Все товары

• 

  SCB High quality braids TOP-Q (sizes: 4,0 x 0,35 mm х 26 mm), 5 pair - #TQCU01090

  SCB High quaility braids TOP-Q (made in Germany) (NEW!)

  • Sizes: 4,0 x 0,35 mm х 26 mm,
  • 5 pair. 

  Good braids for all classes.

  13.68 $

• 

  SCB braids ULTRA SOFT (sizes: 4,95 mm x 0,75 mm x 30 mm), 5 pair - #USCU01220

  SCB braids ULTRA SOFT, (made in Germany)

  • Sizes: 4,95 mm x 0,75 mm x 30 mm,
  • 5 pair. 
  • Ultra soft braids for all classes.

  14.74 $

• 

  SCB braids SUPER THIN LONG (sizes: 4,50 x 0,50 mm х 32 mm), 5 pair - #STCU01150/L

  13.68 $

• 

  SCB High quality braids SUPER THIN soft (sizes: 3,9 x 0,55 mm х 30 mm), 5 pair - #STSCU01150

  SCB High quaility braids SUPER THIN soft (made in Germany)

  • Sizes: 3,9 x 0,55 mm х 30 mm,
  • 5 pair. 

  Good braids for all classes.

  13.00 $

• 

  SCB High quality braids SUPER SUPER BIG (sizes: 5,2 x 0,8 mm х 25 mm), 5 pair - #SBCU01295

  SCB High quaility braids SUPER SUPER BIG (made in Germany) (NEW!)

  • Sizes: 5,2 x 0,8 mm х 25 mm,
  • 5 pair. 

  Good braids for all classes.

  13.00 $

• 

  KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444

  Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks

  5.98 $

• 

  OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, Lexan .01" (0.25 mm), with paint mask - #01455T

  OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers

  • Made from: Polycarbonate (Lexan)
  • For: Production 1/24
  • Thickness: .01" (0.25 mm)
  • Clear body, with paint mask

  7.00 $

• 

  VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515

  VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515

  33.68 $

• 

  Cahoza black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  34.00 $

• 

  Cahoza black covered pinion 72 pitch 6 teeth, 0° angle 1.5 mm bore - #14

  34.00 $

• 

  Cahoza black covered pinion 72 pitch 6 teeth, 0° angle 1.2 mm bore - #14A

  34.00 $

• 

  KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated - #M542

  KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated  - #M542

  8 T Black Diamond coated pinion with boss for greater solder surface area for use with G7. Coating reduces friction and prevents solder from flowing into teeth. Use against plastic spurs only

  9.10 $

• 

  RedFox Cutdown Nylon Guide Flag, unthreaded, Low Profile. This in effect lengthens the chassis. - #RFBAGH

  RFBAGH - This is Red fox's new Guide flag. It is a new design in that the post is further back. This in effect lengthens the chassis resulting in better handling and better lap times (especially Retro). 

  5.50 $

• 

  RedFox Cutdown GRAPHITE Guide Flag, unthreaded, Low Profile. This in effect lengthens the chassis. - #RFBAGHG

  This is the same high performance guide as RFBAGH but in Graphite

  5.50 $

• 

  ARP PINION 72 PITCH, 6T, 0° angle, 1.5 mm bore (FOR F1/32) - ARP#7206-1,5 mm

  1.5 mm shaft - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness

  The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

  
  

  7.96 $

• 

  CAHOZA Highly durable gear corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5-BC-2

  CAHOZA Highly durable gear corrected 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5-BC-2

  6.40 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle - #BSV72392

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle - #BSV72392

  3.70 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72392led

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing  - #BSV72392led

  Suitable for ES 1/32

  3.70 $

• 

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72392longled

  BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing  - #BSV72392longled

  Suitable for ES 1/24

  3.70 $

• 

  S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

  S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722

  4.16 $

• 

  ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

  ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392

  5.26 $

• 

  CAHOZA 9MM GUIDE NUTS - #31-1

  GUIDE NUTS 9MM
  aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag

  2.00 $

• 

  CAHOZA 9MM GUIDE NUTS, 10 pc - #31

  GUIDE NUTS 9MM
  aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag

  16.80 $

• 

  S&K 0- 17V, 12A Power Supply. 110v or 220v. Weight 340 gr./ 0.75 lb. Dimensions: 110 x 90 x 48 mm - #SK0108

  New ultra small power supply!

  PARAMETERS

  • Type: DC
  • Input voltage, V: 110 or 220
  • Adjustable voltage, V: 0-17
  • Weight, gr: 340
  • Dimensions, mm: 110x90x48
  • Displays voltage & current

  336.84 $