Tire Donuts

• 

  BSV LUXURY Donuts, inside Ø 10.2 mm (.400"), outside Ø 21.5 mm (.854"), about 34 mm (1.338") width, pair

  BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair

  Good for Production & Eurosport.

  6.00 $

• 

  BSV LUXURY Donuts, inside Ø 9.3 mm (.370"), outside about Ø 19 mm (.750"), about 34 mm (1.338") width, pair

  BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair

  Good for Production & Eurosport.

  6.00 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 25
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair

  Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: ~ 33
  • Width, mm: 22

  This tires cut for GM & F1/24 (Nesterenko)

  0.50 $

• 

  Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair

  Good grip donuts for club races.

  Better alternative for Pirania Light and Super Natural.

  2.00 $

• 

  ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT

  ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT

  1 pair of green treated tires for Production 1/32 or other classes

  1.80 $

• 

  ALPHA Rear wheel donuts GREEN, pair - #GREEN

  ALPHA Rear wheel donuts GREEN, pair - #GREEN

  1 pair of green tires for Production 1/32 or other classes

  2.50 $

• 

  ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL

  ALPHA REAR WHEEL TIRES SBR BEIGE, pair

  1 pair of orange tires for Production 1/32 or other classes

  1.80 $

• 

  JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F

  JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F

  PARAMETERS

  • Inside dia., in (mm): .375 (9,52)
  • Outside dia., in (mm): .850 (21,6)

  6.00 $

• 

  KLINGON Donuts, inside Ø 8.5 mm, outside Ø 24 mm, about 20.5 mm width, pair

  5.50 $

• 

  JK SBR Rear wheel tires supernatural, 0.440"ID x 1.200"OD, pair - #D32

  JK SBR Rear wheel tires supernatural, 0.440"ID x 1.200"OD, pair - #D32

  This tires can use in all classes (except Production 1/32)

  2.15 $

• 

  JK Rear wheel tires D4 0.375"ID x 0.850"OD Natural Donut, pair - #DS/L

  JK Rear wheel tires D4 "natural donut", pair - #DS/L

  PARAMETERS

  • Inside dia., mm: 9,5
  • Outside dia., mm: 21,5
  • Made for rims, dia., mm: 10

  These tires can use in all classes

  Old catalog #JKP-D4

  7.87 $

• 

  JK Natural rubber donuts (JKP-D5) inside Ø10,8 mm (.425"), outside Ø24,76 mm (.975"), pair - #DML/LB

  JK Natural rubber donuts (JKP-D5)

  PARAMETERS

  • Inside dia.: 10,8 mm (.425")
  • Outside dia.: 24,76 mm (.975").

  
  

  Old catalog #JKP-D5

  8.04 $

• 

  SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair - #SF70100

  SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair

  1 Pair Slot Fox Natural Rubber Donuts for Drag Racing, Replace worn out drag tires and keep your expensive hubs without replacement cost.

  5.50 $