Все товары
-
OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .007” (0.175 mm) - #OLG0118
Eurosport 1/24 Audi R15 LMP DTI body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0,175 mm)
-
KOLHOZA Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body, Lexan thin .005” (0.125 mm), with paint mask - #0118T
Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0,125 mm);
- Clear body, with paint mask.
-
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019, Lexan .007" (0.175 mm), with paint mask - #0131
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
MS-SLOTPARTS Static balancer tool for balancing the hubs and gears of slot cars. Includes 3/32 " & 2 mm axles and storage box.
Static balancer tool for balancing the hubs and gears of slot cars.
Includes 3/32 " & 2 mm axles and storage box.
-
HENKEL Super glue Moment Maxi, tube 20 g.
Super Moment Maxi perfectly glues a wide range of materials. It is a fast, reliable and durable transparent all-purpose instant adhesive in a large package.
Benefits:
Universal
Water resistant
Heat-resistant (from -40С to + 70С)
Transparent
Large volume -
KOFORD EPOXY HIGH TEMP MAGNET ADHESIVE, one-component - #M345
High temperature epoxy magnet adhesive. Single component advanced structural adhesive especially formulated for gluing slot car magnets. Has superior impact strength and high temperature capabilities compared to commonly available magnet adhesives. Oven cure.
-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
PARMA CLEAR LEXAN CONTROLLER HANDLE - #360
Replacement controller handle for all PARMA Controllers. Direct fit for Economy and Sebring controllers. Can be used for Turbo, Plus and Turbo Qualifier with modifications (top must be cut as original handle).
-
-
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
-
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
Fit for S&K tire truer.
-
KOFORD Ø4/40" SCREW IN RIMS & GEARS, PERFORATED, 12 pcs. - #621
Gold billet machined hollow set screws (not rolled like standard set screws). Increased tightening cycles over standard set screws. (bag of 12)
-
ALPHA CUP POINT SCREWS Ø4/40" (Through-hole) IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #885
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
-
CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339
CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339
Upgraded version of long cut down guide (#336) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used
-
TAMIYA Masking tape, width 10 mm - #TAM87031
TAMIYA Masking tape, width 10 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TAMIYA Masking tape for curves, width 12 mm - #TAM87184
TAMIYA Masking tape for curves, width 12 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape refill, width 18 mm - #87035
TAMIYA Masking tape refill, width 18 mm - #87035
-
TAMIYA Masking tape, width 40 mm - #87063
TAMIYA Masking tape, width 40 mm - #87063
Tamiya Masking Tape is thin, very strong adhesive tape for modelling use.
-
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
Perfect for #MID138B, #MID138R
-
GRW 2 х 5 х 2,3 mm flanged shielded ballbearings, 7 balls, pair - #SSF682-ZZ
2 х 5 х 2,3 mm flanged shielded ballbearings, 7 balls, pair
High quality, german flanged ballbearings
-
KV Upgrade kit for KV tire truer - diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV5
KV upgrade kit for tire truer with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining
-
CAHOZA LIGHT PROFILE ENDBELLS - #257
New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams
-
ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382
ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382
-
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led
Suitable for ES 1/32