Все товары
-
TAMIYA Masking tape, width 6 mm - #TAM87030
TAMIYA Masking tape, width 6 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TQ Lead wire 20Ga (section 0,52 mm²), black 1 m (3 ft) - #TQ2031
TQ Lead wire 20Ga (section 0,52 mm²), black 1 m (3 ft) - #TQ2031
266 strand bare copper conductor with thin silicone insulation. 1.75mm OD available in Black only. Not the lightest leadwire available but has approx. 75% more copper in the conductor to deliver more current and less loss
-
MID AMERICA Eagle motor - #MID605
MID AMERICA Eagle motor
-
KOLHOZA SOLDER REGULATION 110V - KZA#0081
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 110 volt
-
RALPH THORNE Flux Brush, 1 pc. - #RTRFB-1
RALPH THORNE Flux Brush, 1 pc.
1 disposable flux brush with adjustable length handles.
-
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335
long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, very precise, high quality material used
-
BPA Clear Body Eurosport 1/24 BMW LMR, Lexan .005" (0.125 mm), with paint mask - #K 021-005
BPA Clear Body Eurosport 1/24 BMW LMR
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
Old catalog #JK80421
-
REDFOX Clear body F1 JRL Hallo Ferrari Formula 1/24, Lexan, thin .007" (0.175mm) - #RFSC105C
REDFOX Clear body F1 JRL Hallo Ferrari Formula 1/24
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
TQ LEAD WIRE 20Ga (section 0,52 mm²), black, 3 m (10 ft) - #TQ201
10 feets of 20 gauge Black wire
-
MID AMERICA Mockingbird motor - #MID604
MID AMERICA Mockingbird motor
-
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
EDM pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears
-
DUBICK Holder for the armatures & armatures in the tubes
DUBICK Holder for the armatures & armatures in the tubes
-
SLICK7 LEAD WIRE 20Ga (section 0,52 mm²), yellow, 35 cm - #S7-213 - 35
GOLDEN SILICON WIRE 35 cm
-
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
Old catalog #JK3516
-
JK CONTROLLER TRIGGER - #N9
JK CONTROLLER TRIGGER - #N9
Controller trigger, Updated
Old catalog #JK8083
-
DUBICK Traditional flat controller trigger - #726
DUBICK Traditional flat controller trigger - #DB726
Same as Parma finger trigger profile. Suitable for Parma, DiFalco or JK controllers. Has an additional brass tube for spring-loaded moving contact.
-
RED FOX High performance 408 strand braid, (sizes: 5.1 mm x 0.9 mm), 1 pair. - #RFBRAIDHP1
RED FOX High performance 408 strand braid, 1 pair. - #RFBRAIDHP1
sizes: 5.1 mm x 0.9 mm (.200" x .035")
High Performacne 408 strand dimpled braid
-
MID-AMERICA DIAMOND HEAD SET UP KIT W/ BUSHINGS & MAGNETS - #MAR630
Diamond Head C can set up Kit w/ Bushings C Can Set Up Very High Quality Set up kit with Magnets and brush springs
-
KOLHOZA CAR BALANCER - KZA007
With this car balancer you can get your car balanced to perfection. With a front and two rear scales you can adjust your chassis front to back or right to left.
-
DUBICK 4/40" x 1/8" set screws, tube (50 pcs.) - #DB401
DUBICK 4/40" x 1/8" set screws, tube (50 pcs.) - #DB401
Tire and gear size.
-
MID AMERICA Phoenix motor - #MID602
MID AMERICA Phoenix motor
A Hawk size motor with group 12 speed.
-
DUBICK Tweezers stainless steel, non-magnetic - #DB715
DUBICK Tweezers stainless steel, non-magnetic - #DB715
Perfect for work with small parts!
-
ZHB Organizer universal 280 х 190 х 30 mm (11.02" x 7.48" x 1.18"), with 40 configurable compartments, grey, w/transparent cover, plastic
ZHB Organizer universal
- Material: plastic with transparent cover.
- Dimension, mm (in.): 280 х 190 х 30 mm (11.02" x 7.48" x 1.18").
- Quantity of configurable sections, pcs.: 40.
- Dimension of section, mm (in.): 33 x 33 (1.29" x 1.29").
- Conveniently customizable sections specifically for your needs!
- Secure locks prevent unwanted opening of the organizer.