Все товары
-
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
DUBICK Controller chip 95 Ohm for DUBICK Electronic controller - #722-95
DUBICK Controller chip 95 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 113 Ohm for DUBICK Electronic controller - #722-113
DUBICK Controller chip 113 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 144 Ohm for DUBICK Electronic controller - #722-144
DUBICK Controller chip 144 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 194 Ohm for DUBICK Electronic controller - #722-194
DUBICK Controller chip 194 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 238 Ohm for DUBICK Electronic controller - #722-238
DUBICK Controller chip 238 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 290 Ohm for DUBICK Electronic controller - #722-290
DUBICK Controller chip 290 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 319 Ohm for DUBICK Electronic controller - #722-319
DUBICK Controller chip 319 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 348 Ohm for DUBICK Electronic controller - #722-348
DUBICK Controller chip 348 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 377 Ohm for DUBICK Electronic controller - #722-377
DUBICK Controller chip 377 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip (custom resistance) for DUBICK Electronic controller
DUBICK Controller chip (custom resistance) for DUBICK Electronic controller
-
NEAN BLACK CONTROLLER HANDLE, small - #171
Replacement controller handle for Controllers
-
NEAN BLACK CONTROLLER HANDLE, big - #172
Replacement controller handle for Electronic Controllers
-
DIFALCO Orange controller handle w/hardware - #DD849
Orange Lexan controller handle with hardware
-
ARP PINION GEAR 64 PITCH, 7T, 0° ANGLE, , 2 mm bore - #6407
ARP PINION GEAR 64 PITCH, 7T, 0° ANGLE, , 2 mm bore
-
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
EDM pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
OLEG Body Retro 1/24 March 707, Lexan .010" (0.254 mm) - #0125
Retro 1/24 March 707 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
PROSLOT VIP C-CAN SETUP KIT W/O MAGNETS - #PS-749VIP
C-can Setup kit (without magnets). Prepared set of C-CAN X-12, w/out magnets. The can looks like the photo.
-
R-GEO Cahoza gear driller - #615
R-GEO Cahoza gear driller - #615
Tool for decrese the total weight of the gear.
See the description on the following photo.
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM RED BULL, Lexan .007" (0.175 mm) - #0121I
Custom Painted Body Production 1/24 Audi RS5 DTM RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body