Все товары
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .010" (0.254 mm)
- Clear body
-
CAMEN AIR/CONTROL KIT , THICKNESS .004" (0,1 mm), FULL SKIRT - #CMN5900.044
Air Control Kit including .014" Diaplane, .004" Skirted Side Dams and .004" Rear Spoiler
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
H&R Jack Rabbit motor 14,000 rpm - #MJR1
H&R Jack Rabbit motor 14,000 rpm - #MJR1
Mabuchi Replacement Type - Double ended Plain 2mm shaft
-
ATTAN Pit box, pink
ATTAN Pit box, pink
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
MID AMERICA Eagle retro motor - #MID606
MID AMERICA Eagle retro motor - #MID606
-
SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012
SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012
-
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
-
BSV Crown gear 48 pitch 26T, 3/32" axle, Ø16.7 mm - #BSV0726
BSV Crown gear 48 pitch 26T, 3/32" axle, Ø16.7 mm - #BSV0726
-
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc. - #412
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc.
-
NeAn GM SCANIA BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #80-P
GM 1/24 SCANIA Body
- Made from: Polyvinyl chloride (PVC)
- For: GM (Truck)
- Thickness: .015" (0.4 mm)
- w/interior &
- w/paint masks
-
KOFORD Ø2 mm AXLE, selection (length 55 mm) - #M639
2mm ultraprecision premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground. One per package
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair
Good grip donuts for club races.
Better alternative for Pirania Light and Super Natural.
-
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
1 pair of green treated tires for Production 1/32 or other classes
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
Fit for 11 mm rims
Tiny pores, very firm, super sticky
-
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
-
CAHOZA CUT DOWN GRAPHITE GUIDE, non thread - #28
CUT DOWN GRAPHITE NYLON GUIDE
cut down guide for integral guide tongue chassis, content: black nylon, glass fibre, graphite -
ALPHA Rear wheel donuts GREEN, pair - #GREEN
ALPHA Rear wheel donuts GREEN, pair - #GREEN
1 pair of green tires for Production 1/32 or other classes
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540
FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR - #540
This rims is made for pressing on the axle!
PARAMETERS
- dia., mm: 14
- width for gluing tires, mm: 5,5
- total width, mm: 12
- dia. of holes for set on axle Ø2 mm., mm : 1,8
-
KOFORD MEDIUM TIRE TRACTION, bottle - #M320
Medium tire traction. Ideal for G15 C12 and lower class cars which require a lighter glue