Все товары
-
PARMA Crown gear, 48 pitch 26-33 teeth,1/8" axle, with screw (special order)
Special order.
King Crown Gears feature light weight, less friction and great gear mesh for inline chassis (Womp-Womp, EDGE and HoleShot Drag Cars, Etc.) They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
PARMA Crown gear, 48 pitch 26-33 teeth,1/8" axle, includes hub adaptor 1/8" to 3/32", with screw (special order)
Special order. Includes hub adaptor from 1/8" (3.15mm) to 3/32" (2.36 mm)
King Crown Gears feature light weight, less friction and great gear mesh for inline chassis (Womp-Womp, EDGE and HoleShot Drag Cars, Etc.) They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
DUBICK Set #1 of 2 mm inside diameter aluminium tubes ( 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")) - #DB712
DUBICK Set of 2 mm inside diameter aluminium tubes - #DB712
In set 1 pc of each size: 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")
-
ZHB "TEAPOT" 1/24 KIT - # K035
ZHB "TEAPOT" 1/24 KIT - # K035
Kit with cut on half depth of chassis details, PROSLOT SpeedFX S16D motor, collapsible rear bridge with ballbearings, 64 pitch gears (64 pitch motor pinion, steel, 8T), KrickKr red tires, unpainted Subaru Lexan body
-
PARMA 16D Armature spacers - #500G
PARMA 16D Armature spacers - #500G
Replacement armature bushings for all 16D motors, 6 pieces.
-
JK Clip for C62 chassis, 1.5" spacing, 1 pair - #U30
JK Clip for C62 chassis, 1.5" spacing, 1 pair - #U30
Old catalog #JK90062
-
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
Clip for C21, C24, C25, C26, C40, C41, C45, C55, C60, C64, C80, C81 Chassis
Old catalog #JK9008
-
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
Clip for C1, C5, C10, C30, C35, C93 Chassis, 2" Spacing
Old catalog #JK9010
-
PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724
PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724
Armature Spacer Kit - Includes 2 phenolic and 8 brass motor spacers
-
ZHB PRODUCTION RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $59 to $185. Depending on the class and configuration.
The photos of my models are posted. New models will look more beautiful!
The average price of the model is indicated.
-
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" 1 pc - #C40
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" - #C40B
Old catalog #JK250115
-
SLICK7 1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair - #SL7-244
1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair
-
PARMA 1/8" X 1/4" FLANGED OILITES,1 pair - #623А
Use for adding 1/8" diameter axle to slot car chassis with 1/4" hole. Raised Speed Ring reduces friction for increase in speed. (Requires one pair per axle.)
-
SLICK7 3/16" X 1/4" (4.76 X 6.15 MM) REDUCER BUSHING, pair - #SL7-142
REDUCER BUSHING MOUNTS 3/32 BEARINGS ON 1/8
-
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
1/32 Center Section replacement for X32 Chassis JKP 1/32 CHEETAH 11 CHASSIS for PRODUCTION 1/32 - #JKPHC1132 & JKP 1/32 CHEETAH.11 CHASSSIS KIT W/1PAN for PRODUCTION 1/32- #JKPX32
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
Old catalog #HC1132P
-
ZHB ISRA-CLASSES RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $300 to $500 and more.... Depending on the configuration. Those. It can be chassis DUBICK, HORKY or CASTRICONE, And motors: setups: ZHB, VALIKO, VOKI, CAHOZA, HORKY or Machkoza, with different armatures.
Delivery of any configurations is possible !!! The average price of the model is indicated.
-
DIFALCO HD30 1/24 UPGRADE KIT - #DIF261
HD30 Upgrade PCB: Convert your 10 or 15 band Pro Plus or Fanatic controller to our new 30 band high definition design. You get the HD30 circuit board with a standard 148 ohm network board installed. Simply unsolder a few wires and remove the old PCB. Transfer the original brake and sensitivity rheostats over to the new HD30 board. Now bolt the PCB to the frame and solder a few wires to their correct positions. Simple instructions included.
-
DIFALCO TURBO BLAST BASIC. KIT - #DIF704
40 amp (70 amp surge) high power relay installs easily on main wires. Includes instructions for all controllers as well as special parts and instructions for Difalco Design "E"Motion electronic controllers and modules. Text plus drawings make our kit easier to install than other brands!
-
ZHB BRAKE RHEOSTAT 4,7 OHM
It is wound by plane nichrom. Used in controllers made by Nesterenko A.I. But, it can work with any electonic controller
-
DIFALCO ADJUSTABLE BRAKE RHEOSTAT W/KNOB - #DIF806
Brake Rheostat, pro, with knob, variable with off position, reducing washers.