Все товары
-
KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281
Self centering ultra light aluminum alloy spring cups for Koford set ups
-
MS-SLOTPARTS Gauge for cutting the braids
MS-SLOTPARTS Gauge for cutting the braids
Through the set dimension, cutting is always precisely at the same length. Unequal or cropped braids belong to the past.
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154
ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag -
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
Old catalog #JK55012
-
RED FOX C-can setup - #RFC0002
RED FOX C-can setup - #RFC0002
Only setup, without endbell, magnets, hardware & ball bearings.
-
KOLHOZA TIRE TRUER NEW - KZA0061
Updated configuration!
-
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
Specifications
★Length:438mm, Width: 190mm, Height: 207mm ★Wheelbase: 257mm ★Tire Width/Diameter: 28/70mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) -
ATTAN Rim drilling tool (2 mm axle) - #ATTRDT 2 mm
ATTAN Rim drilling tool (2 mm axle) - #ATTRDT 2 mm
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
MID AMERICA 456 Braid, (sizes: 4.4 mm x 0.9 mm), pair - #MID405-1
MID AMERICA 456 Braid, pair - #MID405
Sizes: 4.4 mm x 0.9 mm (.173" x .035")
Heavy duty thick braid .with 456 strands of wire
-
DUBICK SEVEN-DIODES controller w/alligator clips - #727-7AC
DUBICK SEVEN-DIODES controller w/alligator clips
Variable brake for all motors up to 12 groups (Johnson, Hawk group, 16 & 12 group motors).
-
MAGNEHONE Hood tool - #MNH5000
MAGNEHONE Hood tool
Diamond coated hood tool, for brush hoods
-
MID AMERICA 456 Braid, (sizes: 4.4 mm x 0.9 mm), 30 pr. - #MID405
MID AMERICA 456 Braid, 30 pr. - #MID405
Sizes: 4.4 mm x 0.9 mm (.173" x .035")
Heavy duty thick braid .with 456 strands of wire
-
RED FOX Braid thin & wide, silver plated, 1 pair - #RFBRAIDW
RED FOX Braid thin & wide, silver plated, 1 pair - #RFBRAIDW
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø9.5 mm, ultra light - #BSV209,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV209,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 9.5 mm;
- W/offset of the hub;
- Ultra light.
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
-
Ralph Thorne Racing Stay clean flux pen
Ralph Thorne Racing Stay clean flux pen
New Stay-Clean Flux Pen
-
LUCKY BOB ACID FLUX W/BRUSH (45 ml) - #1200
ACID FLUX - IN A BOTTLE WITH A BRUSH
-
OLEG Clear Body Formula 1/24 McLaren MCL 35 2020, Lexan .007" (0.175 mm) - #0141
Clear Body Formula 1/24 McLaren MCL 35 2020
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
OLEG Clear Body Formula 1/24 Alpine A522 2022, Lexan .005" (0.125 mm) - #0146T
Clear Body Formula 1/24 Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .005" (0.125 mm)
- Clear body