80 Pitch Pinion Gears

• 

  ARP Pinion 80 PITCH 6T, 0° angle, 1.2 mm bore, heat treated - #ARP8006H

   These are heat treated 80 pitch 6 tooth pinions with a 1.2 mm bore. Certified to RC55

  10.95 $

• 

  YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM

  YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM

  Manufactured on the Japan EDM machine AMADA. High quality swiss steel.

  6.00 $

• 

  ARP PINION 80 PITCH 6T, 0° angle,1.5 mm bore- #ARP8006

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  7.96 $

• 

  CAHOZA Black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13

  CAHOZA Black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13

  EDM pinions 80 pitch 6T - 1,5mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears

  29.00 $

• 

  HORKY PINION 80 PITCH, 6T, 1.5 mm bore, EDM

  HORKY PINION 80 pitch 6 teeth, EDM, shaft 1.5 mm 

  Electrical discharge machining (EDM) 

  29.41 $

• 

  CAHOZA Black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A

  CAHOZA Black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A

  EDM pinions 80 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears

  31.20 $

• 

  YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM

  YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM

  Manufactured on the Japan EDM machine AMADA. High quality swiss steel.

  6.00 $

• 

  ARP PINION 80 PITCH, 7T, 0° angle, 1.5 mm bore - #ARP80077

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  
  

  7.99 $

• 

  ARP PINION 80 PITCH, 8T, 0° angle, 1.5 mm bore - #ARP800

  Very good alternative for HORKY pinions. One hundred percent ratio of price/quality

  More smaller wear resistance, but enought soft work of gear

  5.00 $