Все товары
-
KOFORD LIGHT TIRE TRACTION, bottle - #M384
Light tire traction
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
TWP Rear jig wheels - #TWPALN-001
TWP Rear jig wheels - #TWPALN-001
Rear Jig Wheels use to set axle height Inox steel One tool with four sizes 36T, 37T , 38T and 39 T size gears. WITH AXLE INCLUDED
-
-
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
-
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
This gauge is used to accurately measure the timing of slot car motor armatures.
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
-
DUBICK gold plated long guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair - #DB702
DUBICK gold plated long guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair
-
KOFORD 3/32" (2.36 MM) .010 (0.26 MM) THICK PHOS BRONZE AXLE SPACER, 12 psc. - #M296
.010 thick 3/32 Phos Bronze axle spacers. Very hard but will not stick to magnets. 12 per bag.
-
MID AMERICA 3/32" (2.36 mm), .010" (0.254 mm) thick, bronze axle spacers, 8 pcs. - #MID505
MID AMERICA 3/32" (2.36 mm), .010" (0.254 mm) thick, bronze axle spacers, 8 pcs. - #MID505
-
BSV CROWN GEAR 72 pitch, 30 teeth, 2 mm axle, black - #BSVF72302
BSV CROWN GEAR 72 pitch, 30 teeth, 2 mm axle, black - #BSVF72302
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
TWP EDM rear axle alignment tool - #TWP521
TWP EDM rear axle alignment tool - #TWP521
New Rear axle alignment with 9 height options. Cut to erosion with CNC wire. Extremely precise with 0.005 mm tolerance. For gears between 32 teeth up to 40 teeth with holes for 3/32 shafts. The 90 mm long shaft is not included.
-
MID AMERICA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #MID550
MID AMERICA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #MID550
-
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
Solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
Old catalog #JK5501
-
CAHOZA Ø3/32" (2.36 mm) AXLE (length 53.1 mm) - #23
SOLID AXLE 3/32
solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing -
PROSLOT X-7 B PRO motor brushes, 50 prs. - #PS-X7B
PROSLOT X-7 B PRO motor brushes, 1 pr. - #PS-X7B
1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
KOFORD Drag glue regular, bottle - #M452
KOFORD Drag glue regular - #M452
Drag Glue. Blow away the competition! Tests show our glue results in better ET’s than existing technology!
-
OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .005” (0.125 mm) - #OLG0118T
Eurosport 1/24 Audi R15 LMP DTI body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0,125 mm)
-
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair - #DB703
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair
-
OLEG Clear Body Retro 1/24 Buick Riviera 1969 4,5", Lexan .015" (0.381 mm) - #0132
Clear Body Retro 1/24 Buick Riviera 1969 4,5"
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Brabham BT26 1969, Lexan .010" (0.254 mm) - #0133
Clear Body Retro Formula 1/24 Brabham BT26 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 AAR Indy Eagle 1968, Lexan .010" (0.254 mm) - #0134
Clear Body Retro Formula 1/24 AAR Indy Eagle 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body