Все товары
-
ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a
ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a
72 pitch stainless steel 14 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s
ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s
72 pitch stainless steel 15 tooth pinion gears heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a
ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a
72 pitch stainless steel 15 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
-
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR - #543
PARAMETERS
- axle, mm: 2,36
- dia., mm: 14
- width, mm: 16,5
-
ARP PINION 80 PITCH, 8T, 0° angle, 1.5 mm bore - #ARP800
Very good alternative for HORKY pinions. One hundred percent ratio of price/quality
More smaller wear resistance, but enought soft work of gear
-
S&K GEAR 64 PITCH, 49T, 0° angle, 3/32" axle, Ø20.4 mm - #G64349
The long-awaited anologue of 45 teeth gear from Horky. Maximal quantity of teeth for TEAPOT models in St.Petersburg, in which definite the min. diameter of rear wheels (22 mm) and height of rear axle - 11.5 mm.
Also, this gear perfect to GM-class.
-
BSV Gear 64 pitch, 50T, 0° angle, 3/32" axle, Ø20.67 mm
BSV Gear 64 pitch, 50T, 0° angle, 3/32" axle, Ø20.67 mm
-
ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416
ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416
-
CAHOZA GEAR 72 PITCH, 44T, 16° angle, 3/32" axle, Ø16.00 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D
JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D
Old catalog #JK724415
-
ATTAN POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE - #ATT8045
ATTAN POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE - #ATT8045
-
JK 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6mm glued on 3/32" axle ProSlot - ZHB#215
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#216
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#217
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB GEAR HORKY 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#218
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $2.5 (ZHB#109)
-
PARMA ALLEN HEAD MOTOR SCREW, Ø2.3 mm, 1 pc. - #484
Allen Head Screws for mounting motor to chassis
-
CAHOZA Polymer gear 80 PITCH, 45T, 0° angle, HIGHLY DURABLE, 3/32" axle, Ø14,80 mm - #1-B
CAHOZA Polymer gear 80 PITCH, 45T, 0° angle, HIGHLY DURABLE, 3/32" axle, Ø14,80 mm
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester.
-
CAHOZA POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, BIG HUB, 3/32" AXLE, Ø14,9 mm, harder - #1-B
HIGHLY DURABLE GEARS 80 PITCH
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 45 teeth -
HORKY BIG HUB 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#219
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
DUBICK JK style body mounting clips, pair - #DB601
DUBICK JK style body mounting clips, pair - #DB601
Body mounting clip - same size as JK 9008
-
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
-
JK Silver plated copper guide clips, pair - #U60
JK Pro Silver Plated Copper Guide Clips (pr)
-
JK silver plated copper guide clips, long, pair - #U28
JK silver plated copper guide clips, long, pair - #U28