Все товары
-
MID AMERICA Guide nut - aluminum pin drive, black, 1 pc - #MID138B
MID AMERICA Guide nut - aluminum pin drive, black - #MID138B
Fits with #MID138
-
PARMA .050" (4/40) ALLEN WRENCH, W/OUT HANDLE - #558S
Standard allen wrench for wheel screws, etc.
-
KOLHOZA TIRE TRUER STANDART - KZA006
Includes 3/32 " & 2 mm axles and reserve rubber transmission belt
-
ATTAN Pit box, red
ATTAN Pit box, red
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
Old catalog #JK8051
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
OLEG Body Production1/24 AUDI RS5 DTM thin .005” (0.125 mm), with paint mask - #0121T
Production 1/24 Audi body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
- with paint mask
-
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK, for Phillips-head screwdriver, 1 pc. - #25196
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK HEAD, for Phillips-head screwdriver, 1 pc. - #25196
-
RALPH THORNE Clear Body 1/24 GTP Renegade, Lexan .007" (0.175 mm) - #RENEGADE007
RALPH THORNE Clear Body 1/24 GTP Renegade, Lexan .007" (0.175 mm) - #RENEGADE007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
DUBICK 2024 ES 1/32 Eurosport Chassis Assembled w/out ballbearings - #ES32
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
ZHB Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.
Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.
-
JK Donut wizard mounting tool - #L19
JK Donut wizard mounting tool - #L19
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axleOld catalog #JK8075
-
ZHB Organiser 145×232×23 mm, green, w/transparent cover, plastic
These round polyethylene plastic snap lid containers with foam are though and strong. They are great for protection cans and setups when mailing them for service.
-
BOLID GM FORD AEROMAX BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks
GM 1/24 FORD AEROMAX Body
- Made from: Polyvinyl chloride (PVC)
- For: GM (Truck)
- Thickness: .015" (0.4 mm)
- w/interior &
- w/paint masks
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .007" (0.175 mm) - #VIKING007
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .007" (0.175 mm) - #VIKING007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .010" (0.254 mm)
- Clear body
-
CAMEN AIR/CONTROL KIT , THICKNESS .004" (0,1 mm), FULL SKIRT - #CMN5900.044
Air Control Kit including .014" Diaplane, .004" Skirted Side Dams and .004" Rear Spoiler
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
H&R Jack Rabbit motor 14,000 rpm - #MJR1
H&R Jack Rabbit motor 14,000 rpm - #MJR1
Mabuchi Replacement Type - Double ended Plain 2mm shaft
-
ATTAN Pit box, pink
ATTAN Pit box, pink
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
MID AMERICA Eagle retro motor - #MID606
MID AMERICA Eagle retro motor - #MID606
-
SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012
SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012
-
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20