Lead Wire
-
TQ LEAD WIRE 20Ga (section 0,52 mm²), black, 3 m (10 ft) - #TQ201
10 feets of 20 gauge Black wire
-
TURNIGY LEAD WIRE 24Ga (section 0,21 mm²), yellow, 1 m
LEAD WIRE 24Ga (section 0,21 mm²), yellow, 1 m
-
SLICK 7 Lead wire 22Ga (section 0,33 mm²), yellow, 1 m (3 ft) - #S7-612
SLICK 7 Lead wire 22Ga (section 0,33 mm²), yellow, 1 m (3 ft)
Super flexible, ultra light silicon lead wire, allow to transmit the most power to the motor.
-
MID AMERICA LEAD WIRE 22Ga (section 0,33 mm²), orange, 3 m (10 ft) - #MID140
MID AMERICA LEAD WIRE 22Ga (section 0,33 mm²), orange, 3 m (10 ft) - #MID140
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft) - #S7-546
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 3 m (10 ft) - S7-553
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), red, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), red, 1 m
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
SLICK7 LEAD WIRE 20Ga (section 0,52 mm²), yellow, 35 cm - #S7-213 - 35
GOLDEN SILICON WIRE 35 cm
-
MID AMERICA Lead wire 20Ga (section 0,52 mm²), clear, 3 m (10 ft.) - #MID143
MID AMERICA Lead wire 20Ga (section 0,52 mm²), clear, 3 m (10 ft.)
Ultraflex lead wire
-
TQ CLEAR LEAD WIRE 18Ga (0,82 mm²) W/SILVER CLIPS, clear, 35 cm- #TQ136
Lead wire with Silver Clips soldered on. 18 gauge, 441 strand bare copper conductor resists breakage and has a flex that is a little stiffer than Superflex wire. The lightweight CLEAR insulation makes it easier to tell when your wires are frayed and need replacement.
310 mm lenght - complect for a model!
-
PARMA LEAD WIRE 18Ga. (SECTION 0,82 mm²) BLACK SILICONE 1 FOOT (30 sm)- #489
Complect for a model
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.) - #M431
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.)
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Three foot length of our 413 strand light weight ultraflex lead wire
-
PRO SLOT LEAD WIRE 18Ga (0,82 mm²) with soldered copper clip on both ends, pink, 40 cm - #PSL620
DRAGSTER LEAD WIRE WITH CLIPS - 40 cm long with nickel plated guide clips
-
JK Lead wire 18Ga (section 0,82 mm²), transparent, 1 m (3 ft) - #U52-3
UberFlex Lead Wire 18 AWG - 444 strand high purity copper silicone jacket 3 ft
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 1 m (3 ft) - #PS-621
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 3 m (10 ft) - #PS-622
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
PARMA LEAD WIRE 18GA. (SECTION 0,82 mm²) BLACK SILICONE (3 M)- #492
One bulk piece of high performance 18 gauge silicone for upgrading RTR cars, etc. Use with #666 brass guide clips.