Все товары
-
KOFORD Ø.498" (12.65 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-498
In stock
One of the most used sizes for ES32 and ES24!
-
KOFORD Ø.500" (12.7 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-500
In stock
One of the most used sizes for ES32 and ES24!
-
Koford Yellow spoiler sticker, 1 pc. - #M719
Koford Yellow spoiler sticker, 1 pc. - #M719
Decorate your body with branded stickers :)
-
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
-
CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157
ANODISED SPRING POSTS - 5 COIL SPRINGS
aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag -
ATTAN Gear holder (2 mm & 3/32" axles) for straightness checker for axle, rim & gear
ATTAN Gear holder (2 mm & 3/32" axles) for straightness checker for axle, rim & gear
-
TAMIYA 1/14 R/C Mercedes-Benz Race Truck Actros MP4 MB Motorsport (TT-01 Type-E) - #58683
TAMIYA 1/14 R/C Mercedes-Benz Race Truck Actros MP4 MB Motorsport (TT-01 Type-E) - #58683
For more information click here: https://www.tamiya.com/english/products/58683/index.htm
-
TAMIYA Masking tape for curves, width 2 mm - #TAM87177
TAMIYA Masking tape for curves, width 2 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 3 mm - #TAM87178
TAMIYA Masking tape for curves, width 3 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
PARMA 500 SERIES MOTOR SPRINGS - #500D
Replacement springs for all 16D motors
-
JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50
JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50
Old catalog #JKP9171
-
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209
Lead sheet thickness 0.5 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
Lead sheet thickness 1 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Controller chip 78 Ohm for DUBICK Electronic controller - #722-78
DUBICK Controller chip 78 Ohm for DUBICK Electronic controller
-
BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle - #BSV7237332
BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle - #BSV7237332
-
DUBICK Plastic box 75 х 132 х 16 mm (2.96" x 5.2" x 0.63") w/12 individual boxes - #DB214
DUBICK Plastic box 75 х 132 х 16 mm (2.96" x 5.2" x 0.63") w/12 individual boxes
- Material: plastic with transparent cover.
- Dimension, mm (in.): 75 х 132 х 16 mm (2.96" x 5.2" x 0.63").
- Quantity of sections, pcs.: 40.
- Small storage box for parts great for storing pinions etc.
-
PARMA BIG MAMA 408 BRAID, 1 PAIR - #663-1
Heavy duty braid (408 strands) for all slot cars. 1 Pair
-
PARMA BIG MAMA 408 BRAID, 100 PAIRS - #663-B
Heavy duty braid (408 strands) for all slot cars. 1 Pair
-
MID AMERICA 300 strand braid, .022" thick, 1 pair - #MID400
MID AMERICA 300 strand braid, .022" thick, 1 pair - #MID400
-
MID AMERICA 300 strand braid, .022" thick, 10 pairs - #MID400
MID AMERICA 300 strand braid, .022" thick, 10 pairs - #MID400
-
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
Pinions are EDM made from hardened tool steel. The shapes of the tooth were computer designed for low friction and the best run. Round running of the pinions is to the limit of 0.01 mm.
-
HORKY PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
HORKY PINION 64PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2