Все товары
-
S&K 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6 mm glued on 3/32" axle ProSlot - ZHB#214
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.02 mm - #SK3964
S&K GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.02 mm - #SK3964
-
CAHOZA Brass guide clips short, pair - #333
CAHOZA Brass guide clips short, pair - #333
NEW!!!
These clips perfectly fit new long guide, manufactured from tough brass plate, thickness 0,25mm (.01"), lead wires are soldered through windows in guide
-
DUBICK 2 mm, .04" (1 mm) thick aluminium axle spacer, 1 pc. - #713-1
DUBICK 2 mm, .04" (1 mm) thick aluminium axle spacer, 1 pc. - #713-1
-
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
-
BSV CROWN GEAR 72 pitch, 33 teeth, 3/32" axle, black - #BSVF7233
BSV CROWN GEAR 72 pitch, 33 teeth, 3/32" axle, black - #BSVF7233
-
CAHOZA BRASS GUIDE CLIPS SHORT, pair - #29
guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered through windows in guide
-
JK Ø1/8" (3.15 mm) axle, length 2.175" (55 mm) - #A4
JK Ø1/8" (3.15 mm) axle, length 2.175" (50,8 mm) - #A4
1/8" x 2.175" Precision Ground True Drill Blank Axle, High Hardnes
Old catalog #JK5511
-
JK Ø1/8" (3.15 mm) axle, length 2.175" (55 mm), 6 pcs. - #A4-6
JK Ø1/8" (3.15 mm) axle, length 2.175" (50,8 mm), 6 pcs. - #A4-6
1/8" x 2.175" Precision Ground True Drill Blank Axle, High Hardnes
Old catalog #JK5511
-
KELLY Racing Tires STAN'S OIL
KELLY Racing Tires STAN'S OIL
-
SRT Ø1/8" (3.15 mm) drill blank axle, length 2.75" (69.85 mm) - #SRT10000
SRT Ø1/8" (3.15 mm) drill blank axle, length 2.75" (69.85 mm).
Heavy duty drill blank axle is a replacement for Womps and Flexi Cars. Can be used for most slot cars that require an 1/8" axle that is 2.75" long.
-
LOCTITE THREADLOCK LOCTITE 243 for fixing motor screws, 5 ml - #31415
Allows not to worry about the loss of the motor screws in the race.
Medium Strength:
It is possible to dismantle with a conventional hand tool, but with great effort. It is used in threaded joints of machine tools, presses, pumps and compressors, gearboxes. The permitted thread size is up to M8 -
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .007" (0.175 mm), size 50x180 mm - #DB2071
Lexan for body reinforcement
Parameters
- Thickness: .007" (0.175 mm)
- Size: 50x180 mm
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .010" (0.25 mm), size 50x180 mm - #DB2072
Lexan for body reinforcement
Parameters
- Thickness: .010" (0.25 mm)
- Size: 50x180 mm
-
ZHB REINFORCED TAPE (w/linear reinforcement), 12 mm x 50 m - #922
A great option for the beginning racers!
-
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), blue, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), blue, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
-
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
-
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), black, 1 m (3 ft.), insulation diameter .12" (3,08 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), black, 1 m (3 ft.), insulation diameter .12" (3,08 mm)
-
CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266
ALUMINIUM NICKEL PLATED BRUSH HOODS
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise -
KOLHOZA Stand for installation body on Production 1/32 JK "Cheetan 11" chassis - #KZA034
KOLHOZA Stand for installation body on Production 1/32 JK "Cheetan 11" chassis - #KZA034
-
WRIGHTWAY Plastic custom motor case with foam insert for 14 C/D-group motors - #WW18
WRIGHTWAY Plastic custom motor case with foam insert for 14 C/D-group motors - #WW18
Plastic Custom Motor Case with foam insert that has cutouts for 14 C and D size can motors.
-
KOLHOZA Body installation stand for JK Cheetah 21 chassis - #KZA035
KOLHOZA Body installation stand for JK Cheetah 21 chassis