Все товары
-
BPA Clear body ES-G12 Toyota GT ONE GB, lexan, thickness .007" (0.175 mm) - #K 033
Clear body ES-G12 Toyota GT ONE GB
- Made from: Polycarbonate (Lexan)
- For: ES-G12
- Thickness: .007" (0.175 mm)
- Clear body w/paint mask.
-
BPA Clear Body ES G12-24 outlaw Bentley WR, Lexan .005" (0.125 mm), with paint mask - #K 043-005
Clear Body ES G12-24 outlaw Bentley WR
- Made from: Polycarbonate (Lexan)
- For: ES G12-24 outlaw
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body ES G12-24 outlaw Bentley WR, Lexan .007" (0.175 mm), with paint mask - #K 043-007
Clear Body ES G12-24 outlaw Bentley WR
- Made from: Polycarbonate (Lexan)
- For: ES G12-24 outlaw
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body ES G12-24 Bentley EXP GB, Lexan .005" (0.125 mm), with paint mask - #K 044-005
Clear Body ES G12-24 Bentley EXP GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body ES G12-24 Bentley EXP GB, Lexan .007" (0.175 mm), with paint mask - #K 044-007
Clear Body ES G12-24 Bentley EXP GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body ES G12-24 Lola GB, Lexan .005" (0.125 mm), with paint mask - #K 049-005
Clear Body ES G12-24 Lola GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .005" (0.125 mm)
- Clear body
-
DUBICK Controller chip 29 Ohm for DUBICK Electronic controller - #722-29
DUBICK Controller chip 29 Ohm for DUBICK Electronic controller
-
KOLHOZA EUROSPORT 1/32 AUDI R15 TDI BODY, LEXAN, thickness .005" (0.125 mm) - #656-LT
EUROSPORT 1/32 Audi R15 TDI Body
ISRA LEGAL 2015-2020
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
-
DUBICK Controller chip 58 Ohm for DUBICK Electronic controller - #722-58
DUBICK Controller chip 58 Ohm for DUBICK Electronic controller
-
ZHB Digital Calipers 150 mm (6"). Accuracy: +/- .02mm/.001inch. Plastic box and 2 pc battery.
Specs:
Range: 0-150mm
Accuracy: +/- .02mm/.001inch
Resolution: .01mm/0.0005inch
Repeatability: 0.01mm/0.0005inch
Max Measuring Speed: 1.5m/s, 60inch/s (FAST)
Operating Temp: 0~40Deg Celcius
Storage Temp: -10~60Deg Celcius
Power: 1.5v SR44 Battery -
Slotracingshop.com Tire durometer w/protective hard shell plastic case
Tire durometer w/protective hard shell plastic case
-
DUBICK Anodized spring cups / 5 coil springs - #717
DUBICK Anodized spring cups / 5 coil springs
-
DUBICK Electronic controller Pro version
DUBICK Electronic controller Pro version
- -suitable for all classes of models;
- -more functional than S&K, Kobis or DiFalco controllers;
- -antibrake, antibrake correction;
- -wire CHOKE;
-traction control;
- -one or two transistors in use;
- -adjust the sharpness of the transistor;
- -15 chips;
- -built-in voltmeter;
- -gold-plated contact block;
- -full protection against incorrect switching on.
-
DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs. - #708
DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs.
-
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
PARMA SUPER BRAID CONDITIONER - #665А
Use our specially formulated braid conditioner to keep braid soft and pliable, great for breaking in and less resistance
-
REH PINION GEAR 48 PITCH, 6T , 2 mm bore, BRASS (This is press-on style pinion gear) - #REH6165
REH PINION GEAR 48 PITCH, 6T , 2 mm bore, BRASS (This is press-on style pinion gear) - #REH6165
-
DUBICK Pinion gear 48 pitch, 6T, 2 mm bore, brass (This is solder style pinion gear) - #501-6
48 pitch Straight stainless steel 6 tooth pinion gears
IN STOCK!
-
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406
Brass pin tubing for chassis 10.8 mm -4/10 of an inch.
-
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
Brass pin tubing for chassis 10.8 mm -4/10 of an inch
-
PARMA 4/40" ALLEN SCREW in rims & gears, 1 pc. - #555
Replacement 4/40 allen head set screws for Slot Car Front Wheels, Rear Wheels and Spur Gears.
-
KOLHOZA SHIELDED BALLBEARING 3 x 7 x 3 mm FOR TIRE TRUERS KZA006, KZA0061 - KZA0066
Reserve shielded ballbearing 3x7 mm for TIRE TRUERS KZA006, KZA0061
-
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
-
ZHB Organiser 104×176×23 mm, with 15 configurable compartments, clear plastic
PARAMETERS
- Material: Transparent plastic
- Dimension, mm: 75×60×18
- Quantity of sections, pcs.: 6
- *For small parts