Все товары
-
DIFALCO Silver Metallic controller handle w/hardware - #DD851
Silver Metallic Lexan controller handle with hardware
-
DIFALCO Gray Metallic controller handle w/hardware - #DD852
Gray Metallic Lexan controller handle with hardware
-
PARMA LOW PROFILE BLADE GRAPHITE GUIDE CUT DOWN - #70223
The Cut Down Blade was designed for high end racing for maximum ride height adjustability. It will lower the front of chassis .030". Material is milled from top of guide around bottom of post. Use with #70235 Spacers to adjust ride height from .010" to .020" if needed.
-
BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435
BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
Old catalog #JK42351
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø9.5 mm, ultra light(1,32 gr/pair)
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,32
ON PHOTO RIMS WIDTH 20 MM!!
-
CAHOZA Horizontal motor brushes, pair - #351
CAHOZA Horizontal motor brushes, pair - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
CAHOZA Horizontal motor brushes, 10 pairs - #351
CAHOZA Horizontal motor brushes, 10 pairs - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
SONIC Replacement tire wrench tip .050", straight - #51-50TR
SONIC Replacement tire wrench tip .050", straight - #51-50TR
Fits most wrench handles. .050" tip fits Euro-Style wheels.
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019, Lexan .007" (0.175 mm) - #0141B
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019 - #0141B
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body (painted without stickers)
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
Old catalog #JK4235F
-
S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564
S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564
-
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B
CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B
Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
CAHOZA M1 Screw & Insulator, 1 set - #113
CAHOZA M1 Screw & Insulator, 1 set
stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators
-
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RAPTOR PRO FK MOTOR - DOUBLE BALL BEARING. recommended gearing 13/33 road course / 16/54 drag racing . Approx 55k rpm
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair
KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair
Width is about 19.5 mm till 19.9 mm.
You can use this donuts in 1/24 scale if you can mounting them very precision.
-
MID AMERICA Aero Guide flag, cut down, red nylon, unthreaded - #MID130UC
MID AMERICA Aero Guide flag, cut down, red nylon, unthreaded - #MID130UC
-
B52 50,000rpm Mini Motor - #B52-50
B52 50,000rpm Mini Motor
Ball bearing at both ends, 50,000 rpm, super dynamic balance, best in the business bar none, close performance between motors