Все товары
-
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
-
-
KOFORD BRUSH RADIUS TOOL, Ø5.2 mm - #M270
Brush radius tool for fast break in. The essential tool for maximum motor performance. Now hardened for long life and with improved knurl
-
DenVel electonics Stand for magnets tests - #MT1
Stand for magnets tests. Indispensable in the selection of magnets.
Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE
-
DenVel electonics Stand for magnets tests, w/external sensor, v.2 - #MT v2
Magnet tester #MT v2 - a device for measuring the magnetic field strength of magnets.
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013
Speed Fx Motor springs - Double Overhead
-
JK Motor springs M3 & M6 (L&R), 2 coils - #M36G
JK Motor springs M3 & M6 (L&R), 2 coils - #M36G
Old catalog #JK303066
-
DIFALCO Clear Controller Handle with Hardware - #DD850
DIFALCO Clear Controller Handle with Hardware
-
DIFALCO Silver Metallic controller handle w/hardware - #DD851
Silver Metallic Lexan controller handle with hardware
-
DIFALCO Gray Metallic controller handle w/hardware - #DD852
Gray Metallic Lexan controller handle with hardware
-
PARMA LOW PROFILE BLADE GRAPHITE GUIDE CUT DOWN - #70223
The Cut Down Blade was designed for high end racing for maximum ride height adjustability. It will lower the front of chassis .030". Material is milled from top of guide around bottom of post. Use with #70235 Spacers to adjust ride height from .010" to .020" if needed.
-
BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435
BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
Old catalog #JK42351
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø9.5 mm, ultra light(1,32 gr/pair)
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,32
ON PHOTO RIMS WIDTH 20 MM!!
-
CAHOZA Horizontal motor brushes, pair - #351
CAHOZA Horizontal motor brushes, pair - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
CAHOZA Horizontal motor brushes, 10 pairs - #351
CAHOZA Horizontal motor brushes, 10 pairs - #351
The development of these motor brushes took 3 years and it was done with 2KK cooperation. Cahoza performed testing and comes to the conclusion that these are the good ones.
-
SONIC Replacement tire wrench tip .050", straight - #51-50TR
SONIC Replacement tire wrench tip .050", straight - #51-50TR
Fits most wrench handles. .050" tip fits Euro-Style wheels.
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019, Lexan .007" (0.175 mm) - #0141B
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019 - #0141B
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body (painted without stickers)
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
Old catalog #JK4235F
-
S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564
S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564
-
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,