Все товары
-
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
-
WRIGHTWAY Paste flux - #WW10
WRIGHTWAY Paste flux - #WW10
Paste Flux in plastic syringe
-
KOLHOZA Clear Production 1/32 Peugeot body, Lexan thickness .005" (0.125 mm) - #0102T
Clear Production 1/32 Peugeot body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL
ALPHA REAR WHEEL TIRES SBR BEIGE, pair
1 pair of orange tires for Production 1/32 or other classes
-
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
-
KOFORD Ø2 mm AXLE, selection (length 55 mm) - #M639
2mm ultraprecision premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground. One per package
-
CAHOZA Ø2 mm AXLE (length 55 mm) - #24
SOLID AXLE 2MM
solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), length is 51mm (2") the best axle ever available for Scale racing -
ZHB Ballbearing 1.5 х 4 х 1.2 mm open , 6 balls - 1 Pc.
Ballbearing 1.5 х 4 х 1.2 mm open , 6 balls - 1 Pc.
-
ARP Pinion 80 PITCH 6T, 0° angle, 1.2 mm bore, heat treated - #ARP8006H
These are heat treated 80 pitch 6 tooth pinions with a 1.2 mm bore. Certified to RC55
-
KOLHOZA 1/24 Custom painted car interior, white, thin .005" (0,125 mm) - #0126-white
KOLHOZA 1/24 Custom painted car interior, white, thin .005" (0,125 mm) - #0126-white
-
KOLHOZA 1/24 Custom painted car interior, red, thin .005" (0,125 mm) - #0126-red
KOLHOZA 1/24 Custom painted car interior, red, thin .005" (0,125 mm) - #0126-red
-
KOLHOZA 1/24 Custom painted car interior, green, thin .005" (0,125 mm) - #0126-green
KOLHOZA 1/24 Custom painted car interior, green, thin .005" (0,125 mm) - #0126-green
-
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
-
KOFORD EDM Drilled (.040" hole) Ø2 mm AXLE, selection - #M743
KOFORD EDM Drilled Ø2 mm AXLE, selection
EDM drilled, 2mm .040 hole qualifying/race axle. premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground.
-
KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281
Self centering ultra light aluminum alloy spring cups for Koford set ups
-
MS-SLOTPARTS Gauge for cutting the braids
MS-SLOTPARTS Gauge for cutting the braids
Through the set dimension, cutting is always precisely at the same length. Unequal or cropped braids belong to the past.
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154
ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag -
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
Old catalog #JK55012
-
RED FOX C-can setup - #RFC0002
RED FOX C-can setup - #RFC0002
Only setup, without endbell, magnets, hardware & ball bearings.
-
KOLHOZA TIRE TRUER NEW - KZA0061
Updated configuration!
-
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
Specifications
★Length:438mm, Width: 190mm, Height: 207mm ★Wheelbase: 257mm ★Tire Width/Diameter: 28/70mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) -
ATTAN Rim drilling tool (2 mm axle) - #ATTRDT 2 mm
ATTAN Rim drilling tool (2 mm axle) - #ATTRDT 2 mm
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43