which had been removed from manufacturing.

  In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.

  11.95 $

• 

  JKP HAWK 7 MOTOR 48,000 RPM - JK30307

  HAWK 7 MOTOR 48,000 RPM

  12.95 $

• 

  JKP Direct Drive Motor for C10 1/32 Direct Drive Chassis - #JKP-DD

  JKP Direct Drive Motor for C10 1/32 Direct Drive Chassis

  12.95 $

• 

  JKP Hawk Retro Motor - #JKPR

  JK Hawk Retro Motor, copper brush tab for better conductivity, Same wind and performance as Falcon 7

  12.95 $

• 

  JKP Hawk MB Motor - #JKPMB

  Introducing our newest motor, the Hawk™ MB (yes, a Hawk mini-brute).

  We received requests from raceways and racers to make a replacement motor so we did. We tried to match the performance as close to the mini-brute as possible and our pre-release testing showed it to be extremely close

  13.53 $

• 

  PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641

  Brush Hood & Heat Sink set

  7.98 $

• 

  JK Hawk 11 extreme performance drag motor - #JKM11

  Hawk 11 Precision Balanced Extreme Performance Motor, FK Sized, recommended for drag use only.

  15.90 $

• 

  JKP HAWK MOTOR W/NEW OPTIONAL ENDBELL - JK3031

  HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  16.95 $

• 

  PROSLOT Euro MK 1 Minican Motor - #PS-4002

  Euro MK 1 Motor - 47,000 + rpm, 160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing.

  17.95 $

• 

  KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647

   JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.

  63.82 $

• 

  JKP HAWK MOTOR SET UP, W/MAGNETS & ENDBELL - #30301

  HAWK MOTOR SET UP, W/MAGNETS & ENDBELL

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  11.95 $

• 

  JKP ENDBELL FOR HAWK MOTOR W/EXTENDED BRUSH HOODS FOR SET OPTIONAL ARMATURE PROSLOR#4016 - #30303

  ENDBELL FOR HAWK MOTOR W/EXTENDED BRUSH HOODS FOR SET OPTIONAL ARMATURE PROSLOR#4016

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  7.95 $

• 

  JKP REPLACEMENT ENDBELL FOR HAWK 3030/30, ALUMINIUM - #JKP30303AL

  New improved - Upgraded Aluminum endbell for Hawk 3030 and 30306 motors

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  19.95 $

• 

  JKP NEODYMIUM MAGNETS FOR HAWK MOTOR - #30361

  NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  7.96 $

• 

  JKP HAWK MOTOR ARM - #JKP30302

  Basic HAWK motor armature. It can be used in Proslot EURO MK motors

  6.50 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  0.30 $

• 

  TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16

  These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.

  1.20 $

• 

  PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED RUS - #4016

  HAWK REPLACEMENT ARMATURE W/MARKED RUS

  Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules

  31.50 $

• 

  KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644

  Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.

  37.79 $

• 

  KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40

  G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.

  45.40 $