Все товары

• 

  DenVel electonics Stand for magnets tests - #MT1

  Stand for magnets tests. Indispensable in the selection of magnets.

  Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE

  90.00 $

• 

  DenVel electonics Stand for magnets tests, w/external sensor, v.2 - #MT v2

  Magnet tester #MT v2 - a device for measuring the magnetic field strength of magnets.

  Link to video review

  150.00 $

• 

  ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft) - #AL510B

  ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft)

  It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.

  3.00 $

• 

  PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013

  Speed Fx Motor springs - Double Overhead 

  1.17 $

• 

  JK Motor springs M3 & M6 (L&R), 2 coils - #M36G

  JK Motor springs M3 & M6 (L&R), 2 coils - #M36G

  Old catalog #JK303066

  2.90 $

• 

  DIFALCO Silver Metallic controller handle w/hardware - #DD851

  Silver Metallic Lexan controller handle with hardware

  18.00 $

• 

  DIFALCO Gray Metallic controller handle w/hardware - #DD852

  Gray Metallic Lexan controller handle with hardware

  18.00 $

• 

  PARMA LOW PROFILE BLADE GRAPHITE GUIDE CUT DOWN - #70223

  The Cut Down Blade was designed for high end racing for maximum ride height adjustability. It will lower the front of chassis .030". Material is milled from top of guide around bottom of post. Use with #70235 Spacers to adjust ride height from .010" to .020" if needed.

  3.50 $

• 

  BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435

  BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435

  3.70 $

• 

  JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635

  JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635

  Old catalog #JK42351

  4.99 $

• 

  BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,5332lig

  BSV Plastic rims

  • For 3/32" axle; 
  • Width 16 mm;
  • Dia. 9.5 mm;
  • Ultra light.

  4.90 $

• 

  BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,5332ligof

  BSV Plastic rims

  • For 3/32" axle; 
  • Width 16 mm;
  • Dia. 9.5 mm;
  • W/offset of the hub for ES 1/32 & Production 1/32
  • Ultra light.

  4.90 $

• 

  S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø9.5 mm, ultra light(1,32 gr/pair)

  PARAMETERS

  • axle, mm.: 2,36
  • width, mm: 16
  • dia.,mm: 9,5
  • weight per pair, gr/pair: 1,32

  ON PHOTO RIMS WIDTH 20 MM!!

  6.91 $

• 

  SONIC Replacement tire wrench tip .050", straight - #51-50TR

  SONIC Replacement tire wrench tip .050", straight - #51-50TR

  Fits most wrench handles. .050" tip fits Euro-Style wheels.

  8.22 $

• 

  OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019, Lexan .007" (0.175 mm) - #0141B

  OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019 - #0141B

  • Made from: Polycarbonate (Lexan)
  • For: Formula 1/24
  • Thickness: .007" (0.175 mm)
  • Custom painted body (painted without stickers)

  20.00 $

• 

  JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N

  JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N

  Old catalog #JK4235F

  4.99 $

• 

  S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564

  S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564

  4.20 $

• 

  CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6

  CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6

  Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,

  4.90 $

• 

  CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B

  CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B

  Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant

  6.20 $

• 

  JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12

  JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12

  Old catalog #JK9171

  9.99 $

• 

  CAHOZA M1 Screw & Insulator, 1 set - #113

  CAHOZA M1 Screw & Insulator, 1 set

  stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators

  2.00 $

• 

  RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR

  RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR

  RAPTOR PRO FK MOTOR - DOUBLE BALL BEARING. recommended gearing 13/33 road course / 16/54 drag racing . Approx 55k rpm

  15.95 $

• 

  KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036

  KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036

  • Made from: Polycarbonate (Lexan)
  • For: Formula 1/32
  • Thickness: .005" (0.125 mm)
  • Custom painted body

  25.00 $

• 

  KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair

  KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair

  Width is about 19.5 mm till 19.9 mm.

  You can use this donuts in 1/24 scale if you can mounting them very precision.

  5.50 $