Все товары
-
"Wide one", outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
KLINGON Donuts, inside Ø mm, outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
-
DIFALCO Midnight Black Controller Handle w/Hardware - #DD854
Black Lexan controller handle with hardware
-
DIFALCO Candy Apple Red Controller Handle w/Hardware - #DD855
Candy Apple Red Lexan controller handle with hardware
-
DIFALCO Lemon Drop Metallic controller handle w/hardware - #DD856
DIFALCO Lemon Drop Metallic controller handle w/hardware - #DD856
-
DIFALCO Sky Blue Metallic Controller Handle w/Hardware - #DD857
Sky Blue Metallic Lexan controller handle with hardware
-
DIFALCO Key Lime Pie Metallic controller handle w/hardware - #DD858
DIFALCO Key Lime Pie Metallic controller handle w/hardware - #DD858
-
DIFALCO Sage Green Metallic controller handle w/hardware - #DD859
Sage Green Metallic controller handle w/hardware - #DD859
-
PARMA Turbo Controller Trigger Pin- #355BS
Replacement Turbo Trigger Pin and Screw/Nut.
-
DIFALCO Ballbearing kit w/trigger pin - #DD721
DIFALCO Ballbearing kit w/trigger pin
Ball Bearing Upgrade Kit w/ DD719 Trigger Pin - This kit adds our DD719 trigger pin to the above kit. This upgrade kit is for all brand controllers and our modules who want to upgrade to a ball bearing trigger. This is for Parma,3rd Eye,Ruddock,JG and any brand!
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 36.98MM DIA. - KZA0062 - KZA0063
Reserve rubber transmission belt for TIRE TRUER KZA006 (KZA0061) & HUDY 36.98MM DIA.
-
KOLHOZA AXLE FOR TIRE TRUERS KZA006 (61) & HUDY 2 MM - KZA0064
Reserve axle 2 mm for TIRE TRUER KZA006 (KZA0061) & HUDY
-
MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417
MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417
-
MID AMERICA Replacement tire wrench tip .050", straight, dia. 2 mm - #426JK
MID AMERICA Replacement tire wrench tip .050", straight, dia. 2 mm
Fits for JK, Red Fox, Koford
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.
-
CAHOZA С-Can G12 motor - O - #230
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,2 grammes.
-
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
REDFOX FORMULA 1/24 BODY, Lexan, thin .007" (0.175mm) - RFSC29C
Formula 1/24 Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175mm)
-
NeAn Clear "TEAPOT" 1/24 FERRARI 550 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #13-P
"TEAPOT" 1/24 Ferrari 550 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 NOBLE M12 GTO BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #14-L
"TEAPOT" 1/24 Noble M12 GTO Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 NOBLE M12 GTO BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #14-P
"TEAPOT" 1/24 Noble M12 GTO Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 ASTON MARTIN DBR 9 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #15-L
"TEAPOT" 1/24 Aston Martin DBR 9 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask