Parts & Details for Build "TEAPOT" Models
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK, for Phillips-head screwdriver, 1 pc. - #25196
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK HEAD, for Phillips-head screwdriver, 1 pc. - #25196
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540
FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR - #540
This rims is made for pressing on the axle!
PARAMETERS
- dia., mm: 14
- width for gluing tires, mm: 5,5
- total width, mm: 12
- dia. of holes for set on axle Ø2 mm., mm : 1,8
-
ASSOCIATED STEEL NUT M2, 1 pc. - #25214
STEEL NUT M2, 1 pc.
Steel nut for fixing guides
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
Suitable for 16 mm gears.
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR02
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. Full cut details kit, ready for build by rivets - #IR04
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Full cut details kit, ready for build by rivets
-
S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
This rims is made for pressing on the axle!
PARAMETERS
- dia.,mm: 14
- width for gluing tires, mm: 13
- total width, mm: 17,9
- dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR06
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR07
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis parts - #IR08
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1/32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis parts
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, w/drawing of the chassis parts
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 1,5 mm w/foil
- w/drawing of the chassis details
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, w/drawing of the chassis parts
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 2 mm w/out foil
- w/drawing of the chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR09
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR10
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, full cut details kit, ready for assembly by the rivets
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 1,5 mm w/foil
- full cut details kit, ready for assembly by the rivets
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, full cut details kit, ready for assembly by the rivets
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 2 mm w/out foil
- full cut details kit, ready for assembly by the rivets
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART". SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR11
KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart"
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24 "Standart"
- Scale: 1/24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis details