Все товары
-
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" 1 pc - #C40
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" - #C40B
Old catalog #JK250115
-
SLICK7 1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair - #SL7-244
1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair
-
PARMA 1/8" X 1/4" FLANGED OILITES,1 pair - #623А
Use for adding 1/8" diameter axle to slot car chassis with 1/4" hole. Raised Speed Ring reduces friction for increase in speed. (Requires one pair per axle.)
-
SLICK7 3/16" X 1/4" (4.76 X 6.15 MM) REDUCER BUSHING, pair - #SL7-142
REDUCER BUSHING MOUNTS 3/32 BEARINGS ON 1/8
-
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
1/32 Center Section replacement for X32 Chassis JKP 1/32 CHEETAH 11 CHASSIS for PRODUCTION 1/32 - #JKPHC1132 & JKP 1/32 CHEETAH.11 CHASSSIS KIT W/1PAN for PRODUCTION 1/32- #JKPX32
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
Old catalog #HC1132P
-
ZHB ISRA-CLASSES RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $300 to $500 and more.... Depending on the configuration. Those. It can be chassis DUBICK, HORKY or CASTRICONE, And motors: setups: ZHB, VALIKO, VOKI, CAHOZA, HORKY or Machkoza, with different armatures.
Delivery of any configurations is possible !!! The average price of the model is indicated.
-
DIFALCO HD30 1/24 UPGRADE KIT - #DIF261
HD30 Upgrade PCB: Convert your 10 or 15 band Pro Plus or Fanatic controller to our new 30 band high definition design. You get the HD30 circuit board with a standard 148 ohm network board installed. Simply unsolder a few wires and remove the old PCB. Transfer the original brake and sensitivity rheostats over to the new HD30 board. Now bolt the PCB to the frame and solder a few wires to their correct positions. Simple instructions included.
-
DIFALCO TURBO BLAST BASIC. KIT - #DIF704
40 amp (70 amp surge) high power relay installs easily on main wires. Includes instructions for all controllers as well as special parts and instructions for Difalco Design "E"Motion electronic controllers and modules. Text plus drawings make our kit easier to install than other brands!
-
ZHB BRAKE RHEOSTAT 4,7 OHM
It is wound by plane nichrom. Used in controllers made by Nesterenko A.I. But, it can work with any electonic controller
-
DIFALCO ADJUSTABLE BRAKE RHEOSTAT W/KNOB - #DIF806
Brake Rheostat, pro, with knob, variable with off position, reducing washers.
-
DIFALCO PRO RHEOSTAT W/OFF POSITION - #DIF807
Same as the 806 but with no knob
-
DIFALCO POWER TRANSISTOR - #DIF830
Power Transistor, large silver transistor used on all "E"Motion electronic controllers and modules
-
DIFALCO SENSITIVITY RHEOSTAT FOR 1/24 - #DIF840
Sensitivity rheostat replacement for all Difalco controllers
-
ZHB "Banana" connector for controller, 1 pc.
"Banana" connector for controller, 1 pc.
-
KOFORD Alligator clips, 1 set - #M176
KOFORD Alligator clips, 1 set - #M176
Solid copper alligator clips
-
KOFORD Controller boots, 1 set - #M748
KOFORD Controller boots, 1 set - #M748
Red, White and Black allligator boots
-
PARMA Turbo Controller - 4 OHM - #264
PARMA Controllers have been the standard in performance since 1968. Their simplicity and durability means many years of dependable service. Resistors can be swapped easily to tailor your handling for different tracks and cars. Use for all 16D, Group 7, Group 12, Group 27 class racing. Turbo - Our most popular performance controller. Features an anodized Turbo Frame, double barrel resistor and 2 additional contact pads to ensure full brake and full power. Features clear handle, nylon trigger with oilites and 14 gauge wire, includes boots/clips.
-
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
All the features of the DD270 with our traction control rheostat added. The traction rheostat reduces the amount of power available on the upper wiper bands to reduce sliding out and deslotting on the exit of turns. Extremely useful for scale cars as well as NASCAR type racing.
-
S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm - #SK0107
S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm
-
S&K CONTROLLER CHIP (RESISTANCE UNDER THE ORDER)
Controller chip for S&K ELECTRONIC CONTROLLER
Contact us for choose necessary resistance
Available for order (Om):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170