Все товары
-
KOLHOZA PIT BOX - KZA004
Pit Caddy for holding tires, traction, tools etc
-
B52 Clear body Production 1/24 Ferrari FXX, Lexan .007" (0.175 mm) - #B52PP517
Clear body Production 1/24 Ferrari FXX
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
KOFORD HEAVY TIRE TRACTION, bottle - #M319
Heavy tire traction. The choice of the Pro's.
-
MID-AMERICA Guide nut socket driver (metric nuts) - #MID129M
MID-AMERICA Guide nut socket driver (metric nuts) - #MID129M
-
EAGLE standart profile unthreaded black jet guide - #EDPGUIDE
EAGLE Low profile unthreaded black jet guide - #EDPGUIDE
-
KOFORD ALIGNMENT BAR W/HOLES - #M148
Alignment bar with holes, provided with centering holes for both vertical and horizontal style brush hoods. The essential tool for motor assembly, used by motor builders world wide
-
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo (ISRA 2024), lexan, thickness .005" (0.125 mm), w/paint masks and stickers - #DP25409-5
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo LEGAL FOR ISRA 2024
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Width: 81.15 mm (3.189")
- Clear body, with paint mask and stickers!
-
DenVel Electronics Innovative controller EVO-2
Innovative controller EVO-2 from DenVel Electronics, new design
Innovative controller EVO-2 by DenVel electronics.
A lot of abslutly new moments below about few much important- controller is regulator electric current
- 128 bands (speeds) - it make it really stable, soft and fast on corners
- wire chock 25 position
- Traction-control, By-pass,
- Works with brushless motors,
- Three type of brakes
- Dual Brake function - facilitates control in bundles of turns
- 6 cells of non-volatile memory by classes
- Possibility to chose comfortable place for trigger
- Adjustable trigger angle
-
DoSlot 2000kv motor 2 mm shaft
DoSlot 2000kv motor 2 mm shaft
-
DoSlot 3000kv motor 2 mm shaft
DoSlot 3000kv motor 2 mm shaft
-
DoSlot 4000kv motor 2 mm shaft
DoSlot 4000kv motor 2 mm shaft
-
DoSlot 6000kv motor 2 mm shaft
DoSlot 6000kv motor 2 mm shaft
-
MOSSETTI Patriot "Revolver" chassis - flat track version - for brushless - #MR4002
MOSSETTI Patriot "Revolver" chassis - flat track version - for brushless - #MR4002
With outboard shaft bearing support included
-
DoSlot 11000kv motor 2 mm shaft
DoSlot 11000kv motor 2 mm shaft
-
DoSlot E-Com chip "Red" with cable and plug
DoSlot E-Com chip "Red" with cable and plug
DoSlot E-Com "Standard" - Red
- Best all-rounders
- Slowest version with the same voltage and motor
- Can have a really little delayed full throttle start-up with higher KV engines
- Maximum speed 9000KV at 14V
-
NSR Brushless ECOM V1 for brushless motors - #3061
NSR Brushless ECOM V1 for brushless motors - #3061
The NSR ESC is specially developed to control extreme motors like the NSR ones.
-
DoSlot 9000kv motor 2 mm shaft
DoSlot 9000kv motor 2 mm shaft
-
DoSlot 17500kv motor 1,5 mm shaft
DoSlot 17500kv motor 1,5 mm shaft
-
DoSlot 21500kv motor 1,5 mm shaft
DoSlot 21500kv motor 1,5 mm shaft
-
DoSlot E-Com chip "Yellow". Good for all 6 segment magnets motors.
DoSlot E-Com chip "Yellow". Good for all 6 segment magnets motors.
-
JK Clear body 4" Audi RSC 99, Lexan .005" (0,125 mm) - #B86X
JK Clear body 4" Audi RSC 99 - #B86X
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .005" (0.125 mm)
- Clear body
Old catalog #JK7182
-
RALPH THORNE Clear Body 1/24 High down force ORCA, Lexan .007" (0.175 mm) - #ORCAHD007
RALPH THORNE Clear Body 1/24 High down force ORCA
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 4" Evolution dirt late modified, Lexan .007" (0.175 mm) - #1278A
RALPH THORNE Clear Body 4" Evolution dirt late modified, Lexan .007" (0.175 mm) - #1278A
- Made from: Polycarbonate (Lexan)
- For: 4"
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 4" Titan Stock Car, Lexan .007" (0.175 mm) - #TITAN007
RALPH THORNE Clear Body 1/24 4" Titan Stock Car
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 4" Titan COT Stock Car, Lexan .007" (0.175 mm) - #TITANCOT007
RALPH THORNE Clear Body 1/24 4" Titan COT Stock Car
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
Bigger rear wing then the Titan
-
RED FOX EUROSPORT 1/24 AUDI 2019-2025 ISRA LEGAL BODY, lexan, thickness .005" (0.125 mm) - #RFAUDIISRA19
EUROSPORT 1/24 Audi 2019-2021 ISRA LEGAL Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- ISRA legal body for 2019-2021 years
-
RED FOX Clear Body 1/24 4" Bettle Wing HD, Lexan .007" (0.175 mm) - #RFSC48C
RED FOX Clear Body 1/24 4" Bettle Wing HD
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body
-
DoSlot E-Com chip "Green" with cable and plug
DoSlot E-Com chip "Green" with cable and plug
DoSlot E-Com “Medium” Prototype - Green
- Faster than standard, but slower than “Mild-Fast” at the same voltage!
- Maximum speed same as "Standard" 9000KV at 14V
- Always perfect full throttle starting so far!
- maybe not so good for heavy model cars
-
SLICK7 Gear 48 pitch, 26T, 1/8" axle, Ø14.8 mm - #S7-525-26
SLICK7 Gear 48 pitch, 26T, 1/8" axle, Ø14.8 mm - #S7-525-26
-
KOLHOZA 1/24 Custom painted car interior, blue, thin .005" (0,125 mm) - #0126-blue
KOLHOZA 1/24 Custom painted car interior, blue, thin .005" (0,125 mm) - #0126-blue
-
KOFORD Ø.471" (11.96 mm) bearing assembly tool (for Eurosport motor) - #M523-471
KOFORD Ø.471" (11.96 mm) bearing assembly tool (for Eurosport motor) - #M523-471
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.476" (12.09 mm) bearing assembly tool (for Eurosport motor) - #M523-476
KOFORD Ø.476" (12.09 mm) bearing assembly tool (for Eurosport motor) - #M523-476
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.478" (12.14 mm) bearing assembly tool (for Eurosport motor) - #M523-478
KOFORD Ø.478" (12.14 mm) bearing assembly tool (for Eurosport motor) - #M523-478
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.479" (12.17 mm) bearing assembly tool (for Eurosport motor) - #M523-479
KOFORD Ø.479" (12.17 mm) bearing assembly tool (for Eurosport motor) - #M523-479
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.480" (12.19 mm) bearing assembly tool (for Eurosport motor) - #M523-480
KOFORD Ø.480" (12.19 mm) bearing assembly tool (for Eurosport motor) - #M523-480
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.481" (12.22 mm) bearing assembly tool (for Eurosport motor) - #M523-481
KOFORD Ø.481" (12.22 mm) bearing assembly tool (for Eurosport motor) - #M523-481
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
RED FOX Clear Body Eurosport 1/32 Audi EURO (ISRA 2023 - 2026), Lexan .005" (0.125 mm) - #RFES1/3223
RED FOX Clear Body Eurosport 1/32 Audi EURO LEGAL FOR ISRA 2023
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
RED FOX Clear body Production 1/24 Corvette DTM (ISRA 2021), lexan, thickness .005" (0.125 mm), w/paint masks - #RFISRAVETTE5
RED FOX Clear body Production 1/24 Corvette DTM LEGAL FOR ISRA 2021
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
BSV LUXURY FISH donuts inside Ø 13.7 mm (.540"), outside Ø 24.1 mm (.949"), about 19.7 mm (.748") width, pair
BSV LUXURY FISH donuts inside Ø 13.7 mm (.540"), outside Ø 24.1 mm (.949"), about 19.7 mm (.748") width, pair
-
KOFORD Ultralight qualifying wire, 1 pc. - #M383
KOFORD Ultralight qualifying wire, 1 pc. - #M383
The Nat’s TQ ultralight qualifying lead wire made from ML magnet wire. Enough for several cars.
-
JK Tire rack - #L32
JK Tire rack - #L32
Wheel stand is for holding any kind of tires.
-
PROSLOT SPEEDFX X12 BALANCED MOTOR, W/CHEAP BALANCED ARMATURE- #PS3000
Speed FX Group 12 Motor SRS C-Can - Black Endbell
Great option for the beggining racers in Production 1/24. When the work time of cheap armature came out, you can set in this can more expensive armature.
-
Novak Solder regulation / voltage converter 220-110V for Weller solder iron
Solder regulation / voltage converter 220-110V for Weller solder iron
Only for 110V Weller soldering!
-
TURNIGY LEAD WIRE 24Ga (section 0,21 mm²), yellow, 1 m
LEAD WIRE 24Ga (section 0,21 mm²), yellow, 1 m
-
PARMA 1/24 TURBO-flex Chassis - Steel - #420
PARMA steel 2 piece chassis is designed with a floating top pan for best handling and performance. A lightweight aluminum top pan is also available for more speed and faster cornering. 4" wheel base.
-
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
MID AMERICA 1/24 Champion Turbo-Flex steel chassis - #MID215
-
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo (ISRA 2024), lexan, thickness .007" (0.175 mm), w/paint masks and stickers - #DP25409-7
DELTA PLASTIC Clear body Production 1/24 Hyundai i30N turbo LEGAL FOR ISRA 2024
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Width: 81.15 mm (3.189")
- Clear body, with paint mask and stickers!
-
GENERIC USA BRAID, pair - #1300
Pair of braids for guide
-
JK STIFFER BRAID, (sizes: 0,8 x 4,8 x 27,5 mm), pair - #U11
JK STIFFER BRAID, pair - #U11
Stiffer braid for guide, pair
Sizes: 0,8 x 4,8 x 27,5 mm (.0315" x .189" x 1.083")
Old catalog #JK35212
-
JK SOFT BRAID, (sizes: 0,9 x 4,85 x 32 mm), pair - #U10
JK SOFT BRAID, pair - #U10
Soft braid for guide, pair
Sizes: 0,9 x 4,85 x 32 mm (.035" x .191" x 1.26")
Old catalog #JK3521
-
TAMIYA 1/14 R/C Buggyra Fat Fox (TT-01 Type-E) - #58661
TAMIYA 1/14 R/C Buggyra Fat Fox (TT-01 Type-E)
For more information click here: https://www.tamiya.com/english/products/58661/index.htm
-
KOFORD 408 BRAID, pair-#M661
The best choise for class Formula 1/32
-
KOLHOZA DONUT MOUNTING TOOL- KZA003
Tool for mounting tire donuts onto the rim
Comes with axes 3/32" & 2 mm
-
ATTAN Braid Cutter
Cut your braids to perfect length every time with this Braid Length Jig. Fully adjustable and beautifully made
-
NeAn Box for storage KV tire truer 4,33"x3,54"x2,75" (110x90x70 mm) - #170
NeAn Box for storage KV tire truer 4,33"x3,54"x2,75" (110x90x70 mm) - #170
Plastic box comes with the tire truers KV (KV #1, KV #4)
-
BSV LUXURY Donuts, inside Ø 10.2 mm (.400"), outside Ø 21.5 mm (.854"), about 34 mm (1.338") width, pair
BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair
Good for Production & Eurosport.
-
CHICAGOLAND RACEWAY Aluminum guide collar, 1 pc. - #CR074
CHICAGOLAND RACEWAY Aluminum guide collar, 1 pc.
SET OF SCREWS DIDN'T INCLUDED!!
For racers who don't need the lowest guide nut possible, for body clearance, these .150" tall, dual set screw, collars, don't require threading, and install almost effortlessly, with no wobble, using a standard tire wrench.
-
CAHOZA Low profile cut down nylon elastic guide, w/out thread - #26
cut down guide for integral guide tongue chassis, content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, ideal for Production chassis
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 25 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 25
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
KOLHOZA BODY CUTTING TOOL - KZA002
Professional tool for easy & smooth cutting of the body
-
ZHB MAGNETIZATION OF THE MAGNETS - #100
Magnetize possible any magnets from ferrite to samarium-cobalt
-
ZHB ORGANIZER with 12 compartments 133×78×16 mm, transparent, plastic
PARAMETERS
- Material: Transparent plastic
- Dimension, mm: 133×78×16
- Quantity of sections, pcs.: 12
-
KOFORD BIG HEAD PRO BODY PINS, 48 psc. in tube - #M376
Big head pro body pins. Ideal length for bending over on swing over front body mounts, or for use on with full width body mounts. Custom made just for us, the best on the market. 48 pins per package.
-
DUBICK gold plated short guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair - #DB701
DUBICK gold plated short guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair (NEW!)
-
JK Gear 64 pitch, 35T, 0° angle, 2 mm axle, Ø14.53 mm, w/screw- #G635m
JK Gear 64 pitch, 35T, 0° angle, 2 mm axle, Ø14.53 mm, w/screw- #G635m
Old catalog #JK42352
-
JK Gear 64 pitch, 37T, 0° angle, 2 mm axle, Ø15.35 mm, w/screw- #G637m
JK Gear 64 pitch, 37T, 0° angle, 2 mm axle, Ø15.35 mm, w/screw- #G637m
Old catalog #JK42372
-
DUBICK FANAT Electronic controller with banana plugs - #720BP
DUBICK Electronic controller
- suitable for all classes of models;
- adjust the sharpness of the transistor;
- high quality 30 amp transistor;
- electronic CHOKE;
- 30-speed gold-plated contact block;
- bronze contacts for maximum speed and braking;
- built-in voltmeter;
- complete protection against incorrect switching on. -
RALPH THORNE Clear Body 1/24 GTP Revolution, Lexan .007" (0.175 mm) - #REVOLUTION007
RALPH THORNE Clear Body 1/24 GTP Revolution
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .005" (0.125 mm) - #WARRIOR005
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .005" (0.125 mm) - #WARRIOR005
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .005" (0.125 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .007" (0.175 mm) - #WARRIOR007
RALPH THORNE Clear Body 1/24 GTP Warrior, Lexan .007" (0.175 mm) - #WARRIOR007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
KOLHOZA GUIDE TOOL - KZA001
Guide threading & Guide sanding tool in one
-
DUBICK Reinforcement tape for pin hole, 30 x 180 mm (1,18" x 7,1") - #707
DUBICK Reinforcement tape for pin hole, 30 x 180 mm (1,18" x 7,1") - #707
-
TWP Pin body harpoon - #TWP-PIN
TWP Pin body harpoon - #TWP-PIN
Convenient tool for the body preparing!
-
PARMA Paint mask 1/32 & 1/24 graphics design - #792
PARMA Paint mask 1/32 & 1/24 graphics design - #792
-
KA Donuts mounting tool
KA Donuts mounting tool
-
NeAn Clear "TEAPOT" 1/24 TOYOTA CELICA TURBO 4WD, Lexan, thickness .01" (0.25 mm), w/paint masks - #01-L
"TEAPOT" 1/24 Toyota Celica Turbo 4WD Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
OLEG Body Retro Formula 1/24 Lotus 63, Lexan .010" (0.254 mm) - #0124
Retro Formula 1/24 Lotus 63 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 6 pc. - #C40B-6
JK MOTOR BRACKET CHEETAH 25 CHASSIS, 1 pc. - #C40B
Old catalog #JK250115
-
MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050
MOSSETTI Patriot motor braces, 2 pcs. (fits jk) - #MR-1050
Spring steel .050" thick - nickel plated
-
ZHB .050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
.050" ALLEN WRENCH, W/OUT HANDLE, Г-type look
The simplest & cheap allen wrench for the beginning racers!
-
RED FOX Clear body Production 1/24 Corvette DTM (ISRA 2021), lexan, thickness .007" (0.175 mm), w/paint masks - #RFISRAVETTE7
RED FOX Clear body Production 1/24 Corvette DTM LEGAL FOR ISRA 2021
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
WRIGHTWAY Body pin punch - #WW90
WRIGHTWAY Body pin punch - #WW90
Body Pin Punches are for making pin holes in bodies.
-
MID AMERICA Guide nut - aluminum pin drive, black, 1 pc - #MID138B
MID AMERICA Guide nut - aluminum pin drive, black - #MID138B
Fits with #MID138
-
PARMA .050" (4/40) ALLEN WRENCH, W/OUT HANDLE - #558S
Standard allen wrench for wheel screws, etc.
-
KOLHOZA TIRE TRUER STANDART - KZA006
Includes 3/32 " & 2 mm axles and reserve rubber transmission belt
-
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
JK 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Allen Tip - #L14
Old catalog #JK8051
-
KOFORD .050" INSERT IN ALLEN WRENCH, straight, dia. 2 mm - #M163
Improved reduced diameter insert for the above wrench, also fits all standard handles
-
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK, for Phillips-head screwdriver, 1 pc. - #25196
ASSOCIATED STEEL SCREW M2 X 8 MM W/COUNTERSUNK HEAD, for Phillips-head screwdriver, 1 pc. - #25196
-
RALPH THORNE Clear Body 1/24 GTP Renegade, Lexan .007" (0.175 mm) - #RENEGADE007
RALPH THORNE Clear Body 1/24 GTP Renegade, Lexan .007" (0.175 mm) - #RENEGADE007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
DUBICK 2024 ES 1/32 Eurosport Chassis Assembled w/out ballbearings - #ES32
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
ZHB Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.
Ballbearing 1 х 3 х 1 mm open , 6 balls - 1 Pc.
-
JK Donut wizard mounting tool - #L19
JK Donut wizard mounting tool - #L19
Makes fitting of donuts easy.
Suitable for all 3/32" axle hubs / rims.
The wizard comes with 5 cones to suit most wheel sizes 8mm to 15mm
Manufactured from strong sturdy Nylon & Delrin with a hard steel 3/32" axleOld catalog #JK8075
-
ZHB Organiser 145×232×23 mm, transparent plastic
PARAMETERS
- Material: Transparent plastic
- Dimension, mm: 145×232×23
-
BOLID GM FORD AEROMAX BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks
GM 1/24 FORD AEROMAX Body
- Made from: Polyvinyl chloride (PVC)
- For: GM (Truck)
- Thickness: .015" (0.4 mm)
- w/interior &
- w/paint masks
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .007" (0.175 mm) - #VIKING007
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .007" (0.175 mm) - #VIKING007
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .007" (0.175 mm)
- Clear body
-
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
RALPH THORNE Clear Body 1/24 GTP Viking, Lexan .010" (0.254 mm) - #VIKING010
- Made from: Polycarbonate (Lexan)
- For: 1/24 GTP
- Thickness: .010" (0.254 mm)
- Clear body
-
CAMEN AIR/CONTROL KIT , THICKNESS .004" (0,1 mm), FULL SKIRT - #CMN5900.044
Air Control Kit including .014" Diaplane, .004" Skirted Side Dams and .004" Rear Spoiler
-
H&R Jack Rabbit motor 14,000 rpm - #MJR1
H&R Jack Rabbit motor 14,000 rpm - #MJR1
Mabuchi Replacement Type - Double ended Plain 2mm shaft
-
ATTAN Pit box, red
ATTAN Pit box, red
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
MID AMERICA Eagle retro motor - #MID606
MID AMERICA Eagle retro motor - #MID606
-
SLICK7 3/32" (2.36 MM), .005" (0.127 MM) THICK, STEEL AXLE SPACERS, 10 pcs. - SL7-21
3/32" (2.36 MM), .005" (0.127 MM) THICK, STEEL AXLE SPACERS, 10 pcs.
-
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
SLICK7 Steel arm spacers .003" (0,076 mm), 10 psc. - #SL7-20
-
SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012
SLICK7 3/32" (2.36 mm) .005" (1.27 mm) steel spacers, 10 pcs. - #SL7-SS0012
-
BSV Crown gear 48 pitch 26T, 3/32" axle, Ø16.7 mm - #BSV0726
BSV Crown gear 48 pitch 26T, 3/32" axle, Ø16.7 mm - #BSV0726
-
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc. - #412
PARMA 1/24 CHASSIS COTTER PIN for CHAMPION TURBOFLEX CHASSIS, 1 pc.
-
NeAn GM SCANIA BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #80-P
GM 1/24 SCANIA Body
- Made from: Polyvinyl chloride (PVC)
- For: GM (Truck)
- Thickness: .015" (0.4 mm)
- w/interior &
- w/paint masks
-
ZHB Ø1.16 mm FRONT AXLE, CARBON, (length ~ 80 mm)
Ø1.16 MM FRONT AXLE, CARBON, (length ~ 80 mm) used in Production 1/24 & Production 1/32 for made forward track with smal ribber wheels
-
ZHB REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
REAR WHEEL TIRES "MICROPORE", ID 9,5 mm, OD 33 mm, pair
Suitable for the model with any height of the rear axle, if necessary, you need to remove the "crust" on the machine for processing tires or lathe.
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: ~ 33
- Width, mm: 22
This tires cut for GM & F1/24 (Nesterenko)
-
Donuts EARacing, inside Ø 9.5 mm, outside ~ Ø 22 mm, length ~ 23 mm, pair
Good grip donuts for club races.
Better alternative for Pirania Light and Super Natural.
-
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
ALPHA Rear wheel donuts GREEN, treated, pair - #GREENT
1 pair of green treated tires for Production 1/32 or other classes
-
PROSLOT 2x5 MM CAN & ENDBELL OILITES (POWDER BRONZE), 1 pc. - #PSL2015
FX 2 X 5 Can & Endbell Replacement Oilites
-
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
Fit for 11 mm rims
Tiny pores, very firm, super sticky
-
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
H&R Hawk motor I 18,000 rpm @12V- double shaft - #MH1
-
CAHOZA CUT DOWN GRAPHITE GUIDE, non thread - #28
CUT DOWN GRAPHITE NYLON GUIDE
cut down guide for integral guide tongue chassis, content: black nylon, glass fibre, graphite -
ALPHA Rear wheel donuts GREEN, pair - #GREEN
ALPHA Rear wheel donuts GREEN, pair - #GREEN
1 pair of green tires for Production 1/32 or other classes
-
TAYLORACING FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
FRONT WHEEL STICKERS, set for 20 bodies, cut out along the counter - #006
Very convenient stickers for preparing your bodies for the passage of a technical commission
-
S&K FRONT RIMS FOR TEAPOT MODELS (TA 1/24), 1 PAIR - #540
FRONT RIMS FOR TEAPOR MODELS (TA 1/24), 1 PAIR - #540
This rims is made for pressing on the axle!
PARAMETERS
- dia., mm: 14
- width for gluing tires, mm: 5,5
- total width, mm: 12
- dia. of holes for set on axle Ø2 mm., mm : 1,8
-
ASSOCIATED STEEL NUT M2, 1 pc. - #25214
STEEL NUT M2, 1 pc.
Steel nut for fixing guides
-
KOFORD MEDIUM TIRE TRACTION, bottle - #M320
Medium tire traction. Ideal for G15 C12 and lower class cars which require a lighter glue
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, Lexan, thickness 0.125 mm - #100-L
INTERIOR FOR "TEAPOT" 1/24 BODIES
-
ZHB OPTIONAL TORSION for CHASSIS PRODUCTION 1/24 JK 4" "CHEETAH X25", Ø1.2 mm
ISRA legal torsion for JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25.
Allows you to quickly disassemble and assemble the chassis and still remains flat. -
DUBICK Lead wire retainers, 2 pcs. - #710
DUBICK Lead wire retainers, 2 pcs.
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, 10 pcs. - #U72-10
-
MID AMERICA Gear 64 pitch, 31T, 0° angle, 3/32" axle, Ø13.06 mm, w/screw - #MID16431
MID AMERICA Gear 64 pitch, 31T, 0° angle, 3/32" axle, Ø13.06 mm, w/screw - #MID16431
-
MID AMERICA .003" (0.08 mm) Stainless steel guide spacers, 8 pcs. - #MID147S
MID AMERICA .003" (0.08 mm) Stainless steel guide spacers, 8 pcs. - #MID147S
-
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
DUBICK 61/39 QUALITY SOLDER in storage tube, diameter 1mm, long 6 feet (1.8 m), 1 pc. - #211
-
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
MID AMERICA Paste flux filled syringe, 1 pc. - #MID110
-
WRIGHTWAY Paste flux - #WW10
WRIGHTWAY Paste flux - #WW10
Paste Flux in plastic syringe
-
KOLHOZA Clear Production 1/32 Peugeot body, Lexan thickness .005" (0.125 mm) - #0102T
Clear Production 1/32 Peugeot body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
ALPHA REAR WHEEL TIRES SBR BEIGE, pair - #NATURAL
ALPHA REAR WHEEL TIRES SBR BEIGE, pair
1 pair of orange tires for Production 1/32 or other classes
-
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
JK Screw 4/40" hollow in rims & gears, 0.050" hex, 1 pc. - #U62
-
KOFORD Ø2 mm AXLE, selection (length 55 mm) - #M639
2mm ultraprecision premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground. One per package
-
CAHOZA Ø2 mm AXLE (length 55 mm) - #24
SOLID AXLE 2MM
solid 2mm axle, highly durable 60HRc, axle is very fine grinded and polished, the 2mm diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 1,992mm (.07838"), length is 51mm (2") the best axle ever available for Scale racing -
ZHB Ballbearing 1.5 х 4 х 1.2 mm open , 6 balls - 1 Pc.
Ballbearing 1.5 х 4 х 1.2 mm open , 6 balls - 1 Pc.
-
ARP Pinion 80 PITCH 6T, 0° angle, 1.2 mm bore, heat treated - #ARP8006H
These are heat treated 80 pitch 6 tooth pinions with a 1.2 mm bore. Certified to RC55
-
KOLHOZA 1/24 Custom painted car interior, white, thin .005" (0,125 mm) - #0126-white
KOLHOZA 1/24 Custom painted car interior, white, thin .005" (0,125 mm) - #0126-white
-
KOLHOZA 1/24 Custom painted car interior, red, thin .005" (0,125 mm) - #0126-red
KOLHOZA 1/24 Custom painted car interior, red, thin .005" (0,125 mm) - #0126-red
-
KOLHOZA 1/24 Custom painted car interior, green, thin .005" (0,125 mm) - #0126-green
KOLHOZA 1/24 Custom painted car interior, green, thin .005" (0,125 mm) - #0126-green
-
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
K&S Brass strip .016" x 1/4" x 12" (0.41 mm x 6.35 mm x 300 mm) - #KS8230
-
KOFORD EDM Drilled (.040" hole) Ø2 mm AXLE, selection - #M743
KOFORD EDM Drilled Ø2 mm AXLE, selection
EDM drilled, 2mm .040 hole qualifying/race axle. premium plated axles for Eurosport made using ultrahigh strength steel and plated and ground.
-
KOFORD ALUMINUM SPRING CUPS (for 3 coils spring) ON ENDBELLS FOR EUROSPORT MOTORS, pair - #281
Self centering ultra light aluminum alloy spring cups for Koford set ups
-
MS-SLOTPARTS Gauge for cutting the braids
MS-SLOTPARTS Gauge for cutting the braids
Through the set dimension, cutting is always precisely at the same length. Unequal or cropped braids belong to the past.
-
KOFORD .003" (0.076 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M266
.003 phosphor bronze spacers,Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets, 12 per bag
-
CAHOZA ALUMINUM ANODISED SPRING POST /3 COIL,1 pair - #154
ANODISED SPRING POSTS - 3 COIL SPRINGS
aluminium anodised spring posts for 3 coil springs, spring post do not fit Cahoza plastic G12 endbells, suitable for hardware #170 and #171, packaged 10 pairs per bag -
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
JK Ø3/32" (2.36 mm) rear axle, for Eurosport 1/32, Production 1/32 & other cars in scale 1/32, length 1.968" (50 mm ) - #A9
Old catalog #JK55012
-
RED FOX C-can setup - #RFC0002
RED FOX C-can setup - #RFC0002
Only setup, without endbell, magnets, hardware & ball bearings.
-
KOLHOZA TIRE TRUER NEW - KZA0061
Updated configuration!
-
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
TAMIYA 1/14 R/C Team REINERT Racing MAN TGS (TT-01 Type-E) - #58642
Specifications
★Length:438mm, Width: 190mm, Height: 207mm ★Wheelbase: 257mm ★Tire Width/Diameter: 28/70mm ★Bathtub Type Chassis Frame ★Longitudinally-Mounted Motor Shaft-Driven Full-Time 4WD ★F/R 3-Bevel Differentials ★3-Piece Steering Tie-Rod ★4-Wheel Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio=8.35:1 ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) -
ATTAN Rim drilling tool (2 mm axle) - #ATTRDT 2 mm
ATTAN Rim drilling tool (2 mm axle) - #ATTRDT 2 mm
-
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21
JK 4" Cheetah 21 chassis kit .035" C-Can - #C21 -
4” Cheetah 21 Stainless Steel Chassis Kit .035” thick with screw in Falcon motor brace
Old catalog #JK25021
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*150 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
MID AMERICA 456 Braid, (sizes: 4.4 mm x 0.9 mm), pair - #MID405-1
MID AMERICA 456 Braid, pair - #MID405
Sizes: 4.4 mm x 0.9 mm (.173" x .035")
Heavy duty thick braid .with 456 strands of wire
-
DUBICK SEVEN-DIODES controller w/alligator clips - #727-7AC
DUBICK SEVEN-DIODES controller w/alligator clips
Variable brake for all motors up to 12 groups (Johnson, Hawk group, 16 & 12 group motors).
-
MAGNEHONE Hood tool - #MNH5000
MAGNEHONE Hood tool
Diamond coated hood tool, for brush hoods
-
MID AMERICA 456 Braid, (sizes: 4.4 mm x 0.9 mm), 30 pr. - #MID405
MID AMERICA 456 Braid, 30 pr. - #MID405
Sizes: 4.4 mm x 0.9 mm (.173" x .035")
Heavy duty thick braid .with 456 strands of wire
-
RED FOX Braid thin & wide, silver plated, 1 pair - #RFBRAIDW
RED FOX Braid thin & wide, silver plated, 1 pair - #RFBRAIDW
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø9.5 mm, ultra light - #BSV209,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV209,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 9.5 mm;
- W/offset of the hub;
- Ultra light.
-
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
Ralph Thorne Racing Stay clean flux pen
Ralph Thorne Racing Stay clean flux pen
New Stay-Clean Flux Pen
-
LUCKY BOB ACID FLUX W/BRUSH (45 ml) - #1200
ACID FLUX - IN A BOTTLE WITH A BRUSH
-
OLEG Clear Body Formula 1/24 McLaren MCL 35 2020, Lexan .007" (0.175 mm) - #0141
Clear Body Formula 1/24 McLaren MCL 35 2020
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
OLEG Clear Body Formula 1/24 Alpine A522 2022, Lexan .005" (0.125 mm) - #0146T
Clear Body Formula 1/24 Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
OLEG Clear Body Formula 1/24 Alpine A522 2022, Lexan .007" (0.175 mm) - #0146
Clear Body Formula 1/24 Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
BSV Crown gear 48 pitch 27T, 3/32" axle, Ø17.2 mm - #BSV0727
BSV Crown gear 48 pitch 27T, 3/32" axle, Ø17.2 mm - #BSV0727
-
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly - #PS-714 Pro-SRS
PROSLOT PRO-SRS Blueprinted C-Can, straightened perfectly
-
MID AMERICA Guide nut - aluminum pin drive, black, 1 cd. (6 pcs.) - #MID138B
MID AMERICA Guide nut - aluminum pin drive, black, 1 cd. (6 pcs.) - #MID138B
Fits with #MID138
-
MID AMERICA Guide nut - aluminum pin drive, red - #MID138R
MID AMERICA Guide nut - aluminum pin drive, red - #MID138R
Fits with #MID138
-
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
JK Hawk Premium Motor Brushes M3 & M6, 1 pair - #M36H
Old catalog #JK303065
-
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
JK Hawk Premium Motor Brushes M3 & M6, 6 pair - #M36H-6
Old catalog #JK303065
-
BSV LUXURY Donuts, inside Ø 9.3 mm (.370"), outside about Ø 19 mm (.750"), about 34 mm (1.338") width, pair
BSV LUXURY Donuts, inside Ø 9 mm (.354"), outside Ø 22 mm (.866"), about 34 mm (1.338") width, pair
Good for Production & Eurosport.
-
JK Hawk 6 Motor, *** Balanced *** - #M6
JK Hawk 6 Motor, *** Balanced *** - #M6
Old catalog #JK30306
-
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
JK Front wheel donuts, 0.375"ID (9,52 mm) x 0.850"OD (21,6 mm), firm, pair - #D1F
PARAMETERS
- Inside dia., in (mm): .375 (9,52)
- Outside dia., in (mm): .850 (21,6)
-
DUBICK Anodized spring cups / 3 coil springs - #716
DUBICK Anodized spring cups /3 coil springs
-
JK Precision machined 6 hole guide nut, PRO-version, 1 pc. Use with the JK#L30 guide nut tool - #U61
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
JK Precision machined 6 hole guide nut, PRO-version, 6 pc. Use with the JK#L30 guide nut tool. - #U61-6
JK Precision machined 6 hole guide nut, PRO-version. Use with the JK#L30 guide nut tool - #U61
-
MID AMERICA Metric aluminum guide nut, black - #MID133B
MID AMERICA Metric aluminum guide nut, black - #MID133B
Black Aluminum anodized metric guide nut. These work well on the guide flags that are threaded overseas (like Red Fox)
-
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
JK Cheetah AEOLOS 4" Production 1/24 chassis - #C26
Old catalog #C43
-
ATTAN Pit box, pink
ATTAN Pit box, pink
3 slots for wheel tubes, 2 slots for tire wrenches, 3 slots for axles, 6 slots for braids, 2 big slots for the rest.
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.370" (9.5 mm) - #MID850
MID AMERICA Carbon fiber rims - #MID850
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .370" (9.5 mm);
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.370" (9.5 mm), 1 cd. (6 pairs) - #MID850
MID AMERICA Carbon fiber rims, 1 cd. (6 pairs) - #MID850
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .370" (9.5 mm);
-
S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø9.5 mm, ultra light (1,55 gr/pair) - #SK9520
S&K PLASTIC RIMS, ultra light (1,55 gr/pair) - #SK9520
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,55
-
SRP Pit caddy
SRP Pit caddy
Don't forget to choose the color!
- Dimensions: 180x130mm / 7x5 in.,
- runs off 9V battery,
- 2 spots for tire wrenches,
- 3 spots for oil/braid juice,
- small magnet for holding pins,
- slot for Lane Stickers,
- Color Options: Black, Blue, Green, Yellow, Red, Orange, Purple, Clear.
-
ATTAN RANKING NUMBER STICKERS SHEET, height 8 mm, sheet 105 х 100 mm
ATTAN RANKING NUMBER SHEET, height 8 mm, sheet 105 х 100 mm
-
ATTAN MERCEDES AMG C 63 DTM STICKERS, w/cut outline, sheet 94 x 140 mm
ATTAN MERCEDES AMG C 63 DTM STICKERS, w/cut outline
-
SONIC Brass guide nut, low profile 1 pc. - #310-3
SONIC Brass guide nut, low profile 1 pc. - #310-3
Add weight for victory!
Weight 1.1 g.
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #U26-1
JK bushings in production chassis, pair
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
JK 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, 1 cd. (6 pairs) - #U26
JK bushings in production chassis, 1 cd. (6 pairs)
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm).
- Old catalog #JK5574
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*150 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick. - #C26T
JK Cheetah AEOLOS 4" Production 1/24 chassis, 0.04" thick.
0.039" Front 0.047" Rear
Old catalog #C43
-
PARMA Motor brushes, pair - #500K
Stock PARMA 16D motor brushes
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
JK Hawk 7 Motor *** COMPUTER BALANCED *** 48,000 RPM - #M7
Old catalog #JK30307
-
KOFORD 3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #M546-1
3/32" X 3/16" (2.36 MM X 4.76 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair
-
KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546
KOFORD 3/32" X 3/16" (2.36 mm X 4.76 mm) axle oilites in production chassis, 1 cd. (6 pairs) - #M546
-
MID AMERICA Acid flux (MAR-ACID) - #MID111
MID AMERICA Acid flux (MAR-ACID) - #MID111
Highly concentrated acid Flux - super strength. Non spillable bottle.
-
K&S Round brass tube 3/32" x .014" x 12" (2.36 mm x 0.355 mm x 304.8 mm), 1 pack (3 pcs.) - #KS8126
K&S Round brass tube 3/32" x .014" x 12" (2.36 mm x 0.355 mm x 304.8 mm), 1 pack (3 pcs.) - #KS8126
-
WRIGHT WAY Flux brush, 1 pc. - #WWFB
WRIGHT WAY Flux brush, 1 pc.
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 1 m (3 ft), insulation diameter .066" (1,67 mm) - #S7-546
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 3 m (10 ft), insulation diameter .058" (1,47 mm) - S7-553
SLICK7 LEAD WIRE 21Ga (section 0,41 mm²), yellow, 3 m (10 ft), insulation diameter .058" (1,47 mm) - S7-553
Very soft & thin lead wire.
The best chooise for Formula 1/32!
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM PLAYBOY BUNNY, Lexan .005" (0.125 mm) - #0121AT
Custom Painted Body Production 1/24 Audi RS5 DTM PLAYBOY BUNNY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Custom painted body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM PLAYBOY BUNNY, Lexan .007" (0.175 mm) - #0121A
Custom Painted Body Production 1/24 Audi RS5 DTM PLAYBOY BUNNY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM XXX RED BULL, Lexan .005" (0.125 mm) - #0121BT
Custom Painted Body Production 1/24 Audi RS5 DTM XXX RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Custom painted body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM XXX RED BULL, Lexan .007" (0.175 mm) - #0121B
Custom Painted Body Production 1/24 Audi RS5 DTM XXX RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM HOFFMAN GROUP, Lexan .007" (0.175 mm) - #0121C
Custom Painted Body Production 1/24 Audi RS5 DTM HOFFMAN GROUP
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
JK Hawk 7 Motor *** COMPUTER BALANCED *** with Dual Ball Bearings - #M7BB
Old catalog #JK30307BB
-
CASTRICONE 2021 ES Chassis Assembled without ballbearings
It is delivered under the order
-
HORKY 2024 F1-32 Chassis Assembled without ballbearings (picture can be not actual)
It is delivered to order in the latest available version at the time of order.
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM ARAL, Lexan .007" (0.175 mm) - #0121D
Custom Painted Body Production 1/24 Audi RS5 DTM ARAL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
VALIKO ARMATURE S-arm (slot ceramic, blue), WINDINGS 45/29, DIA. 0.460", STACK 0.240", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: C-arm
- Wingings: 45/29
- Dia.: 0.460"
- Stack: 0.240"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
KOLHOZA Clear body Eurosport 1/32 Audi R15 2008, lexan, thickness .007" (0.175 mm) - KZA#0124
KOLHOZA Clear body Eurosport 1/32 Audi R15 2008
This body is presented for legalisation by ISRA rules for the next vote!
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body.
-
DUBICK Adjustable DUBICK Fanat PRO controller chip
DUBICK Adjustable DUBICK Fanat PRO controller chip
-
ZHB Organiser 145×232×23 mm, green, w/transparent cover, plastic
These round polyethylene plastic snap lid containers with foam are though and strong. They are great for protection cans and setups when mailing them for service.
-
MID AMERICA Body harpoon - #MAR104
MID AMERICA Body harpoon
Body Harppon for punching pin holes in lexan bocies
-
DUBICK Electronic controller FANAT Pro
DUBICK Electronic controller FANAT Pro
-suitable for all classes of models;
-antibrake, antibrake correction;
-electronic CHOKE;
-Slow Attach/ fast Attachk function (innovation!!!)
-15 chips;
-built-in voltmeter;
-gold-plated contact block;
-holders for track board;
-Transistor Correction -
SONIC LIGHTWEIGHT DURALUMIN PURPLE ANODIZEG GUIDE NUT, 9,5 MM SOCKET, 1 pc. - #310-444
LIGHTWEIGHT DURALUMIN PURPLE ANODIZEG GUIDE NUT, 9,5 MM SOCKET, 1 pc.
-
JK 4" cheetah Aeolos center section - #C26C
JK 4" cheetah Aeolos center section - #C26C
-
MID AMERICA RTR 1/32 stomp car without body - #MID350
MID AMERICA RTR 1/32 stomp car without body - #MID350
Ready to Run car less body. Comes with Brass Stomp chassis and Retro Eagle motor. 1/8 axle and 48 pitch gears.
-
BPA Clear body ES-G12 Toyota GT ONE GB, lexan, thickness .007" (0.175 mm) - #K 033
Clear body ES-G12 Toyota GT ONE GB
- Made from: Polycarbonate (Lexan)
- For: ES-G12
- Thickness: .007" (0.175 mm)
- Clear body w/paint mask.
-
BPA Clear Body ES G12-24 outlaw Bentley WR, Lexan .005" (0.125 mm), with paint mask - #K 043-005
Clear Body ES G12-24 outlaw Bentley WR
- Made from: Polycarbonate (Lexan)
- For: ES G12-24 outlaw
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body ES G12-24 outlaw Bentley WR, Lexan .007" (0.175 mm), with paint mask - #K 043-007
Clear Body ES G12-24 outlaw Bentley WR
- Made from: Polycarbonate (Lexan)
- For: ES G12-24 outlaw
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body ES G12-24 Bentley EXP GB, Lexan .005" (0.125 mm), with paint mask - #K 044-005
Clear Body ES G12-24 Bentley EXP GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body ES G12-24 Bentley EXP GB, Lexan .007" (0.175 mm), with paint mask - #K 044-007
Clear Body ES G12-24 Bentley EXP GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body ES G12-24 Lola GB, Lexan .005" (0.125 mm), with paint mask - #K 049-005
Clear Body ES G12-24 Lola GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .005" (0.125 mm)
- Clear body
-
DUBICK Controller chip 29 Ohm for DUBICK Electronic controller - #722-29
DUBICK Controller chip 29 Ohm for DUBICK Electronic controller
-
KOLHOZA EUROSPORT 1/32 AUDI R15 TDI BODY, LEXAN, thickness .005" (0.125 mm) - #656-LT
EUROSPORT 1/32 Audi R15 TDI Body
ISRA LEGAL 2015-2020
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
-
DUBICK Controller chip 58 Ohm for DUBICK Electronic controller - #722-58
DUBICK Controller chip 58 Ohm for DUBICK Electronic controller
-
JK Body Guide Cutting Tool - #L80
JK Body Guide Cutting Tool - #L80
Professional tool for easy & smooth cutting of the body
-
ZHB Digital Calipers 150 mm (6"). Accuracy: +/- .02mm/.001inch. Plastic box and 2 pc battery.
Specs:
Range: 0-150mm
Accuracy: +/- .02mm/.001inch
Resolution: .01mm/0.0005inch
Repeatability: 0.01mm/0.0005inch
Max Measuring Speed: 1.5m/s, 60inch/s (FAST)
Operating Temp: 0~40Deg Celcius
Storage Temp: -10~60Deg Celcius
Power: 1.5v SR44 Battery -
DUBICK Anodized spring cups / 5 coil springs - #717
DUBICK Anodized spring cups / 5 coil springs
-
KOLHOZA SLOT CAR BOX "SPORTSMAN WORKING PLACE" - #KZA005
Includes travel bag with wheels.
Width - 430 mm (17,3"); Height - 310 mm (12,6"); Depth - 195 mm (7,87")
All small boxes, as in the photo, are included. This sizes are good to the norms of hand luggage, so you can take the box to the cabin, which is very convenient for travels. There is no built-in lighting. All box have department for 1/32 and 1/24 models and for tools.
Cost of delivery are discussed individually
-
DUBICK Electronic controller Pro version
DUBICK Electronic controller Pro version
- -suitable for all classes of models;
- -more functional than S&K, Kobis or DiFalco controllers;
- -antibrake, antibrake correction;
- -wire CHOKE;
-traction control;
- -one or two transistors in use;
- -adjust the sharpness of the transistor;
- -15 chips;
- -built-in voltmeter;
- -gold-plated contact block;
- -full protection against incorrect switching on.
-
DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs. - #708
DUBICK .004" (0.1 mm) Precision steel guide spacers, 6 pcs.
-
CAHOZA ARM SPACER BRONZE .004", 24 psc. - #36
PHOSPHOR BRONZE SPACERS 0,1
phosphor bronze spacers, thickness 0,1 mm (.004"), ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard, but will not stick to magnets, packaged 24 per bag -
PARMA SUPER BRAID CONDITIONER - #665А
Use our specially formulated braid conditioner to keep braid soft and pliable, great for breaking in and less resistance
-
REH PINION GEAR 48 PITCH, 6T , 2 mm bore, BRASS (This is press-on style pinion gear) - #REH6165
REH PINION GEAR 48 PITCH, 6T , 2 mm bore, BRASS (This is press-on style pinion gear) - #REH6165
-
DUBICK Pinion gear 48 pitch, 6T, 2 mm bore, brass (This is solder style pinion gear) - #501-6
48 pitch Straight stainless steel 6 tooth pinion gears
IN STOCK!
-
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406
DUBICK Precut Brass pin tubes, length 10.8 mm, 4 pcs.- #406
Brass pin tubing for chassis 10.8 mm -4/10 of an inch.
-
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
DUBICK Precut Brass pin tubes, length 10.8 mm, storage tube (24 pcs.) - #407
Brass pin tubing for chassis 10.8 mm -4/10 of an inch
-
PARMA 4/40" ALLEN SCREW in rims & gears, 1 pc. - #555
Replacement 4/40 allen head set screws for Slot Car Front Wheels, Rear Wheels and Spur Gears.
-
KOLHOZA SHIELDED BALLBEARING 3 x 7 x 3 mm FOR TIRE TRUERS KZA006, KZA0061 - KZA0066
Reserve shielded ballbearing 3x7 mm for TIRE TRUERS KZA006, KZA0061
-
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
DUBICK Diamond hone for increase inside tire diameter till 10,5 mm (0,413")
-
ZHB Organiser 145×232×23 mm, blue, w/transparent cover, plastic
PARAMETERS
- Material: Transparent plastic
- Dimension, mm: 50×45×15
- Quantity of sections, pcs.: 1
-
WRIGHT WAY Flux brush, 4 pc. - #WWFB4
WRIGHT WAY Flux brush, 4 pc.
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121F
Custom Painted Body Production 1/24 Audi RS5 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121G
Custom Painted Body Production 1/24 Audi RS5 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #PS-680-32
PROSLOT Gear 64 pitch, 32T, 0° angle, 3/32" axle, Ø13.65 mm, w/screw- #680-32
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #PS-680-33
PROSLOT Gear 64 pitch, 33T, 0° angle, 3/32" axle, Ø14.05 mm, w/screw- #670-36
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm - #G634
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm - #G634
Old catalog #JK42341
-
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, narrow - #G634N
JK Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.18 mm, narrow - #G634N
Old catalog #JK4234F
-
PARMA Crown gear, 48 pitch 27 teeth, 1/8" axle, Ø16.8 mm - #PAR3327
PARMA Crown gear, 48 pitch 27 teeth, 1/8" axle, Ø16.8 mm - #PAR3327
-
PARMA Crown gear, 48 pitch 27 teeth, 3/32" axle, Ø16.8 mm - #PAR3327
PARMA Crown gear, 48 pitch 27 teeth, 3/32" axle, Ø16.8 mm - #PAR3327
-
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened - #M671-27
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened - #M671-27
-
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-27
KOFORD Crown gear 48 pitch 27 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-27
-
RED FOX Crown gear 48 pitch 27 teeth, 3/32" axle - #RFCROWN27TN
RED FOX Crown gear 48 pitch 27 teeth, 3/32" axle - #RFCROWN27TN
-
S&K Gear 72 PITCH 41T, 16° angle, 3/32" axle, Ø14.9 mm - #SK4172A
S&K Gear 72 PITCH 41T, 16° angle, 3/32" axle, Ø14.9 mm - #SK4172A
-
ARP Pinion gear 48 pitch, 6T, 2 mm bore, steel - #arp4806s
ARP Pinion gear 48 pitch, 6T, 2 mm bore, steel - #arp4806s
48 pitch Straight stainless steel 6 tooth pinion gears
-
PARMA PINION GEAR 48 PITCH, 7T, BRASS (This is press-on style pinion gear) - 1 Pc - #520BP
High quality nickel plated brass motor pinions. These are press-on style and replacements for stock 16D motors, etc.
-
DUBICK Pinion gear 48 pitch, 7T, 2 mm bore, brass (This is solder style pinion gear) - #DB501-7
48 pitch Straight stainless steel 7 tooth pinion gears
IN STOCK!
-
JK PINION GEAR 48 PITCH, 7T , 2 mm bore, STEEL - #P47S
JK PINION GEAR 48 PITCH, 7T , 2 mm bore, STEEL - #P47S
48 pitch 7 tooth solder on pinion
Old catalog #JK4207
-
ARP Pinion gear 48 pitch, 7T, 2 mm bore, steel - #arp4807s
ARP Pinion gear 48 pitch, 7T, 2 mm bore, steel - #arp4807s
48 pitch Straight stainless steel 7 tooth pinion gears
-
ARP Pinion gear 48 pitch 6T, angle, 2 mm bore STEEL - #arp4806a
ARP Pinion gear 48 pitch 6T, angle, 2 mm bore STEEL - #arp4806a
48 pitch Tru bevel stainless steel 6 tooth pinion gears.
-
KOLHOZA Clear Production 1/32 Peugeot body, Lexan thickness .007" (0.175 mm) - #0102
Clear Production 1/32 Peugeot body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
Special order!
-
KOLHOZA Clear Production 1/32 Audi w/fin body, Lexan thickness .005" (0.125 mm) - #0120T
Clear Production 1/32 Audi w/fin body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
Special order!
-
KOLHOZA Clear Production 1/32 Audi w/fin body, Lexan thickness .007" (0.175 mm) - #0120
Clear Production 1/32 Audi w/fin body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
Special order!
-
PARMA Motor brushes & springs, 1 set - #500DK
PARMA Motor brushes & springs, 1 set - #500DK
Stock PARMA 16D brushes & springs
-
PROSLOT Replacement motor brushes for EURO MK1 motor, 1 cd. (6 pr.) - #PS-4014
PROSLOT Replacement motor brushes for EURO MK1 motor, 1 cd. (6 pr.) - #PS-4014
-
PROSLOT Production motor brushes, 1 pair - #PS-623
PROSLOT Production motor brushes, 1 pair - #PS-623
-
PROSLOT Production motor brushes, 1 cd. (6 pr.) - #PS-623
PROSLOT Production motor brushes, 1 cd. (6 pr.) - #PS-623
-
VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm) - #A1000
VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm)
Axles are made of hardened tool steel 60HRC. Axles have the deflection to the limit of 0.01 mm and the tolerance of the diameter 0.002 mm.
-
PROSLOT MOTOR BRUSHES SpeedFX, pair - #2014
Pair of Speed FX motor brushes.
Basic brushes, which are equipped with new motors PROSLOT 16D
-
PROSLOT MOTOR BRUSHES SpeedFX, 6 pairs - #2014
Pack of 6 pairs of Speed FX motor brushes.
Basic brushes, which are equipped with new motors PROSLOT 16D
-
PROSLOT SMQ (SINGLE MAGNET QUADS) MATCHED MAGNETS FOR C-CANS, pair - #PS906
SMQ (Single Magnet Quads) Matched Magnets for Proslot motors group 12.
-
CAHOZA C CAN TYPE "UL" - #252
C-CAN TYPE UL
Cahoza C-can, produced from 0,4mm (.0157") thick hardmetal plate -
PROSLOT MEGA III MATCHED MAGNETS FOR C-CANS (X-12), pair - #PS912
MEGA III Matched Blue Dot Magnets - same as our PS-908 only .450 long
Selected tool magnets for C-cans (group 12 motors)
-
KOFORD Ø.484" (12.29 mm) bearing assembly tool (for Eurosport motor) - #M523-484
KOFORD Ø.484" (12.29 mm) bearing assembly tool (for Eurosport motor) - #M523-484
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.485" (12.32 mm) bearing assembly tool (for Eurosport motor) - #M523-485
KOFORD Ø.485" (12.32 mm) bearing assembly tool (for Eurosport motor) - #M523-485
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.486" (12.34 mm) bearing assembly tool (for Eurosport motor) - #M523-486
KOFORD Ø.486" (12.34 mm) bearing assembly tool (for Eurosport motor) - #M523-486
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.487" (12.37 mm) bearing assembly tool (for Eurosport motor) - #M523-487
KOFORD Ø.487" (12.37 mm) bearing assembly tool (for Eurosport motor) - #M523-487
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.488" (12.39 mm) bearing assembly tool (for Eurosport motor) - #M523-488
KOFORD Ø.488" (12.39 mm) bearing assembly tool (for Eurosport motor) - #M523-488
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.489" (12.42 mm) bearing assembly tool (for Eurosport motor) - #M523-489
KOFORD Ø.489" (12.42 mm) bearing assembly tool (for Eurosport motor) - #M523-489
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.490" (12.45 mm) bearing assembly tool (for Eurosport motor) - #M523-490
KOFORD Ø.490" (12.45 mm) bearing assembly tool (for Eurosport motor) - #M523-490
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.491" (12.47 mm) bearing assembly tool (for Eurosport motor) - #M523-491
KOFORD Ø.491" (12.47 mm) bearing assembly tool (for Eurosport motor) - #M523-491
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.500" (12.7 mm) bearing assembly tool (for Eurosport motor) - #M523-500
KOFORD Ø.500" (12.7 mm) bearing assembly tool (for Eurosport motor) - #M523-500
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.501" (12.72 mm) bearing assembly tool (for Eurosport motor) - #M523-501
KOFORD Ø.501" (12.72 mm) bearing assembly tool (for Eurosport motor) - #M523-501
Prepare your motor fast & precise. Short length just for Euro set ups.
This is no actual photo! Actual photo will be added later!
-
KOFORD Ø.498" (12.65 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-498
In stock
One of the most used sizes for ES32 and ES24!
-
KOFORD Ø.500" (12.7 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-500
In stock
One of the most used sizes for ES32 and ES24!
-
Koford Yellow spoiler sticker, 1 pc. - #M719
Koford Yellow spoiler sticker, 1 pc. - #M719
Decorate your body with branded stickers :)
-
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
PROSLOT Blueprinted C-Can straightened perfectly - #PS-714 Pro-VIP
-
CAHOZA ANODIZED 5 COIL SPRING POSTS, 1 pair - #157
ANODISED SPRING POSTS - 5 COIL SPRINGS
aluminium anodised spring posts for 5 coil springs, avaliable in red-blue and red-black combinations, suitable for hardware #170 and #171, packaged 10 pairs per bag -
Slotracingshop.com Tire durometer w/protective hard shell plastic case
Tire durometer w/protective hard shell plastic case
-
TAMIYA 1/14 R/C Mercedes-Benz Race Truck Actros MP4 MB Motorsport (TT-01 Type-E) - #58683
TAMIYA 1/14 R/C Mercedes-Benz Race Truck Actros MP4 MB Motorsport (TT-01 Type-E) - #58683
For more information click here: https://www.tamiya.com/english/products/58683/index.htm
-
TAMIYA Masking tape for curves, width 2 mm - #TAM87177
TAMIYA Masking tape for curves, width 2 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape for curves, width 3 mm - #TAM87178
TAMIYA Masking tape for curves, width 3 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
PARMA 500 SERIES MOTOR SPRINGS - #500D
Replacement springs for all 16D motors
-
JK BRASS PIN TUBING, lenght 10.8 mm, 4 psc. - #U50
JK BRASS PIN TUBING, length 10.8 mm, 4 psc. - #U50
Old catalog #JKP9171
-
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209
DUBICK Lead sheet thickness 0.5 mm, 50 х 50 mm (.019", 1.968" x 1.968") with a 3M selfstick adhesive tape - #209
Lead sheet thickness 0.5 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
DUBICK Lead sheet thickness 1 mm, 50 х 50 mm (.039", 1.968" x 1.968") with a 3M selfstick adhesive tape - #210
Lead sheet thickness 1 mm, 50 х 50 mm with a adhesive tape can help you to configure your chassis.
The presence of stick layer eliminates the need for glue application and simplifies the work! -
DUBICK Controller chip 78 Ohm for DUBICK Electronic controller - #722-78
DUBICK Controller chip 78 Ohm for DUBICK Electronic controller
-
BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle - #BSV7237332
BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle - #BSV7237332
-
ZHB Organiser 104×176×23 mm, with 15 configurable compartments, clear plastic
PARAMETERS
- Material: Transparent plastic
- Dimension, mm: 75×60×18
- Quantity of sections, pcs.: 6
- *For small parts
-
PARMA BIG MAMA 408 BRAID, 1 PAIR - #663-1
Heavy duty braid (408 strands) for all slot cars. 1 Pair
-
PARMA BIG MAMA 408 BRAID, 100 PAIRS - #663-B
Heavy duty braid (408 strands) for all slot cars. 1 Pair
-
MID AMERICA 300 strand braid, .022" thick, 1 pair - #MID400
MID AMERICA 300 strand braid, .022" thick, 1 pair - #MID400
-
MID AMERICA 300 strand braid, .022" thick, 10 pairs - #MID400
MID AMERICA 300 strand braid, .022" thick, 10 pairs - #MID400
-
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620
Pinions are EDM made from hardened tool steel. The shapes of the tooth were computer designed for low friction and the best run. Round running of the pinions is to the limit of 0.01 mm.
-
HORKY PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
HORKY PINION 64PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #H64P-6-2
-
SONIC PINION 64 PITCH, 7T , 0° ANGLE, 2 mm bore - #30-07
SONIC PINION 64 PITCH, 7T , 0° ANGLE, 2 mm bore - #30-07
7 tooth 64 pitch hardened pinion.
They cut all their pinions individually on a dedicated gear machine for maximum tooth precision.
-
CAHOZA Light braid, 408 strands, .023" thick, 1 pair - #340
CAHOZA Light braid, 408 strands, .023" thick, 1 pair - #340
these braids size is 4.5 x 0.6 x 30 mm (.177" x .023" x 1.181"), 408 strands, made from very pure copper (99.9 %), these braids are ideal for PR24, ES24, SP32 and F1/32, they will last longer, the production process is finalized by Cahoza (handmade)
-
WRIGHT WAY Flux brush, 12 pc. - #WWFB12
WRIGHT WAY Flux brush, 12 pc.
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, PVC, thickness 0.2 mm - #100-P
INTERIOR FOR "TEAPOT" 1/24 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness, mm: 0,2
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER, Lexan, thickness 0.125 mm - #101-L
INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER
-
CAMEN Air control kit .004" full skirt - #5900.045
CAMEN Air control kit .004" full skirt - #5900.045
Air Control Kit including .014" Diaplane, .004" Skirted Side Dams and .005" Rear Spoiler
-
CAMEN Air control kit .004" half skirt - #5905.044
CAMEN Air control kit .004" half skirt - #5905.044
Air Control Kit including .014" Diaplane, .004" "Half Skirt" Side Dams and .004" Rear Spoiler
-
CAMEN Air control kit .004" half kit - #5905.045
CAMEN Air control kit .004" half kit
Air Control Kit including .014" Diaplane, .004" "Half Skirt" Side Dams and .005" Rear Spoiler
-
CAMEN Air control kit .004" skirtless - #5910.044
CAMEN Air control kit .004" skirtless - #5910.044
Air Control Kit including .014" Diaplane, .004" Non Skirted Side Dams and .004" Rear Spoiler
-
CAMEN Air control kit .004" skirtless - #5910.045
CAMEN Air control kit .004" skirtless - #5910.045
Air Control Kit including .014" Diaplane, .004" Non Skirted Side Dams and .005" Rear Spoiler
-
CAMEN Air control kit .004" rear spoiler - #5980.004
CAMEN Air control kit .004" rear spoiler - #5980.004
6 pieces of .004 thick rear spoilers
-
CAMEN Air control kit .005" full skirt - #CMN5900.055
CAMEN Air control kit .005" full skirt - #CMN5900.055
Air Control Kit including .014" Diaplane, .005" Skirted Side Dams and .005" Rear Spoiler
-
CAHOZA Medium braid, 552 strands, .027" thick, 1 pair - #341
CAHOZA Medium braid, 552 strands, .027" thick, 1 pair - #341
these braids size is 4.8 x 0.7 x 30 mm (.188" x .027" x 1.181"), 552 strands, made from very pure copper (99.9 %), these braids are ideal for PR24 and ES24, they will last longer, the production process is finalized by Cahoza (handmade)
-
RED FOX Clear Body Formula 1/32 Ferrari F1 HALO (ISRA 2023 - 2026), Lexan .005" (0.125 mm) - #RFF1ISRA23
RED FOX Clear Body Formula 1/32 Ferrari F1 HALO LEGAL FOR ISRA 2023-2026
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
BSR Crown gear 72 pitch 30 teeth, 2 mm axle, Ø13.05 mm, w/Ti hub, weight 0,81 g.
BSR Crown gear 72 pitch 30 teeth, 2 mm axle, Ø13.05 mm, w/Ti hub, weight 0,81 g.
-
CAMEN Air control kit .005" half skirt - #5905.055
CAMEN Air control kit .004" half skirt - #5905.055
Air Control Kit including .014" Diaplane, .005" "Half Skirt" Side Dams and .005" Rear Spoiler
-
MID AMERICA Condor motor 16D size - #MID603
MID AMERICA Condor motor 16D size - #MID603
16D can with a nice fast arm.
Slightly faster than a S16D arm
-
SLICK7 OILER BOTTLER CAP - #SL7531
oiler replacement caps - now you can safely lose this cap from the oil bottle!!!:)))))
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM, Lexan .007" (0.175 mm) - #0121H
Custom Painted Body Production 1/24 Audi RS5 DTM
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
CAHOZA Heavy braid, 624 strands, .031" thick, 1 pair - #342
CAHOZA Heavy braid, 624 strands, .031" thick, 1 pair - #342
these braids size is 5.0 x 0.8 x 30 mm (.196" x .031" x 1.181"), 624 strands, made from very pure copper (99.9 %), these braids are ideal for wing cars, they will last longer, the production process is finalized by Cahoza (handmade)
-
DUBICK Plastic box 75 х 132 х 16 mm (2.96" x 5.2" x 0.63") w/12 individual boxes - #DB214
DUBICK Plastic box 75 х 132 х 16 mm (2.96" x 5.2" x 0.63") w/12 individual boxes
- Material: plastic with transparent cover.
- Dimension, mm (in.): 75 х 132 х 16 mm (2.96" x 5.2" x 0.63").
- Quantity of sections, pcs.: 40.
- Small storage box for parts great for storing pinions etc.
-
PROSLOT SpeedFX X12 REPLACEMENT BALANCED ARMATURE - #PS3006
FX X12 Replacement Balanced Armature (commutator trued)
-
RALPH THORNE Clear Body 4.5" Dirt Oval Dirt Late Modified, Lexan .007" (0.175 mm) - #DLM007
RALPH THORNE Clear Body 4.5" Dirt Oval Dirt Late Modified, Lexan .007" (0.175 mm) - #DLM007
- Made from: Polycarbonate (Lexan)
- For: 4.5" Dirt Oval
- Thickness: .007" (0.175 mm)
- Clear body
-
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw - #PS-680-34
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw - #PS-680-34
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34
PROSLOT Gear 64 pitch, 34T, 0° angle, 3/32" axle, Ø14.3 mm, w/screw, 1 cd. (6 pcs.) - #PS-680-34
The tooth shape was computer designed for less friction. All new hub design for truer running and will never spin on the hub
-
DUBICK Controller chip 95 Ohm for DUBICK Electronic controller - #722-95
DUBICK Controller chip 95 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 113 Ohm for DUBICK Electronic controller - #722-113
DUBICK Controller chip 113 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 144 Ohm for DUBICK Electronic controller - #722-144
DUBICK Controller chip 144 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 194 Ohm for DUBICK Electronic controller - #722-194
DUBICK Controller chip 194 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 238 Ohm for DUBICK Electronic controller - #722-238
DUBICK Controller chip 238 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 290 Ohm for DUBICK Electronic controller - #722-290
DUBICK Controller chip 290 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 319 Ohm for DUBICK Electronic controller - #722-319
DUBICK Controller chip 319 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 348 Ohm for DUBICK Electronic controller - #722-348
DUBICK Controller chip 348 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip 377 Ohm for DUBICK Electronic controller - #722-377
DUBICK Controller chip 377 Ohm for DUBICK Electronic controller
-
DUBICK Controller chip (custom resistance) for DUBICK Electronic controller
DUBICK Controller chip (custom resistance) for DUBICK Electronic controller
-
NEAN BLACK CONTROLLER HANDLE, small - #171
Replacement controller handle for Controllers
-
NEAN BLACK CONTROLLER HANDLE, big - #172
Replacement controller handle for Electronic Controllers
-
DIFALCO Clear Controller Handle with Hardware - #DD850
DIFALCO Clear Controller Handle with Hardware
-
ARP PINION GEAR 64 PITCH, 7T, 0° ANGLE, , 2 mm bore - #6407
ARP PINION GEAR 64 PITCH, 7T, 0° ANGLE, , 2 mm bore
-
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
CAHOZA EDM pinion 64 pitch, 7T, 0° angle, 2 mm bore, special black cover - #12
EDM pinions 64 pitch 7T - 2mm hole, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 64 pitch gears
-
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
JK Hawk motor, *** Balanced *** w/new optional endbell - #M3
HAWK MOTOR-58000 RPM +,-. The endbell is new for the bigger American made armatures. The armature that comes in the motor is the same specifications as the 3030, but the wires leading to the comm have been tired up for better performance and reliability. This motor replaces the 3030 Hawk motor.
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK3031
-
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
KOFORD Flanged bushing 2 x 5 mm for can & endbell, 1 pc. - #M509
5MM flanged bushing for Super Feather can & endbell.
-
OLEG Body Retro 1/24 March 707, Lexan .010" (0.254 mm) - #0125
Retro 1/24 March 707 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
PROSLOT VIP C-CAN SETUP KIT W/O MAGNETS - #PS-749VIP
C-can Setup kit (without magnets). Prepared set of C-CAN X-12, w/out magnets. The can looks like the photo.
-
ATTAN Gear holder (2 mm & 3/32" axles) for straightness checker for axle, rim & gear
ATTAN Gear holder (2 mm & 3/32" axles) for straightness checker for axle, rim & gear
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), red, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), red, 1 m
-
TURNIGY LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
LEAD WIRE 20Ga (section 0,52 mm²), black, 1 m
-
OLEG Custom Painted Body Production 1/24 Audi RS5 DTM RED BULL, Lexan .007" (0.175 mm) - #0121I
Custom Painted Body Production 1/24 Audi RS5 DTM RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Retro Formula 1/24 Lotus 63 ESSEX MICHELIN, Lexan .010" (0.254 mm) - #0124P1
Custom Painted Body Retro Formula 1/24 Lotus 63 ESSEX MICHELIN
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 Lotus 63 LOTUS HONDA, Lexan .010" (0.254 mm) - #0124P2
Custom Painted Body Retro Formula 1/24 Lotus 63 LOTUS HONDA
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Production 1/24 Aston Martin Vantage PINK DTM 2019, Lexan .007" (0.175 mm) - #0131A
Custom Painted Body Production 1/24 Aston Martin Vantage PINK DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Aston Martin Vantage PETRONAS DTM 2019, Lexan .007" (0.175 mm) - #0131B
Custom Painted Body Production 1/24 Aston Martin Vantage PETRONAS DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Production 1/24 Aston Martin Vantage JAMES BOND DTM 2019, Lexan .007" (0.175 mm) - #0131C
Custom Painted Body Production 1/24 Aston Martin Vantage JAMES BOND DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Retro 1/24 Buick Riviera 1969 PLAYBOY, Lexan .015" (0.381 mm) - #0132P1
Custom Painted Body Retro 1/24 Buick Riviera 1969 PLAYBOY
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 Brabham BT26 1969, Lexan .010" (0.254 mm) - #0133P1
Custom Painted Body Retro Formula 1/24 Brabham BT26 1969
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 Brabham BT26 1969 MARTINI, Lexan .010" (0.254 mm) - #0133P2
Custom Painted Body Retro Formula 1/24 Brabham BT26 1969 MARTINI
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro Formula 1/24 AAR Indy Eagle 1968 PENNZOIL, Lexan .010" (0.254 mm) - #0134P1
Custom Painted Body Retro Formula 1/24 AAR Indy Eagle 1968 PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967 SHELBY GOODYEAR, Lexan .010" (0.254 mm) - #0135P1
Custom Painted Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967 SHELBY GOODYEAR
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Healey SR Coventry Climax 1968 PENNZOIL, Lexan .010" (0.254 mm) - #136P1
Custom Painted Body Retro 1/24 Healey SR Coventry Climax 1968 PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 McLaren M12 Can-Am 1969 TEXACO GOODYEAR, Lexan .010" (0.254 mm) - #0138P1
Custom Painted Body Retro 1/24 McLaren M12 Can-Am 1969 TEXACO GOODYEAR
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Buick Gran Sport 1967 BAD BOY, Lexan .015" (0.381 mm) - #0139P1
Custom Painted Body Retro 1/24 Buick Gran Sport 1967 BAD BOY
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Custom painted body
-
OLEG Custom Painted Body Retro 1/24 Dodge Dart 1968 FLAMES, Lexan .010" (0.254 mm) - #0140P1
Custom Painted Body Retro 1/24 Dodge Dart 1968 FLAMES
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Custom painted body
-
BSR Crown gear 72 pitch 30 teeth, offset 0.5 mm, 2 mm axle, Ø13.05 mm, w/Ti hub, weight 0,81 g.
BSR Crown gear 72 pitch 30 teeth, offset 0.5 mm, 2 mm axle, Ø13.05 mm, w/Ti hub, weight 0,81 g.
-
MID AMERICA Power plus premium motor brushes, 1 pair - #MID650
MID AMERICA Power plus premium motor brushes, 1 pair - #MID650
-
R-GEO Cahoza gear driller - #615
R-GEO Cahoza gear driller - #615
Tool for decrese the total weight of the gear.
See the description on the following photo.
-
PROSLOT Replacement Springs 90 degrees, 3 coils, pair - #PS-4013-90
PROSLOT Replacement Springs 90 degrees, 3 coils, pair - #PS-4013-90
-
PROSLOT Replacement Springs 90 degrees, 3 coils, 1 cd. (6 pair) - #PS-4013-90-6
PROSLOT Replacement Springs 90 degrees, 3 coils, 1 cd. (6 pair) - #PS-4013-90-6
-
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
SLICK7 Berrilium arm spacers .005" (0,127 mm), 10 psc. - #SL796
-
PROSLOT X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS - #PS-749SRS
X-12 SRC C-CAN SETUP KIT W/OUT MAGNETS
-
BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7237332led
BSV Gear 72 pitch, 37T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7237332led
Suitable for ES 1/32
-
S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm - #SK3772
S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm - #SK3772
available only for special order!
-
TAMIYA R/C TT-01 A parts - #51002
TAMIYA R/C TT-01 A parts - #51002
-
TAMIYA R/C TT-01 G parts - #51004
TAMIYA R/C TT-01 G parts - #51004
-
TAMIYA R/C On road truck wheels F/R (2 e.a.) - #51588
TAMIYA R/C On road truck wheels F/R (2 e.a.) - #51588
Beautifully detailed plated wheels. Designed just for racing truck models
-
TAMIYA R/C On road truck tires, 2 pcs. - #51589
TAMIYA R/C On road truck tires, 2 pcs. - #51589
70mm-diameter tires were designed just for racing truck models.
-
TAMIYA R/C RS-540 Torque-tuned motor - #54358
TAMIYA R/C RS-540 Torque-tuned motor - #54358
Tamiya has developed this new Torque-Tuned motor, which offers performance that is between that of a standard Type 540 motor and Item 53068 Sport-Tuned Motor. Compared to a standard Type 540 motor, it offers a higher top speed and improved acceleration when used with RC car models with standard gear ratios.
-
BOLID-NeAn Clear body 1/32 Mazda Rental, Lexan .005" (0.125 mm) - #67-L-5
Clear body 1/32 Mazda Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .005" (0.125 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/32 Mazda Rental, Lexan .007" (0,175 mm) - #67-L-7
Clear body 1/32 Mazda Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .007" (0.175 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/32 McLaren F1 Rental, Lexan .005" (0.125 mm) - #68-L-5
Clear body 1/32 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .005" (0.125 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/32 McLaren F1 Rental, Lexan .007" (0.175 mm) - #68-L-7
Clear body 1/32 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/32
- Thickness: .007" (0.175 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/24 McLaren F1 Rental, Lexan .005" (0.125 mm) - #74-L-5
Clear body 1/24 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .005" (0.125 mm)
- Clear body with paint masks
-
BOLID-NeAn Clear body 1/24 McLaren F1 Rental, Lexan .007" (0.175 mm) - #74-L-7
Clear body 1/24 McLaren F1 Rental
- Made from: Polycarbonate (Lexan)
- For: 1/24
- Thickness: .007" (0.175 mm)
- Clear body with paint masks
-
KOFORD HAWK MOTOR W/KOFORD 12 ARM - KOF647
JK Hawk motor with Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs.
-
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
KOFORD Hawk 12 motor w/bonded neo magnets - #M712
JK Hawk motor with with bonded Neo magnets and Koford 12 arm, Super Big Foot 2 brushes and silver conductive springs
-
OLEG Body Production 1/24 Mclaren 650S GT3, Lexan .007" (0.175 mm), with paint mask - #0119
Body Production 1/24 Mclaren 650S GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
Neotron stend for dynamic balance all types of slot car armatures. Tolerance till 0,0001 gr.
Stend for dynamic balance all types of slot car armatures.
Tolerance till 0,0001 gr.
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team RED BULL RB16B 2021 Turkish GP 2021, Lexan .007" (0.175 mm) - #0141A
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team RED BULL RB16B 2021 Turkish GP 2021 - #0141A
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body (painted without stickers)
-
JK Hawk 11 extreme performance drag motor - #M11
Hawk 11 Precision Balanced Extreme Performance Motor, FK Sized, recommended for drag use only.
-
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
JK Hawk 12 extreme performance motor dual SKF ballbearing *** COMPUTER BALANCED *** - #M12BB
-
JK Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
JKP Hawk 25 Motor (25,000RPM) *** BALANCED *** (analogue of FALCON 4) - #M25
A close analogue of the motor FALCON 4, which had been removed from manufacturing.
In St. Petersburg it is allowed to use in "Standard" in the "TEAPOT" model class.
Old catalog #JK303025
-
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
JK Direct drive motor for C10 1/32 direct drive chassis - NEW VERSION - #M21
* NEW VERSION * Direct Drive Motor for C10 1/32 Direct Drive Chassis, *** COMPUTER BALANCED ***
Old catalog #JKH-DD
-
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor *** COMPUTER BALANCED *** - #M8
JK Hawk Retro Motor, copper brush tab for better conductivity, Same wind and performance as Falcon 7
Old catalog #JKHR
-
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
JK Hawk 4 Motor, *** COMPUTER BALANCED *** - #M4
Introducing our newest motor, the Hawk™ MB (yes, a Hawk mini-brute).
We received requests from raceways and racers to make a replacement motor so we did. We tried to match the performance as close to the mini-brute as possible and our pre-release testing showed it to be extremely close
Old catalog #JKHMB
-
PARMA 4/40" SET SCREW in rims & gears, BULK 100 psc. - #555BP
Replacement 4/40 allen head set screws for Slot Car Front Wheels, Rear Wheels and Spur Gears.
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 46.09MM DIA. - KZA0062
Reserve rubber transmission belt forTIRE TRUER KZA006 (KZA0061) & HUDY 46.09MM DIA.
-
ZHB Fiberglass sheet, w/out foil, thick. 2 mm, sheet 100*200 mm
ZHB Fiberglass sheet, foil on the one side, thick. 1,5 mm, sheet 100*200 mm
Very high quality fiberglass. It is well spilled with resin and does not separate.
-
WORM JIM SLOT 1- 24 (36)V, 10A Power Supply. 110V or 230V. Weight 360 gr. - (Plastic box!) Size: 150 x 105 x 55 mm.
- Input: 110 - 230 V Output: 1-24(36)V / 10A
- Size: 150 x 105 x 55 mm
- Weight: 360 grams
- Plastic box
- Wireles charger
-
KOLHOZA Formula 1/32 body (ISRA legal 2020-2022) Mercedes W07 Hybrid, thin .005" (0.125 mm) - #0114LT
Formula 1/32 Mercedes W07 Hybrid Body
ISRA legal 2020-2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness, mm: 0,125
-
KOLHOZA Formula 1/32 body (ISRA legal 2020-2022) Mercedes W07 Hybrid, thin .007" (0.175 mm) - #0114L
Formula 1/32 Mercedes W07 Hybrid Body
ISRA legal 2020-2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness, mm: 0,175
-
KOLHOZA FORMULA 1/32 MERCEDES W06 HYBRID BODY, LEXAN, thickness .005" (0.125 mm) - #0112LT
Formula 1/32 Mercedes W06 Hybrid Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
-
KOLHOZA FORMULA 1/32 MERCEDES W06 HYBRID BODY, LEXAN, thickness .007" (0.175 mm) - #0112L
Formula 1/32 Mercedes W06 Hybrid Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
-
NeAn Clear "TEAPOT" 1/24 TOYOTA CELICA TURBO 4WD, PVC, thickness .015" (0.4 mm), w/paint masks - #01-P
"TEAPOT" 1/24 Toyota Celica Turbo 4WD Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MERCEDES BENZ CLK DTM BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #02-L
"TEAPOT" 1/24 Mercedes Benz CLK DTM Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MERCEDES BENZ CLK DTM BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #02-P
"TEAPOT" 1/24 Mercedes Benz CLK DTM Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MERCEDES BENZ 300 SL 1954 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #03-L
"TEAPOT" 1/24 Mercedes Benz 300 SL 1954 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MERCEDES BENZ 300 SL 1954 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #03-P
"TEAPOT" 1/24 Mercedes Benz 300 SL 1954 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 VOLKSWAGEN 1300 HOT ROD BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #04-L
"TEAPOT" 1/24 Volkswagen 1300 Hot Rod Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 VOLKSWAGEN 1300 HOT ROD BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #04-P
"TEAPOT" 1/24 Volkswagen 1300 Hot Rod Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 RENAULT ALPINA 1800 S 1971 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #05-L
"TEAPOT" 1/24 Renault Alpina 1800 S 1971 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 RENAULT ALPINA 1800 S 1971 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #05-P
"TEAPOT" 1/24 Renault Alpina 1800 S 1971 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 CHEVROLET CORVETTE BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #06-L
"TEAPOT" 1/24 Chevrolet Corvette Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 CHEVROLET CORVETTE BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #06-P
"TEAPOT" 1/24 Chevrolet Corvette Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 LANCIA STRATOS 1974 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #07-L
"TEAPOT" 1/24 Lancia Stratos 1974 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 LANCIA STRATOS 1974 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #07-P
"TEAPOT" 1/24 Lancia Stratos 1974 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 BUICK ROADMASTER 1948 HOT ROD BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #08-L
"TEAPOT" 1/24 Buick Roadmaster 1948 Hot Rod Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 BUICK ROADMASTER 1948 HOT ROD BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #08-P
"TEAPOT" 1/24 Buick Roadmaster 1948 Hot Rod Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 DODGE VIPER RT 10 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #09-L
"TEAPOT" 1/24 Dodge Viper RT 10 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 DODGE VIPER RT 10 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #09-P
"TEAPOT" 1/24 Dodge Viper RT 10 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 PORSCHE 911 GT1 1996 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #10-L
"TEAPOT" 1/24 Porsche 911 GT1 1996 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 PORSCHE 911 GT1 1996 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #10-P
"TEAPOT" 1/24 Porsche 911 GT1 1996 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MERCEDES BENZ CLK GTR BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #11-L
"TEAPOT" 1/24 Mercedes Benz CLK GTR Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MERCEDES BENZ CLK GTR BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #11-P
"TEAPOT" 1/24 Mercedes Benz CLK GTR Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 FERRARI 330 P4 1968 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #12-L
"TEAPOT" 1/24 Ferrari 330 P4 1968 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 FERRARI 330 P4 1968 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #12-P
"TEAPOT" 1/24 Ferrari 330 P4 1968 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 FERRARI 550 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #13-L
"TEAPOT" 1/24 Ferrari 550 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
DUBICK Engineering 2020 Open 12 chassis assembled without ballbearings - #122020
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,52lig
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,52ligof
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
DUBICK TECH BLOCK WITH MAGNETS - #DB205
DUBICK TECH BLOCK WITH MAGNETS - #DB205
Textolite tech block for models with fixed samarium-cobalt magnets. It is made with a cut zone of guide and rear wheels. Has an even working plane.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø9.5 mm, ultra light(1,38 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 16
- dia., mm: 9,5
- weight per pair, gr/pair: 1,38
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø9.5 mm, ultra light - #BSV209,52lig
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 9.5 mm;
- Ultra light.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø9.5 mm, ultra light (1,58 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,58
-
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
DUBICK Diamond hone for increase inside tire diameter till 11 mm (0,433")
-
WRIGHT WAY Magnetic tech block - #WWMTB
WRIGHT WAY Magnetic tech block - #WWMTB
Phenolic Block with magnets for holding the car in place.
-
KOFORD BRUSH RADIUS TOOL, Ø5.2 mm - #M270
Brush radius tool for fast break in. The essential tool for maximum motor performance. Now hardened for long life and with improved knurl
-
DenVel electonics Stand for magnets tests - #MT1
Stand for magnets tests. Indispensable in the selection of magnets.
Link to video review: https://www.youtube.com/watch?v=BKBSmt1xII0&fbclid=IwAR1v2R-puybfh6tBgDQ9Ikzc71XbZAT54pEDwZyqWieqYR6AtgYRkHFv_UE
-
DenVel electonics Stand for magnets tests, w/external sensor, v.2 - #MT v2
Magnet tester #MT v2 - a device for measuring the magnetic field strength of magnets.
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 1 m (3 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
PRO SLOT MOTOR SPRINGS- DOUBLE OVERHEAD SpeedFX, 2 coils, pair, - #PSL2013
Speed Fx Motor springs - Double Overhead
-
JK Motor springs M3 & M6 (L&R), 2 coils - #M36G
JK Motor springs M3 & M6 (L&R), 2 coils - #M36G
Old catalog #JK303066
-
DIFALCO Silver Metallic controller handle w/hardware - #DD851
Silver Metallic Lexan controller handle with hardware
-
DIFALCO Gray Metallic controller handle w/hardware - #DD852
Gray Metallic Lexan controller handle with hardware
-
PARMA LOW PROFILE BLADE GRAPHITE GUIDE CUT DOWN - #70223
The Cut Down Blade was designed for high end racing for maximum ride height adjustability. It will lower the front of chassis .030". Material is milled from top of guide around bottom of post. Use with #70235 Spacers to adjust ride height from .010" to .020" if needed.
-
BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435
BSV Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.70 mm - #BSV6435
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm - #G635
Old catalog #JK42351
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, ultra light - #BSV169,5332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø9.5 mm, w/offset of the hub, ultra light - #BSV169,5332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 9.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø9.5 mm, ultra light(1,32 gr/pair)
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 9,5
- weight per pair, gr/pair: 1,32
ON PHOTO RIMS WIDTH 20 MM!!
-
SONIC Replacement tire wrench tip .050", straight - #51-50TR
SONIC Replacement tire wrench tip .050", straight - #51-50TR
Fits most wrench handles. .050" tip fits Euro-Style wheels.
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019, Lexan .007" (0.175 mm) - #0141B
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MERCEDES W10 2019 GERMAN GP 2019 - #0141B
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body (painted without stickers)
-
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
JK Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.53 mm, narrow - #G635N
Old catalog #JK4235F
-
S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564
S&K GEAR 64 PITCH, 35T, 0° angle, 3/32" axle, Ø14.74 mm - #SK3564
-
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
CAHOZA Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.65 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B
CAHOZA Highly Durable Gear 64 pitch, 35T, 0° angle, 3/32" axle, Ø14.62 mm - #6-B
Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant
-
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
JK BRASS PIN TUBING, lenght 10.8 mm, 24 psc. in pocket - #U50-12
Old catalog #JK9171
-
CAHOZA M1 Screw & Insulator, 1 set - #113
CAHOZA M1 Screw & Insulator, 1 set
stainless steel M1 screws, for endbells F1/32 and Sport 32, including insulators
-
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RALPH THORNE Raptor PRO FK ball bearing motor 55K - #RTRRAPTOR
RAPTOR PRO FK MOTOR - DOUBLE BALL BEARING. recommended gearing 13/33 road course / 16/54 drag racing . Approx 55k rpm
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2036
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair
KLINGON Donuts, inside Ø about 9.0 mm, outside Ø 21.5 mm, about 19.5 - 19.9 mm width, pair
Width is about 19.5 mm till 19.9 mm.
You can use this donuts in 1/24 scale if you can mounting them very precision.
-
MID AMERICA Aero Guide flag, cut down, red nylon, unthreaded - #MID130UC
MID AMERICA Aero Guide flag, cut down, red nylon, unthreaded - #MID130UC
-
B52 50,000rpm Mini Motor - #B52-50
B52 50,000rpm Mini Motor
Ball bearing at both ends, 50,000 rpm, super dynamic balance, best in the business bar none, close performance between motors
-
B52 50K ball bearing motor - #B5250KBB
B52 50K ball bearing motor - #B5250KBB
50,000 RPM ball bearing motor
-
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
JK Repleacement tip for L70 wrench, long Reach 4.5" (120 mm) long 2mm Shaft, 0.050" - #L71
Precision Tolerance Allen Tip, Fits L10 and L15 handles
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: yellow - #40212
PARMA Fasglitter yellow
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: orange - #40214
PARMA Fasglitter orange
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: copper - #40215
PARMA Fasglitter copper
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: grape - #40216
PARMA Fasglitter grape
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: red - #40217
PARMA Fasglitter red
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: green - #40218
PARMA Fasglitter green
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: blue - #40220
PARMA Fasglitter blue
This is a vial containing 5.5 grams of Fasglitter.
-
PARMA Paint for polycabonate (Lexan) Fasglitter, colour: lavender - #40221
PARMA Fasglitter lavender
This is a vial containing 5.5 grams of Fasglitter.
-
BSV Gear 64 pitch, 36T, 0° angle, 3/32" axle - #BSV6436
BSV Gear 64 pitch, 36T, 0° angle, 3/32" axle - #BSV6436
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw - #G636
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw - #G636
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42361
-
S&K GEAR 64 PITCH, 32T, 16° angle, 3/32" axle, Ø13.5 mm - #SK3264A
S&K GEAR 64 PITCH, 32T, 16° angle, 3/32" axle, Ø13.5 mm - #SK3264A
-
S&K GEAR 64 PITCH, 33T, 16° angle, 3/32" axle, Ø13.9 mm - #SK3364A
S&K GEAR 64 PITCH, 33T, 16° angle, 3/32" axle, Ø13.9 mm - #SK3364A
-
S&K GEAR 64 PITCH, 34T, 16° angle, 3/32" axle, Ø14.2 mm - #SK3464A
S&K GEAR 64 PITCH, 34T, 16° angle, 3/32" axle, Ø14.2 mm - #SK3464A
-
"Wide one", outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
KLINGON Donuts, inside Ø mm, outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
-
DIFALCO Midnight Black Controller Handle w/Hardware - #DD854
Black Lexan controller handle with hardware
-
DIFALCO Candy Apple Red Controller Handle w/Hardware - #DD855
Candy Apple Red Lexan controller handle with hardware
-
DIFALCO Lemon Drop Metallic controller handle w/hardware - #DD856
DIFALCO Lemon Drop Metallic controller handle w/hardware - #DD856
-
DIFALCO Sky Blue Metallic Controller Handle w/Hardware - #DD857
Sky Blue Metallic Lexan controller handle with hardware
-
DIFALCO Key Lime Pie Metallic controller handle w/hardware - #DD858
DIFALCO Key Lime Pie Metallic controller handle w/hardware - #DD858
-
DIFALCO Sage Green Metallic controller handle w/hardware - #DD859
Sage Green Metallic controller handle w/hardware - #DD859
-
PARMA Turbo Controller Trigger Pin- #355BS
Replacement Turbo Trigger Pin and Screw/Nut.
-
DIFALCO Ballbearing kit w/trigger pin - #DD721
DIFALCO Ballbearing kit w/trigger pin
Ball Bearing Upgrade Kit w/ DD719 Trigger Pin - This kit adds our DD719 trigger pin to the above kit. This upgrade kit is for all brand controllers and our modules who want to upgrade to a ball bearing trigger. This is for Parma,3rd Eye,Ruddock,JG and any brand!
-
KOLHOZA RUBBER TRANSMISSION BELT FOR TIRE TRUER KZA006 (61) 36.98MM DIA. - KZA0062 - KZA0063
Reserve rubber transmission belt for TIRE TRUER KZA006 (KZA0061) & HUDY 36.98MM DIA.
-
KOLHOZA AXLE FOR TIRE TRUERS KZA006 (61) & HUDY 2 MM - KZA0064
Reserve axle 2 mm for TIRE TRUER KZA006 (KZA0061) & HUDY
-
MID AMERICA Replacement tire wrench tip .050", straight, dia. 2 mm - #426JK
MID AMERICA Replacement tire wrench tip .050", straight, dia. 2 mm
Fits for JK, Red Fox, Koford
-
PROSLOT X-12 C-CAN MOTOR W/38 DEGREE ARMATURE- #PS-723 38
Group 12 motor 38 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/42 DEGREE ARMATURE- #PS-723-42
Group 12 motor 42 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
PROSLOT X-12 C-CAN MOTOR W/45 DEGREE ARMATURE- #PS-723-45
Group 12 motor 45 degree, with VIP Can, Mega III Magnets, and on the M Blank
-
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
KOFORD Ultra G12 blueprinted motor with shunts and can ball bearing - #M527B
Lightweight can and .450 long magnets. Motor is blueprinted and assembled by Koford craftsmen with premium brushes and fully broken in.
-
CAHOZA С-Can G12 motor - O - #230
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,2 grammes.
-
CAHOZA C-Can G12 motor - O - bevelled - #230B
Cahoza C-can motor, assembled using:
- "O" type C-can #250,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,2 grammes.
-
REDFOX FORMULA 1/24 BODY, Lexan, thin .007" (0.175mm) - RFSC29C
Formula 1/24 Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175mm)
-
NeAn Clear "TEAPOT" 1/24 FERRARI 550 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #13-P
"TEAPOT" 1/24 Ferrari 550 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 NOBLE M12 GTO BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #14-L
"TEAPOT" 1/24 Noble M12 GTO Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 NOBLE M12 GTO BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #14-P
"TEAPOT" 1/24 Noble M12 GTO Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 ASTON MARTIN DBR 9 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #15-L
"TEAPOT" 1/24 Aston Martin DBR 9 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 ASTON MARTIN DBR 9 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #15-P
"TEAPOT" 1/24 Aston Martin DBR 9 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
CAHOZA PHENOLIC INSULATORS, 1 pc. - #158
PHENOLIC INSULATORS
phenolic insulators, use on all aluminium endbells -
PARMA TURBO NYLON TRIGGER - #355C
Replacement nylon trigger for Turbo Controllers.
-
KOLHOZA EUROSPORT 1/32 AUDI R15 TDI BODY, LEXAN, thickness .007" (0.175 mm) - #656-L
EUROSPORT 1/32 Audi R15 TDI Body
ISRA LEGAL 2015-2020
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA ROMEO С39 2020, Lexan .007" (0.175 mm) - #0141P1
Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA ROMEO С39 2020 - #0141P1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA TAURI AT01 2020, Lexan .007" (0.175 mm) - #0141P2
Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team ALPHA TAURI AT01 2020 - #0141P2
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MCLAREN MCL35 2020, Lexan .007" (0.175 mm) - #0141P3
OLEG Custom Painted Body Formula 1/24 McLaren MCL 35 2020 painted in livery F1 team MCLAREN MCL35 2020 - #0141P3
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan VALVOLINE (painted without stickers), Lexan .007" (0.175 mm) - #0142A
Custom Painted Body Production 1/24 Lamborghini Huracan VALVOLINE
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
MID-AMERICA Replacement tire wrench tip .050", straight, dia. 3 mm - #426
MID-AMERICA Replacement tire wrench tip .050", straight, dia. 3 mm
-
MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417
MID-AMERICA PRO billet tech block w/ 8 guide depths double sided - #MID417
-
OLEG Body Retro 1/24 McLaren M1B, Lexan .010" (0.254 mm) - #0126
Retro 1/24 McLaren M1B body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro 1/24 Lola T310, Lexan .010" (0.254 mm) - #0127
Retro 1/24 Lola T310 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro 1/24 Bizzarrini P538, Lexan .010" (0.254 mm) - #0128
Retro 1/24 Bizzarrini P538 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro Formula 1/24 Surtees TS7, Lexan .010" (0.254 mm) - #0129
Retro Formula 1/24 Surtees TS7 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
OLEG Body Retro 1/24 Citroen CV2, Lexan .007" (0.175 mm) - #0130
Retro 1/24 Citroen CV2 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .007" (0.175 mm)
-
KOLHOZA AXLE FOR TIRE TRUERS KZA006 (61) & HUDY 3/32" (2.36 MM) - KZA0065
Reserve axle 3/32" (2.36 mm) for TIRE TRUER KZA006 (KZA0061) & HUDY
-
TAMIYA RC ESC TBLE-02S brushless - #45057
TAMIYA RC ESC TBLE-02S brushless - #45057
This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings .
-
KV TIRE TRUER 3/32" and 2 mm axles included - #KV1
KV TIRE TRUER
3/32" and 2 mm axles included. 1/8” axle available separate. Plastic box for storage included!! (NeAn #170)
Black anodozed. Construction with two types of sandpaper and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm) -
KV TIRE TRUER with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV4
KV TIRE TRUER with
DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining. Plastic box for storage included!! (NeAn #170)
3/32" and 2 mm axles included black anodozed. Construction with two types of diamond files and two belts. Adjustable needle for removing the external diameter of the donut before accurate grind. Also, this needle can be used to cut the width of the donuts using the holes in the base (16 mm and 20 mm). -
KOLHOZA SOLDER REGULATION 220V - KZA#008
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 220 volt.
-
B52 70K ball bearing motor - #B52-70KBB
B52 70K ball bearing motor - #B52-70KBB
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. 0,5 mm, 24 pcs. - #158
CAHOZA Phenolic insulators, ID 1,5 mm x OD 3 mm x thick. 0,5 mm, 24 pcs. - #158
phenolic insulators, use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,5mm, packed by 24pcs
-
ALPHA FULL APRON - #903
ALP903 -RACING APRONS - full apron, High quality, bright red aprons with the Alpha Logo
-
TAMIYA Masking tape for curves, width 5 mm - #TAM87179
TAMIYA Masking tape for curves, width 5 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape, width 6 mm - #TAM87030
TAMIYA Masking tape, width 6 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft) - #AL510B
ALPHA Lead wire 20Ga (section 0,52 mm²), black, 10 m (30 ft)
It can be used as a lightweight lead wire or spliced onto standard 18-guage wire for weight savings. It has very high temperature silicone insulation and 128 strands of fine copper wire. Suitable for Eurosport racing, Scale racing, and Wing racing. You can save approximately ½ gram by splicing this 20-guage wire to the standard 18-guage wire at the guide. By completely substituting this 20-guage wire for the heavier 18-gauge wire, you can save a gram or more.
-
MID AMERICA Eagle motor - #MID605
MID AMERICA Eagle motor
-
KOLHOZA SOLDER REGULATION 110V - KZA#0081
Temp control for soldering irons. The temp control easly goes inline with the soldering irons cord. Helps reduce the burnt tip of the soldering iron. 110 volt
-
RALPH THORNE Flux Brush, 1 pc. - #RTRFB-1
RALPH THORNE Flux Brush, 1 pc.
1 disposable flux brush with adjustable length handles.
-
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #335
long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: blue nylon, glass fibre, these guides have minimum content of glass fibre for higher elasticity, very precise, high quality material used
-
BPA Clear Body Eurosport 1/24 BMW LMR, Lexan .005" (0.125 mm), with paint mask - #K 021-005
BPA Clear Body Eurosport 1/24 BMW LMR
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
JK Replacement tire & gear wrench tip .050", straight, dia. 3 mm - #L11
Old catalog #JK80421
-
REDFOX Clear body F1 JRL Hallo Ferrari Formula 1/24, Lexan, thin .007" (0.175mm) - #RFSC105C
REDFOX Clear body F1 JRL Hallo Ferrari Formula 1/24
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
TQ Lead wire 20Ga (section 0,52 mm²), black 1 m (3 ft) - #TQ2031
TQ Lead wire 20Ga (section 0,52 mm²), black 1 m (3 ft) - #TQ2031
266 strand bare copper conductor with thin silicone insulation. 1.75mm OD available in Black only. Not the lightest leadwire available but has approx. 75% more copper in the conductor to deliver more current and less loss
-
MID AMERICA Mockingbird motor - #MID604
MID AMERICA Mockingbird motor
-
DUBICK Holder for the armatures & armatures in the tubes
DUBICK Holder for the armatures & armatures in the tubes
-
TQ LEAD WIRE 20Ga (section 0,52 mm²), black, 3 m (10 ft) - #TQ201
10 feets of 20 gauge Black wire
-
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
JK Guide Shoe Nut 9mm socket, Aluminum - #U8
Old catalog #JK3516
-
JK CONTROLLER TRIGGER - #N9
JK CONTROLLER TRIGGER - #N9
Controller trigger, Updated
Old catalog #JK8083
-
DUBICK Traditional flat controller trigger - #726
DUBICK Traditional flat controller trigger - #DB726
Same as Parma finger trigger profile. Suitable for Parma, DiFalco or JK controllers. Has an additional brass tube for spring-loaded moving contact.
-
RED FOX High performance 408 strand braid, (sizes: 5.1 mm x 0.9 mm), 1 pair. - #RFBRAIDHP1
RED FOX High performance 408 strand braid, 1 pair. - #RFBRAIDHP1
sizes: 5.1 mm x 0.9 mm (.200" x .035")
High Performacne 408 strand dimpled braid
-
MID-AMERICA DIAMOND HEAD SET UP KIT W/ BUSHINGS & MAGNETS - #MAR630
Diamond Head C can set up Kit w/ Bushings C Can Set Up Very High Quality Set up kit with Magnets and brush springs
-
KOLHOZA CAR BALANCER - KZA007
With this car balancer you can get your car balanced to perfection. With a front and two rear scales you can adjust your chassis front to back or right to left.
-
DUBICK 4/40" x 1/8" set screws, 1 tube (12 pcs.) - #DB399
DUBICK 4/40" x 1/8" set screws, 1 tube (12 pcs.) - #DB399
Tire and gear size.
-
MID AMERICA Phoenix motor - #MID602
MID AMERICA Phoenix motor
A Hawk size motor with group 12 speed.
-
DUBICK Plastic box 104 х 175 х 22 mm (4.09" x 6.89" x 0.87") w/15 configurable sections - #DB215
DUBICK Plastic box 104 х 175 х 22 mm (4.09" x 6.89" x 0.87") w/15 configurable sections - #DB215
- Material: plastic with transparent cover.
- Dimension, mm (in.): 104 х 175 х 22 mm (4.09" x 6.89" x 0.87").
- Quantity of configurable sections, pcs.: 15.
- Plastic parts box like the DE214 but bigger
-
SLOT FOX Flux brush, 1 pc. - #SF40110
SLOT FOX Flux brush, 1 pc. - #SF40110
-
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
SLOT FOX Flux brush, 1 cd. (10 pcs). - #SF40110
-
KOFORD Flux brush - #M424
At last a flux brush which is the correct size for slot car racing and will hold up to the attack of acid flux.
-
RALPH THORNE Flux Brush, 20 pcs. - #RTRFB-20
RALPH THORNE Flux Brush, 1 pc.
This is a pack of 20 disposable flux brushes with adjustable length handles.
-
RALPH THORNE Water-based airbrush paint for polycabonate (Lexan), colour: OPAQUE PURPLE, bottle 2 oz/60 ml. - #RTR5202
Opaque Purple - 2 ounces Fuel-Proof, Water Based paint. For Painting Slot and R/C Car lexan Bodies. Remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
FULL ANALOGUE OF THE PARMA FASKOLOR PAINTS
-
CAHOZA Low profile long cut down nylon elastic guide, violet, w/out thread - #336
CAHOZA Low profile long cut down nylon elastic guide, blue, w/out thread - #336
ong cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.400" (10.15 mm) - #R3S
JKP Plastic rims #R3S
- For 3/32" axle;
- Width 20 mm;
- Dia. .400" (10.15 mm).
Old catalog #JKR021
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø10.2 mm, ultra light - #BSV2010,22lig
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø10.2 mm, ultra light - #BSV2010,2332lig
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV2010,2332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 10.2 mm;
- W/offset of the hub;
- Ultra light.
-
JK PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.2 mm - #JKR021-I
PARAMETERS
- axle: 3/32" (2,36 mm)
- width, mm: 20
- dia.,mm: 10,2
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.2 mm, ultra light - #BSV1610,22lig
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.2 mm, ultra light - #BSV1610,2332lig
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.2 mm;
- Ultra light.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV1610,2332ligof
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10,2 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
JK PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø10,2 mm - #R2S
JK PLASTIC RIMS #R2S
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 10,2
Old catalog #JKR021-2A
-
S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø10.5 mm, (2,2 gr/pair) - #SK10520S
S&K PLASTIC RIMS, (2,2 gr/pair) - #SK10520S
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 10,5
- weight per pair, gr/pair: 2,2
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.2 mm, w/offset of the hub, ultra light - #BSV1610,22ligof
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10,2 mm;
- W/offset of the hub for ES 1/32 & Production 1/32
- Ultra light.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm, standard (1,83 gr/pair)
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,83
-
B52 Magnesium rims for 2 mm axle, width 20 mm, Ø.393" (10.2 mm), 1.38 g. per pair
B52 Magnesium rims
- For 2 mm axle;
- Width 20 mm;
- Dia. .393" (10.2 mm);
- 1.38 g. per pair
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.5 mm, (2.01 g. per pair) - #BSV1610,5
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.5 mm;
- 2.01 g. per pair.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø10.5 mm, w/offset of the hub, (1.96 g. per pair) - #BSV1610,5of
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 10.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32;
- 1.96 g. per pair.
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,ultraweight (1,57 gr/pair) - #SK10516
PARAMETERS
- axle, mm.: 2,36
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,57
-
S&K PLASTIC RIMS FOR 3/32" axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, ultra light (1,6 gr/pair)
PARAMETERS
- axle, mm: 2,36
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,6
- with offset of hub for ES 1/32 & Production 1/32
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan CASTROL (painted without stickers), Lexan .007" (0.175 mm) - #0142B
Custom Painted Body Production 1/24 Lamborghini Huracan CASTROL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL (painted without stickers), Lexan .007" (0.175 mm) - #0142C
Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL (painted without stickers), Lexan .007" (0.175 mm) - #0142D
Custom Painted Body Production 1/24 Lamborghini Huracan PENNZOIL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #DB212
DUBICK VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 42 х 54 х 6 mm (1.65" x 2.13" x 0.24") - #DB212
Viscose sponge for cleaning soldering iron tip
-
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #DB2121
DUBICK Blue viscose sponge for cleaning soldering iron tip, 65 х 65 х 7 mm (2.55" x 2.55" x 0.28") - #DB2121
-
WRIGHTWAY VISCOSE SPONGE FOR CLEANING SOLDERING IRON TIP, 54 х 68 х 16 mm - #WWSPONG
High quality viscose sponge for cleaning soldering iron tip
-
JK Stock car numbers, orange - #S6
JK Stock car numbers, orange - #S6
Old catalog #JK20031O
-
ZHB SUPER GLUE "MONOLIT"
Good super glue with a dispenser. Suitable for gluing magnets and other works.
-
KOFORD .007" (0.178 MM) THICK, ALUMINUM ARM (2 MM) SPACER, 12 pcs. - #M249
.007" aluminum arm spacers, 1/3 the weight of bronze, brass or steel. Use between bronze spacers so as to provide necessary support, 12 per bag.
-
KOFORD .007" (0,178 MM) THICK, BRONZE ARM (2 MM) SPACER, 12 pcs. - #M265
.007" phosphor bronze spacers, Ultra precision fit on armature shaft to eliminate vibration due to loose fit, phosphor bronze is very hard but will not stick to magnets. 12 per bag.
-
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
SLICK7 Bronze arm spacer .007" (0,178 mm), 10 psc. - #SL7-610
-
CAHOZA ARM (2 mm) SPACER BRONZE .007" (0,18 mm), 24 psc. - #37
PHOSPHOR BRONZE SPACERS 0,18
the same as #36, but thickness is 0,18mm (.007"), packaged 24 per bag -
SLICK7 Be-Cu ARM SPACER .010" (0,254 mm), 10 psc. - SL7611
SL7611 - .010 thick armature spacers made from hard berrilium copper. 10 psc. ber bag.
-
SLICK7 PHENOLIC ARM SPACERS .010" (0,254 mm), 10 psc. - #SL7-108
Phenolic arm. spacer. Phenolic spacer and bearing shield to fit armature shaft snug! O.D. is 3/16" to cover 5 mm motor bearing and is smaller than comm. so as to not interfere with motor brushes!
-
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle with hub adaptor to 3/32", Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
PARMA SLOT SPUR GEAR 48PITCH, 26T, 1/8" axle, (Ø14.84 mm) with hub adaptor 3/32", with screw - #70126
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
DUBICK PINION GEAR 48 PITCH, 8T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-8
DUBICK PINION GEAR 48 PITCH, 8T, 2 mm bore, BRASS
This is press-on style pinion gear
-
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
JK PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #P48S
48 pitch 8 tooth solder on pinion
Old catalog #JK4208
-
SONIC PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL - #3048-08
SONIC PINION GEAR 48 PITCH, 8T , 2 mm bore, STEEL
8 tooth 48 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision
-
ARP Pinion gear 48 pitch, 7T, 13° angle, 2 mm bore, steel - #arp4807a
ARP Pinion gear 48 pitch, 7T, 13° angle, 2 mm bore, steel - #ARP4807A
ARP 7 Tooth Tru-Bevel Pinion Gear, 48 Pitch. Fit by solder.
-
ARP Pinion gear 48 pitch, 7T, 13° angle, 2 mm bore, steel, 1 cd. (6 pc.) - #arp4807a
ARP Pinion gear 48 pitch, 7T, 13° angle, 2 mm bore, steel, 1 cd. (6 pc.) - #ARP4807A
ARP 7 Tooth Tru-Bevel Pinion Gear, 48 Pitch. Fit by solder.
-
CAHOZA GEAR 72 PITCH 41T, 16° angle, 3/32" axle, Ø15.05 mm - #4
CAHOZA GEAR 72 PITCH 41T, 16° angle, 3/32" axle, Ø15.05 mm - #4
-
BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle - #BSV72372
BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle - #BSV72372
-
BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72372led
BSV Gear 72 pitch, 37T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72372led
Suitable for ES 1/32
-
S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm - #SK37722
S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm - #SK37722
available only for special order!
-
S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK37722G
S&K GEAR 72 PITCH, 37T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK37722G
available only for special order!
-
BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle - #BSV72382
BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle - #BSV72382
-
BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72382led
BSV Gear 72 pitch, 38T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72382led
Suitable for ES 1/32
-
S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3772G
S&K GEAR 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3772G
-
S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. - #SK38722
S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. - #SK38722
-
S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK38722G
S&K GEAR 72 PITCH, 38T, 0° angle, 2 mm axle, Ø14.2 mm. For gluing. - #SK38722G
-
VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770
VITULA Gear 72 PITCH, 37T, 0° angle, 3/32" axle, Ø14.8 mm - #SG770
-
BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle - #BSV7238332
BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle - #BSV7238332
-
BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7238332led
BSV Gear 72 pitch, 38T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7238332led
Suitable for ES 1/32
-
S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. - #SK3872
S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. - #SK3872
-
S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3872G
S&K GEAR 72 PITCH, 38T, 0° angle, 3/32" axle, Ø14.2 mm. For gluing. - #SK3872G
-
CAHOZA highly durable gear 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5B
CAHOZA highly durable gear 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm
-
CAHOZA highly durable gear corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5BC
CAHOZA highly durable gear corrected 72 pitch 38 teeth, 0° angle, 3/32" axle, Ø14.52 mm
-
CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#230
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle - #BSV7239332
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle - #BSV7239332
-
HUDY Allen Wrench Replacement Tip .050" x 120 mm - #125040
Type: Allen Replacement Tip - Inch
Tip size: .050"
Tip length: 120mm -
KOFORD 408 BRAID 12 PAIRS in a plastic box - #M660
12 pairs of 408 strand braid in a easy open plastic box
-
SCB braids HIGH SPEED (sizes: 4,90 x 0,65 mm), 5 pair - #HSCU01205
SCB braids HIGH SPEED (sizes: 4,90 x 0,65 mm), 5 pair - #HSCU01205
-
DUBICK 4/40" x 1/8" set screws, bulk pack of 25 pcs. - #DB400
DUBICK 4/40" x 1/8" set screws, bulk pack of 25 pcs. - #DB400
Tire and gear size.
-
DUBICK 4/40" x 1/8" set screws, tube (50 pcs.) - #DB401
DUBICK 4/40" x 1/8" set screws, tube (50 pcs.) - #DB401
Tire and gear size.
-
DUBICK 4/40" x 1/8" set screws, tube (100 pcs.) - #DB402
DUBICK 4/40" x 1/8" set screws, tube (100 pcs.) - #DB402
Tire and gear size.
-
KV Needle for tire truer - #KV8
KV Needle for tire truer - #KV8
-
PROSLOT X-7 PRO horizontal (for F1-32, Х-12, 16 group, Hawk group and other motors) ) motor brushes, 1 pr. - #PS-X7Horizontal
PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7
1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
PROSLOT X-7 PRO vertical (for ES24, ES32 and wing motors) motor brushes, 1 pr. - #PS-X7Vertical
PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7
1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7
PROSLOT X-7 PRO motor brushes, 1 pr. - #PS-X7
1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
PROSLOT X-7 PRO motor brushes, 6 pr. - #PS-X7
PROSLOT X-7 PRO motor brushes, 6 pr. - #PS-X7
6 pairs of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
KOFORD PINION 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #M599-8
8 tooth 64 pitch stainless pinion with boss to help keep solder out of teeth.
-
SONIC PINION GEAR 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #30-08
SONIC PINION GEAR 64 PITCH, 8T, 0° ANGLE, , 2 mm bore - #30-08
8 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision.
-
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw, narrow - #G636N
JK GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw, narrow - #G636N
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4236F
-
S&K GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.74 mm
S&K GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø14.74 mm
-
S&K GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm - #SK3664
S&K GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm - #SK3664
-
CAHOZA Gear 64 pitch, 36T, 0° angle, 3/32" axle, Ø15.02 mm - #6
CAHOZA Gear 64 pitch, 36T, 0° angle, 3/32" axle, Ø15.02 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
PROSLOT GEAR 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.05 mm, w/screw- #680-36
36t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
PROSLOT GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.39 mm, w/screw- #680-37
37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA - CAH#6-AG
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
BPA Clear Body ES G12-24 Lola GB, Lexan .007" (0.175 mm), with paint mask - #K 049-007
Clear Body ES G12-24 Lola GB
- Made from: Polycarbonate (Lexan)
- For: ES G12-24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear body G12-24 outlaw Porsche, lexan, thickness .005" (0.125 mm) - #K 055-005
BPA Clear body G12-24 outlaw Porsche
- Made from: Polycarbonate (Lexan)
- For: G12-24 outlaw
- Thickness: .005" (0.125 mm)
- Clear body w/paint mask.
-
BPA Clear body G12-24 outlaw Porsche, lexan, thickness .007" (0.175 mm) - #K 055-007
BPA Clear body G12-24 outlaw Porsche
- Made from: Polycarbonate (Lexan)
- For: G12-24 outlaw
- Thickness: .007" (0.175 mm)
- Clear body w/paint mask.
-
BPA Clear body G12 LOLA LM EVO, lexan, thickness .005" (0.125 mm) - #K 091-005
Clear body G12 LOLA LM EVO
- Made from: Polycarbonate (Lexan)
- For: G12
- Thickness: .005" (0.125 mm)
- Clear body.
-
BPA Clear body G12 LOLA LM EVO, lexan, thickness .007" (0.175 mm) - #K 091-007
Clear body G12 LOLA LM EVO
- Made from: Polycarbonate (Lexan)
- For: G12
- Thickness: .007" (0.175 mm)
- Clear body.
-
DELTA PLASTIC Clear Body Open 12 Lola, Lexan .005" (0.125 mm) - #DP25408-5
Clear Body Open 12 Lola
New bodies from Italy!
- Made from: Polycarbonate (Lexan)
- For: Open 12
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body Eurosport 1/24 BMW LMR, Lexan .007" (0.175 mm), with paint mask - #K 021-007
BPA Clear Body Eurosport 1/24 BMW LMR
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear Body Eurosport 1/24 BMW LM, Lexan .005" (0.125 mm), with paint mask - #BPA-K035-005
BPA Clear Body Eurosport 1/24 BMW LM
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
BPA Clear Body Eurosport 1/24 BMW LM, Lexan .007" (0.175 mm), with paint mask - #BPA-K035-007
BPA Clear Body Eurosport 1/24 BMW LM
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
DUBICK Set of contacts for the controller. Made from brass and GOLD PLATED - #714
DUBICK set of contacts for the controller. Made from brass and GOLD PLATED.
Fit for Parma, Jk and RedFox controller triggers. Full analog Parma #355D TURBO CONTACTS & TERMINALS and fit for Parma turbo controller frame.
-
ZHB LEAD WIRE RETAINER, 1 pc.
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
KOFORD .005" (0.13 MM) TEFLON GUIDE WASHER, 6 pcs. - #M322
.005 Teflon® guide washer. Use to reduce friction between guide and chassis. Where guide height adjustments are required, use #M321. Packaged 6 per bag.
-
DUBICK .01" (0.25 mm) Precision steel guide spacers, 6 pcs. - #DB709
DUBICK .01" (0.25 mm) Precision steel guide spacers, 6 pcs.
-
TAYLO RACING "DRIPS" RC paint mask - #026RC
TAYLO RACING "DRIPS" RC paint mask - #026RC
-
TAYLO RACING "GRAPHICS" RC paint mask - #027RC
TAYLO RACING "GRAPHICS" RC paint mask - #027RC
-
TAYLO RACING "FLAME" RC paint mask - #028RC
TAYLO RACING "FLAME" RC paint mask - #028RC
-
TAYLO RACING "FLAME" RC paint mask - #029RC
TAYLO RACING "FLAME" RC paint mask - #029RC
-
TAYLO RACING "GRAPHICS" RC paint mask - #030RC
TAYLO RACING "GRAPHICS" RC paint mask - #030RC
-
TAYLO RACING "GRAPHICS" RC paint mask - #031RC
TAYLO RACING "GRAPHICS" RC paint mask - #031RC
-
TAYLO RACING "FLAME" RC paint mask - #032RC
TAYLO RACING "FLAME" RC paint mask - #032RC
-
TAYLO RACING "GRAPHICS" RC paint mask - #033RC
TAYLO RACING "GRAPHICS" RC paint mask - #033RC
-
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
DUBICK Precut Brass pin tubes, length 11.8 mm, 4 pcs.- #DB4081
-
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
DUBICK Precut Brass pin tubes, length 11.8 mm, storage tube (24 pcs.) - #DB409
-
CAHOZA Low profile long cut down nylon elastic guide, colorless, w/out thread - #337
CAHOZA Low profile long cut down nylon elastic guide, colorless, w/out thread - #337
long cut down guide for integral guide tongue chassis, lenght 26.8 mm, special shape of keel (see picture), content: colorless nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used, ideal for wing classes
-
TWP C-Can setup - #TWPKMB-012
TWP C-Can setup - #TWPKMB-012
Full setup kit for G12 (C-Can group) motor.
-
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
JK 3/32" (2.36 mm), .010" (0.254 mm) thick, stainless steel axle spacers, pack of 100 pcs. - #U72-100
-
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
KOFORD Ø.536" (13.61 mm) BEARING ASSEMBLY TOOL (for motor)- KOF188-536
SPECIAL ORDER!
-
HUDY Allen Wrench Replacement Tip .050" x 30 mm - #125011
Type: Allen Replacement Tip - Inch
Tip size: .050"
Tip length: 30mm -
DenVel Multitool v.2: measure magnets magnetic field & rotor resistance
DenVel Multitool v.2: measure magnets magnetic field & rotor resistance
-
JK Stock car numbers, red - #S7
JK Stock car numbers, red - #S7
Old catalog #JK20031R
-
DUBICK Tweezers stainless steel, non-magnetic - #DB715
DUBICK Tweezers stainless steel, non-magnetic - #DB715
Perfect for work with small parts!
-
TAMIYA ANGLED TWEEZERS - #TAM74003
Special order!
These angled tweezers are useful for handling small parts and adding decals to your models. The edges are rounded to prevent scratching. Made from stainless steel with a black cationic finish for long life.
-
MID AMERICA Enforcer 60,000 rpm motor - #MID609
MID AMERICA Enforcer 60,000 rpm motor - #MID609
-
CAHOZA G12 C-Can setup type UL - bevelled - #242-ULB
Cahoza C-can setup, assembled using:
- Cahoza C-can #252,
- Cahoza Tornado 5 bevelled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Cahoza screws,
- for .518" armatures, Koford ones are recommended,
- professionaly assembled,
- weight 10.8 grammes
-
ZHB Organizer universal 280 х 190 х 30 mm (11.02" x 7.48" x 1.18"), with 40 configurable compartments, grey, w/transparent cover, plastic
ZHB Organizer universal
- Material: plastic with transparent cover.
- Dimension, mm (in.): 280 х 190 х 30 mm (11.02" x 7.48" x 1.18").
- Quantity of configurable sections, pcs.: 40.
- Dimension of section, mm (in.): 33 x 33 (1.29" x 1.29").
- Conveniently customizable sections specifically for your needs!
- Secure locks prevent unwanted opening of the organizer.
-
KOFORD LIGHT TIRE TRACTION, bottle - #M384
Light tire traction
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
JK Precision guide nut wrench for JK#U61 nut - #L30
JK Precision guide nut wrench for JK#U61 nut - #L30
-
SLICK7 LEAD WIRE 20Ga (section 0,52 mm²), yellow, 35 cm - #S7-213 - 35
GOLDEN SILICON WIRE 35 cm
-
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
MID AMERICA Phoenix Supra 75,000 rpm motor - #MID610
-
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
MS-SLOTPARTS Armature timing gauge (ext. version) (special order)
This gauge is used to accurately measure the timing of slot car motor armatures.
-
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
DUBICK TECH BLOCK WITHOUT MAGNETS - #DB2051
-
DUBICK gold plated long guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair - #DB702
DUBICK gold plated long guide clips. Made special for new RED FOX guides. (But also fit for all other guides), 1 pair
-
KOFORD 3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc. - #M704
3/32" (2.36 mm) .010" (0,254 mm) thick, plastic axle spacer, 1 pc.
-
KOFORD 3/32" (2.36 MM) .010 (0.26 MM) THICK PHOS BRONZE AXLE SPACER, 12 psc. - #M296
.010 thick 3/32 Phos Bronze axle spacers. Very hard but will not stick to magnets. 12 per bag.
-
BSV CROWN GEAR 72 pitch, 30 teeth, 2 mm axle, black - #BSVF72302
BSV CROWN GEAR 72 pitch, 30 teeth, 2 mm axle, black - #BSVF72302
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 1 pc. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
CAHOZA Phenolic insulators, ID 1,5 mm, OD 3 mm, thick. .012" (0,3 mm), 24 pcs. - #159
use on all aluminium endbells, suitable for anodised spring posts #154, #157, inside diameter 1,5mm, outside diameter 3mm, thickness 0,3mm, packed by 24pcs
-
TWP EDM rear axle alignment tool - #TWP521
TWP EDM rear axle alignment tool - #TWP521
New Rear axle alignment with 9 height options. Cut to erosion with CNC wire. Extremely precise with 0.005 mm tolerance. For gears between 32 teeth up to 40 teeth with holes for 3/32 shafts. The 90 mm long shaft is not included.
-
MID AMERICA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #MID550
MID AMERICA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #MID550
-
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
JK Ø3/32" (2.36 mm) rear axle, length 2.175" (55 mm) - #A1
Solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
Old catalog #JK5501
-
CAHOZA Ø3/32" (2.36 mm) AXLE (length 53.1 mm) - #23
SOLID AXLE 3/32
solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing -
PROSLOT X-7 B PRO motor brushes, 50 prs. - #PS-X7B
PROSLOT X-7 B PRO motor brushes, 1 pr. - #PS-X7B
1 pair of X7 motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
KOFORD Drag glue regular, bottle - #M452
KOFORD Drag glue regular - #M452
Drag Glue. Blow away the competition! Tests show our glue results in better ET’s than existing technology!
-
OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .005” (0.125 mm) - #OLG0118T
Eurosport 1/24 Audi R15 LMP DTI body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0,125 mm)
-
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair - #DB703
DUBICK gold plated guide clips with crimping for wires. Made for new RED FOX guides.(Fit for all other guides), 1 pair
-
OLEG Clear Body Retro 1/24 Buick Riviera 1969 4,5", Lexan .015" (0.381 mm) - #0132
Clear Body Retro 1/24 Buick Riviera 1969 4,5"
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Brabham BT26 1969, Lexan .010" (0.254 mm) - #0133
Clear Body Retro Formula 1/24 Brabham BT26 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 AAR Indy Eagle 1968, Lexan .010" (0.254 mm) - #0134
Clear Body Retro Formula 1/24 AAR Indy Eagle 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967, Lexan .010" (0.254 mm) - #0135
Clear Body Retro 1/24 Can-Am Shelby T 10 King Cobra 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Healey SR Coventry Climax 1968, Lexan .010" (0.254 mm) - #0136
Clear Body Retro 1/24 Healey SR Coventry Climax 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Elfin T400, Lexan .010" (0.254 mm) - #0137
Clear Body Retro 1/24 Elfin T400
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 McLaren M12 Can-Am 1969, Lexan .010" (0.254 mm) - #0138
Clear Body Retro 1/24 McLaren M12 Can-Am 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Buick Gran Sport 1967, Lexan .015" (0.381 mm) - #0139
Clear Body Retro 1/24 Buick Gran Sport 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.381 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Dodge Dart 1968, Lexan .010" (0.254 mm) - #0140
Clear Body Retro 1/24 Dodge Dart 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Tyrrell 001 1970, Lexan .010" (0.254 mm) - #0143
Clear Body Retro Formula 1/24 Tyrrell 001 1970
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro Formula 1/24 Matra MS120 1970, Lexan .010" (0.254 mm) - #0144
Clear Body Retro Formula 1/24 Matra MS120 1970
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Clear Body Retro 1/24 Chevrolet Monza 1975, Lexan .010" (0.254 mm) - #0147
Clear Body Retro 1/24 Chevrolet Monza 1975
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Body Retro Formula 1/24 Williams FW05, Lexan .010" (0.254 mm)
Retro Formula 1/24 Williams FW05 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
-
NeAn Clear "TEAPOT" 1/24 Chevrolet Corvette Coupe 1960 body, Lexan, thickness .015" (0.375 mm), w/paint masks - #30-L-15
Clear "TEAPOT" 1/24 Chevrolet Corvette Coupe 1960 body
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .015" (0.375 mm)
- Clear body, with paint mask
-
NeAn Clear body Retro Formula 1/24 BRM H16 1967, Lexan .010" (0.254 mm) - #110-L
Clear body Retro Formula 1/24 BRM H16 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Body Production 1/24 Mclaren 650S GT3, Lexan .005" (0.125 mm), with paint mask - #0119T
Body Production 1/24 Mclaren 650S GT3
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan RED BULL (painted without stickers), Lexan .007" (0.175 mm) - #0142E
Custom Painted Body Production 1/24 Lamborghini Huracan RED BULL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Body 1/24 Chevrolet Pick-Up (1951) thin .007” (0.175 mm), with paint mask - #0120
Body 1/24 Chevrolet Pick-Up (1951)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007” (0.175 mm)
-
OLEG Body Production1/24 AUDI RS5 DTM thin .005” (0.125 mm), with paint mask - #0121T
Production 1/24 Audi body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
- with paint mask
-
OLEG Body Production1/24 AUDI RS5 DTM thin .007” (0.175 mm), with paint mask - #0121
Production 1/24 Audi body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,175
- with paint mask
-
S&K GEAR 64 PITCH, 35T, 16° angle, 3/32" axle, Ø14.6 mm - #SK3564A
S&K GEAR 64 PITCH, 35T, 16° angle, 3/32" axle, Ø14.6 mm - #SK3564A
-
BSV Gear 64 pitch, 36T, 16° angle, 3/32" axle, Ø15.04 mm
BSV Gear 64 pitch, 36T, 16° angle, 3/32" axle, Ø15.04 mm
-
CAHOZA GEAR 64 PITCH, 36T, 15° angle, 3/32" axle, Ø14.95 mm - #11-S
CAHOZA GEAR 64 PITCH, 36T, 15° angle, 3/32" axle, Ø14.95 mm - #11-S
-
S&K GEAR 64 PITCH, 36T, 16° angle, 3/32" axle, Ø15.1 mm - #SK3664A
S&K GEAR 64 PITCH, 36T, 16° angle, 3/32" axle, Ø15.1 mm - #SK3664A
-
ZHB FRONT RUBBER TIRES, pair
FRONT RUBBER TIRES for production 1/32 & 1/24. (Best with front carbon axle)
-
MID AMERICA Phoenix motor double ball bearing - #MID602BB
MID AMERICA Phoenix motor double ball bearing
Phoenix Motor w/ Ball Bearings Details: Do not break in on a power supply
-
DOSLOT Donuts inside Ø 9.1 mm (.358"), outside Ø 20 mm (.787"), about 24.6 mm (.968") width, pair
DOSLOT Donuts, pair
inside Ø 9.1 mm (.358"),
outside Ø 20 mm (.787"),
about 24.6 mm (.968") width.
-
OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .007” (0.175 mm) - #OLG0118
Eurosport 1/24 Audi R15 LMP DTI body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0,175 mm)
-
KOLHOZA Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body, Lexan thin .005” (0.125 mm), with paint mask - #0118T
Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0,125 mm);
- Clear body, with paint mask.
-
MS-SLOTPARTS Static balancer tool for balancing the hubs and gears of slot cars. Includes 3/32 " & 2 mm axles and storage box.
Static balancer tool for balancing the hubs and gears of slot cars.
Includes 3/32 " & 2 mm axles and storage box.
-
HENKEL Super glue Moment Maxi, tube 20 g.
Super Moment Maxi perfectly glues a wide range of materials. It is a fast, reliable and durable transparent all-purpose instant adhesive in a large package.
Benefits:
Universal
Water resistant
Heat-resistant (from -40С to + 70С)
Transparent
Large volume -
KOFORD EPOXY HIGH TEMP MAGNET ADHESIVE, one-component - #M345
High temperature epoxy magnet adhesive. Single component advanced structural adhesive especially formulated for gluing slot car magnets. Has superior impact strength and high temperature capabilities compared to commonly available magnet adhesives. Oven cure.
-
DUBICK 0- 15V, 17A Power Supply. 110V or 220V. Weight 750 gr. Dimensions: 122 x 70 x 208 mm.
We are happy present our new Power Supply!
It is two power supply in one!
- In the kit there is an additional block adapter on 10 Volts and 10 Amperes, for simultaneous work with several engines or tools
- ability to accurately adjust the current and voltage.
- The range of voltage adjustment is from 0 to 15 Volts and current from 0 to 17 Amps.
- Accuracy of adjustment to 0.01 both voltage and current.
- Ability to work from 110 and 220 Volts.
- The unit can be controlled via Bluetooth.
- There is also a USB Charger with a maximum current of up to 3 Amps.
- Connection of a soldering iron is possible (possible order extra solder iron like on picture)
- Crocodile wires are included.
- The weight of the entire set of 960 grams.
- Dimensions: 122 x 70 x 208 mm. -
PARMA CLEAR LEXAN CONTROLLER HANDLE - #360
Replacement controller handle for all PARMA Controllers. Direct fit for Economy and Sebring controllers. Can be used for Turbo, Plus and Turbo Qualifier with modifications (top must be cut as original handle).
-
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
PRO-TRACK Clear anodized aluminum Tech Block w/guide depths .010" .015" .020" .025" - #PRO620
-
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
KV Rubber transmission belt for tire truer, dia. 42,5 mm (1,673") - #KV12
Fit for S&K tire truer.
-
CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339
CAHOZA Low profile long cut down nylon elastic guide, straight keel, violet, w/out thread - #339
Upgraded version of long cut down guide (#336) for integral guide tongue chassis, lenght 26.8 mm, straight keel (see picture), content: violet nylon, glass fibre, these guides have higher content of glass fibre, they are more tough, very precise, high quality material used
-
TAMIYA Masking tape, width 10 mm - #TAM87031
TAMIYA Masking tape, width 10 mm
- It even adheres well to uneven surfaces, but is easy to remove.
- Has enough elasticity to work well on curves and small edges.
- Paint does not bleed though the tape.
Comes in its own dispenser with cutter to avoid rough edges.
-
TAMIYA Masking tape for curves, width 12 mm - #TAM87184
TAMIYA Masking tape for curves, width 12 mm
Length of roll: 20m
A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
Use of narrower tape is recommended for sharper curves. -
TAMIYA Masking tape refill, width 18 mm - #87035
TAMIYA Masking tape refill, width 18 mm - #87035
-
TAMIYA Masking tape, width 40 mm - #87063
TAMIYA Masking tape, width 40 mm - #87063
Tamiya Masking Tape is thin, very strong adhesive tape for modelling use.
-
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
MID-AMERICA Guide nut pin driver tool - for pin drive guide nuts - #MID138
Perfect for #MID138B, #MID138R
-
GRW 2 х 5 х 2,3 mm flanged shielded ballbearings, 7 balls, pair - #SSF682-ZZ
2 х 5 х 2,3 mm flanged shielded ballbearings, 7 balls, pair
High quality, german flanged ballbearings
-
KV Upgrade kit for KV tire truer - diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining - #KV5
KV upgrade kit for tire truer with DUBICK Engineering diamond files for rough 60 grit (grain diametr 0,250 mm) & finish 120 grit (grain diametr 0,125 mm) machining
-
CAHOZA LIGHT PROFILE ENDBELLS - #257
New polymer light profile endbells for Cahoza C-can, available in 4 colors, weight only 0,7 grams
-
ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382
ATTAN Gear 72 pitch 38 teeth, 0° angle, 2 mm axle, Ø14 mm - #ATT72382
-
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a short hub, for gluing - #BSV7239332led
Suitable for ES 1/32
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan BWT (painted without stickers), Lexan .007" (0.175 mm) - #0142F
Custom Painted Body Production 1/24 Lamborghini Huracan BWT
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan PETRONAS (painted without stickers), Lexan .007" (0.175 mm) - #0142G
Custom Painted Body Production 1/24 Lamborghini Huracan PETRONAS
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan DHL (painted without stickers), Lexan .007" (0.175 mm) - #0142H
Custom Painted Body Production 1/24 Lamborghini Huracan DHL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan MONSTER ENERGY (painted without stickers), Lexan .007" (0.175 mm) - #0142I
Custom Painted Body Production 1/24 Lamborghini Huracan MONSTER ENERGY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan MARTINI (painted without stickers), Lexan .007" (0.175 mm) - #0142J
Custom Painted Body Production 1/24 Lamborghini Huracan MARTINI
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan REPSOL (painted without stickers), Lexan .007" (0.175 mm) - #0142L
Custom Painted Body Production 1/24 Lamborghini Huracan REPSOL
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Lamborghini Huracan SANTANDER (painted without stickers), Lexan .007" (0.175 mm) - #0142K
Custom Painted Body Production 1/24 Lamborghini Huracan SANTANDER
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Retro Formula 1/24 Tyrrell 001 1970 (painted without stickers), Lexan .010" (0.254 mm) - #0143P1
Custom Painted Body Retro Formula 1/24 Tyrrell 001 1970 (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .010" (0.254 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Retro Formula 1/24 Matra MS120 1970 (painted without stickers), Lexan .010" (0.254 mm) - #0144P1
Custom Painted Body Retro Formula 1/24 Matra MS120 1970 (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .010" (0.254 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SANTANDER (painted without stickers), Lexan .007" (0.175 mm) - #0145A
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SANTANDER (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO FINA (painted without stickers), Lexan .007" (0.175 mm) - #0145B
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO FINA (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SHELL (painted without stickers), Lexan .007" (0.175 mm) - #0145C
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO SHELL (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO ALITALIA (painted without stickers), Lexan .007" (0.175 mm) - #0145D
Custom Painted Body Production 1/24 Ferrari 488 GT3 EVO ALITALIA (painted without stickers)
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Custom Painted Body (painted without stickers)
-
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Black, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #01455Black
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Black
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Custom Painted Body
-
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Blue, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #01455Blue
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Blue
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Custom Painted Body
-
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Green, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #01455Green
OLEG Custom Painted 1/24 NASCAR Pick Up for 4" chassis Green
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Custom Painted Body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Alpine A522 2022, Lexan .007" (0.175 mm) - #0146A
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Alpine A522 2022
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Force India VJM02 2009, Lexan .007" (0.175 mm) - #0146B
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Force India VJM02 2009
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Honda RA106 2006, Lexan .007" (0.175 mm) - #0146C
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Honda RA106 2006
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Renault R 30 2010, Lexan .007" (0.175 mm) - #0146D
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Renault R 30 2010
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Red Bull RB16B 2021 Turkish GP 2021, Lexan .007" (0.175 mm) - #0146E
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Red Bull RB16B 2021 Turkish GP 2021
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Mercedes, Lexan .007" (0.175 mm) - #0146F
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Mercedes
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Ferrari, Lexan .007" (0.175 mm) - #0146J
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Ferrari
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Jaguar, Lexan .007" (0.175 mm) - #0146I
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team Jaguar
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team McLaren, Lexan .007" (0.175 mm) - #0146H
Custom Painted Body Formula 1/24 Alpine A522 2022 painted in livery F1 team McLaren
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175 mm)
- Custom painted body
-
OLEG Custom painted body Retro Formula 1/24 Brabham BT34 1975 BARDAHL, Lexan .01" (0.25 mm) - #0148P1
Custom painted body Retro Formula 1/24 Brabham BT34 1975 BARDAHL
- Made from: Polycarbonate (Lexan)
- For: Retro Formula 1/24
- Thickness: .01" (0.25 mm)
- Custom painted body
-
KOLHOZA F 1/32 SUPER AGURI SA 07 2007 CUSTOM PAINTED BODY - KZA#2004
F 1/32 Super Aguri SA 07 2007 CUSTOM PAINTED BODY
- ISRA legal 2017-2019 "Mercedes W07 Hybrid"
- Made from LEXAN thickness .005"
- Really light body without any stickers, only painting
-
BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426
BSV Gear 72 pitch, 42T, 6° angle, 3/32" axle, Ø15.0 mm - #BSV72426
-
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
KOFORD Matched .450" long x .150" thick C-Can magnets with new (stronger) orientation, pair - #M606
Precision matched. Recommended for wing racing.
-
YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM
YRE Pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM
Manufactured on the Japan EDM machine AMADA. High quality swiss steel.
-
ARP PINION 80 PITCH 6T, 0° angle,1.5 mm bore- #ARP8006
Very good alternative for HORKY pinions. One hundred percent ratio of price/quality
More smaller wear resistance, but enought soft work of gear
-
MID AMERICA Cheap tire & gear wrench - #MID432
MID AMERICA Cheap tire & gear wrench - #MID432
-
KOALA CLAWS Tire traction additive
KOALA CLAWS
The ultimate tire traction additive! Used by Champions! Super thin and does not hold the car back but provides great grip throughout the race. Just massage into tyres before the race. Suitable for Sponge and solid rubber scale tyres.
-
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans) - #PS711
PROSLOT Endbell with oilite bushing for PROSLOT C-CANS, (w/out brush hoods & cans)
-
ARP Pinion gear 48 pitch, 8T, 2 mm bore, steel - #arp4808s
ARP Pinion gear 48 pitch, 8T, 2 mm bore, steel - #arp4808s
48 pitch Straight stainless steel 8 tooth pinion gears
-
DUBICK Desktop organizer for working with small parts 3" x 4 1/2" x .4" (76,2 × 115 × 10 mm). Has a built-in magnet - #DB704
DUBICK Desktop organizer for working with small parts 3" x 4 1/2" x .4" (76,2 × 115 × 10 mm). Has a built-in magnet - #DB704
-
ARP Pinion 64 pitch, 8T, 0° angle, 2 mm bore, stainless steel - #ARP6408
ARP Pinion 64 pitch, 8T, 0° angle, 2 mm bore, stainless steel - #ARP6408
64 pitch stainless steel 8 tooth pinion gear heat treated to 36-38 hardness
-
PROSLOT SpeedFX S16D BALANCED MOTOR - #PS 2001
Universal motor with a wide range of uses and wide possibilities of upgrades.
It is used, as in the simplest models of "Teapot", and in models of trucks. Depending on the ratio and the installed optional armature, the Production class 1/24 is also suitable.
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 4 psc. - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
OLEG Body Production 1/24 Subaru BRZ, Lexan .005" (0.125 mm), with paint mask - #0122T
Production 1/24 Subaru BRZ body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- with paint mask
-
S&K Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree. - #SKAX12-CUSTOM
S&K Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree.
Avialable for special order
-
OLEG Body Production 1/24 Subaru BRZ, Lexan .007" (0.175 mm), with paint mask - #0122
Production 1/24 Subaru BRZ body
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- with paint mask
-
KV 1/8" (3.15 mm) axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV2
KV 1/8" (3.15 mm) axle for tire truer - #KV2
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019, Lexan .005" (0.125 mm), with paint mask - #0131T
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
KV black 1/8" (3.15 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV11
KV black 1/8" (3.15 mm) long axle for tire truer - #KV11
For true 1/8 tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 3/32" (2.36 mm) long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV10
KV black 3/32" (2.36 mm) long axle for tire truer - #KV10
For true 3/32" tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV 2 mm axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV6
KV 2 mm axle for tire truer - #KV6
For true 2 mm tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
KV black 2 mm long axle for tire truer (KV, S&K, BSV, Kolhoza, Hudy) - #KV9
KV black 2 mm long axle for tire truer - #KV9
For true 2 mm tires on KV tire truer. Fit for S&K, BSV, Kolhoza & Hudy tire truer also.
-
MS-SLOTPARTS Balancing axle, dia. 3 mm
MS-SLOTPARTS Balancing axle, dia. 3 mm
In stock
-
MS-SLOTPARTS Balancing axle, dia. 2 mm
MS-SLOTPARTS Balancing axle, dia. 2 mm
-
KOFORD Ø4/40" SCREW IN RIMS & GEARS, PERFORATED, 12 pcs. - #621
Gold billet machined hollow set screws (not rolled like standard set screws). Increased tightening cycles over standard set screws. (bag of 12)
-
ALPHA CUP POINT SCREWS Ø4/40" (Through-hole) IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #885
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
-
ALPHA CUP POINT SCREWS Ø4/40" (Through-hole) IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #885
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #886
-
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 1 pc. - #321
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 1 pc. - #321
use for attaching tires and gears to axle, length only 3/32", for .050" imbus tip
-
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 24 pcs. - #321
CAHOZA Screw 4/40" in rims & gears, .050" hex setscrews, 24 pcs. - #321
use for attaching tires and gears to axle, length only 3/32", for .050" imbus tip
-
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 1 pc. - #320
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 1 pc. - #320
use for attaching tires and gears to axle, length 3/32", for .050" imbus tip
-
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 24 pcs. - #320
CAHOZA Screw 4/40" hollow in rims & gears, .050" hex setscrews, 24 pcs. - #320
use for attaching tires and gears to axle, length 3/32", for .050" imbus tip, packed 24 pcs per bag
-
CAHOZA Motor 12V - 40,000 rpm - #282
CAHOZA Motor 12V - 40,000 rpm - #282
new short can motor 12V-40,000 rpm, 320 g/cm. Armature is axially aligned to the magnetic field for the best performance and axial play between oilites is from .004" to .008". Shaft dia is 2mm.
-
TWP 70KBB Motor - #TWP70KBB
TWP 70KBB Motor - #TWP70KBB
-
NeAn Clear "TEAPOT" 1/24 RENAULT MEGANE TROPHY BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #16-L
"TEAPOT" 1/24 Renault Megane Trophy Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 RENAULT MEGANE TROPHY BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #16-P
"TEAPOT" 1/24 Renault Megane Trophy Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 LOTUS ELISE BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #17-L
"TEAPOT" 1/24 Lotus Elise Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 LOTUS ELISE BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #17-P
"TEAPOT" 1/24 Lotus Elise Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 ALFA ROMEO 8C BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #18-L
"TEAPOT" 1/24 Alfa Romeo 8c Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 ALFA ROMEO 8C BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #18-P
"TEAPOT" 1/24 Alfa Romeo 8c Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
REDFOX Clear Scale Body INDY CAR Formula 1/24, Lexan, thin .007" (0.175mm) - #RFSC35C
REDFOX Clear Scale Body INDY CAR Formula 1/24, Lexan
- Made from: Polycarbonate (Lexan)
- For: Formula/INDY 1/24
- Thickness: .007" (0.175mm)
- Clear body
-
NeAn Clear "TEAPOT" 1/24 SPANO GTA BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #19-L
"TEAPOT" 1/24 SPANO GTA Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask.
-
NeAn Clear "TEAPOT" 1/24 SPANO GTA BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #19-P
"TEAPOT" 1/24 SPANO GTA Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MARUSSIA B2 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #20-L
"TEAPOT" 1/24 Marussia B2 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MARUSSIA B2 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #20-P
"TEAPOT" 1/24 Marussia B2 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MCLAREN P1 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #21-L
"TEAPOT" 1/24 McLaren P1 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 MCLAREN P1 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #21-P
"TEAPOT" 1/24 McLaren P1 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 GAZ-21 "VOLGA" BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #22-L
"TEAPOT" 1/24 GAZ-21 Volga Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
HUDY Allen wrench .050" (4/40) and guide nut tool 9.0 mm - #125090
Type: Allen Wrench - Inch + Nut Tool
Series: Ultimate Professional R/C Tools
Tip size: .050"
Tip length: 30mm
Nut size: 9.0mm
Special tool for Slot cars -
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #DB213
DUBICK DIAMOND COMMUTATOR CUTTING TOOL for arms with cup - #DB213
-
MID AMERICA 3/32" (2.36 mm), .010" (0.254 mm) thick, bronze axle spacers, 8 pcs. - #MID505
MID AMERICA 3/32" (2.36 mm), .010" (0.254 mm) thick, bronze axle spacers, 8 pcs. - #MID505
-
OLEG Body Eurosport 1/24U Acura ARX-05 DPi IMSA, thin .005” (0.125 mm), with paint mask - #0123T
Eurosport 1/24U Acura ARX-05 DPi IMSA body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24U
- Thickness: .005" (0,125 mm)
- with paint mask
-
NeAn Clear "TEAPOT" 1/24 GAZ-21 "VOLGA" BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #22-P
"TEAPOT" 1/24 GAZ-21 Volga Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body, Lexan, thickness .01" (0.25 mm), w/paint masks - #23-L
Clear "TEAPOT" 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body, PVC, thickness .015" (0.4 mm), w/paint masks - #23-P
"TEAPOT" 1/24 Ford Model B 1932 (GAZ M1 PICKUP) body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 GAZ-M20 "Pobeda" BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #24-L
"TEAPOT" 1/24 GAZ-M20 "Pobeda" Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 GAZ-M20 "Pobeda" BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #24-P
"TEAPOT" 1/24 GAZ-M20 "Pobeda" Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAN Clear "TEAPOT" 1/24 Spyker C8 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #25-L
"TEAPOT" 1/24 Spyker C8 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Spyker C8 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #25-P
"TEAPOT" 1/24 Spyker C8 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Škoda Dakos A5 1978 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #26-L
"TEAPOT" 1/24 Škoda Dakos A5 1978 Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Škoda Dakos A5 1978 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #26-P
Clear "TEAPOT" 1/24 Škoda Dakos A5 1978 Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Dodge Dragster BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #27-L
Clear "TEAPOT" 1/24 Dodge Dragster Body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Dodge Dragster BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #27-P
"TEAPOT" 1/24 Dodge Dragster Body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 GM Firebird concept 15 BODY, Lexan, thickness .01" (0.25 mm), w/paint masks - #28-L
Clear "TEAPOT" 1/24 GM Firebird concept 15 BODY
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
ZHB TOOL & MODEL BOX W/ORGANIZER
Very convenient and practical working case.
-
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
KOFORD Matched .450" long x .155" thick C-Can magnets with new (stronger) orientation, pair - #M607
Matched .450 long x .155 thick C can magnets with new (stronger) orientation. Especially recommended for G12 wing car racing with the M528 can.
-
KOLHOZA AXLE AND PINION CHECKER - KZA009
Deluxe Axle and pinion gear checker. Checks to make sure they are straight.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 pc - #M623S
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust. They feature extra tight diameter tolerances to prevent play between axle and bearings as well as exceptional straightness. They are made from a special tool steel with twice the strength of drill blank axles.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, 1 cd. (6 pcs.) - #M623R
Unplated 3/32 axles for those who wish to flat their own. Superior rust resistance to other unplated axles. These axles have a super hard low friction coating which will not rust.
-
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
KOFORD Ultra precision axle Ø3/32" (2.36 mm), length 53 mm, bulk pack of 100 pcs. - #M623H
Bulk pack of 100 3/32 ultra precision unplated axles. Esceptional tolerances and strength.
-
KOFORD SILVER (5%) SOLDER W/FLUX CORE- #M333
Silver solder with flux core. 5% silver for 82% higher shear strength compared to regular silver solder.
-
KOFORD ARMATURE TUBE, Ø13.5 mm - M602
KOFORD ARMATURE TUBE, Ø13.5 mm - M602
-
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7239332longled
BSV Gear 72 pitch, 39T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7239332longled
Suitable for ES 1/24
-
S&K GEAR 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.3 mm - #SK3972
S&K GEAR 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.3 mm - #SK3972
-
S&K Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.16 mm. For gluing. - #SK3972G
S&K Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.16 mm. For gluing. - #SK3972G
-
VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g
VITULA Gear 72 pitch, 39T, 0° angle, 3/32" axle, Ø14.8 mm, for gluing - #SG790g
-
VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790
VITULA Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.8 mm - #SG790
-
ATTAN Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.15 mm - #ATT7239
ATTAN Gear 72 PITCH, 39T, 0° angle, 3/32" axle, Ø14.15 mm - #ATT7239
-
KOLHOZA Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body, Lexan thin .007” (0.175 mm), with paint mask - #0118
Clear Production 1/32 Lotus Evora GT300 MC Super GT 2017 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body, with paint mask.
-
DUBICK Engineering 2024 F1-32 chassis assembled without ballbearings - #DBF1
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
The chassis comes with a front wheels
-
JK BRASS GUIDE CLIPS, short, pair - #U16
JK BRASS GUIDE CLIPS, short, pair - #U16
PRE BENT BRASS GUIDE CLIPS WITH SHORT TOP PLATE FOR SOLDERING LEAD WIRE IN THE SLOT OF THE GUIDE
The most available guide clips. Made from brass thickness 0,3 mm.
Old catalog #JK3546
-
JK BRASS GUIDE CLIPS, long, pair - #U15
JK BRASS GUIDE CLIPS, long, pair - #U15
The most available guide clips. Made from brass thickness 0,3 mm.
Old catalog #JK3542
-
HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5
HORKY PINION 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #H72P-5-1.5
-
KOFORD HEAT TRANSFER COMPOUND - M295
Heat transfer compound.
Apply between brush and hood on motors to reduce comm temperatures and increase reliability, also especially effective for removable soldering iron tips.
-
DUBICK 3 coil motor springs, steel, pair - #DB600
DUBICK 3 coil motor springs, steel, pair - #DB600
3 coil springs for group 12 and higher motors. Made from hardened steel - one pair
-
DUBICK Panda 55,000 rpm 12V motor - #DB750
DUBICK Panda 55,000 rpm 12V motor - #DB750
Fast and reliable FK group motor.
55 turns 28 AWG wire
Carbon brushes. Short armature shaft.
-
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
DenVel High precision resistance meter. Measurement range 0.001 - 6Ω. Accuracy 1%. NEW VERSION V.2.0
-
SCB braids FLYING CARS (sizes: 4,60 x 0,70 x 30 mm), wing cars (G-7 - G-12), 5 pair - #FCCU01220
SCB braids FLYING CARS, for wing cars (G-12 - G-7), (made in Germany)
- Sizes: 4,60 x 0,70 x 30 mm
- 5 pair.
-
SCB High quality braids TOP-Q (sizes: 4,0 x 0,35 mm х 26 mm), 5 pair - #TQCU01090
SCB High quaility braids TOP-Q (made in Germany) (NEW!)
- Sizes: 4,0 x 0,35 mm х 26 mm,
- 5 pair.
Good braids for all classes.
-
SCB braids ULTRA SOFT (sizes: 4,95 mm x 0,75 mm x 30 mm), 5 pair - #USCU01220
SCB braids ULTRA SOFT, (made in Germany)
- Sizes: 4,95 mm x 0,75 mm x 30 mm,
- 5 pair.
- Ultra soft braids for all classes.
-
SCB High quality braids SUPER THIN soft (sizes: 3,9 x 0,55 mm х 30 mm), 5 pair - #STSCU01150
SCB High quaility braids SUPER THIN soft (made in Germany)
- Sizes: 3,9 x 0,55 mm х 30 mm,
- 5 pair.
Good braids for all classes.
-
SCB High quality braids SUPER SUPER BIG (sizes: 5,2 x 0,8 mm х 25 mm), 5 pair - #SBCU01295
SCB High quaility braids SUPER SUPER BIG (made in Germany) (NEW!)
- Sizes: 5,2 x 0,8 mm х 25 mm,
- 5 pair.
Good braids for all classes.
-
KOFORD LOW TEMP SOLDER W/FLUX CORE - #M444
Like 60/40 but with higher strength. Use for installing motor to chassis (not lead wires), and for assembling all joints on aluminum chassis except for rear motor braces and pillow blocks
-
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019, Lexan .007" (0.175 mm), with paint mask - #0131
OLEG Clear Body Production 1/24 Aston Martin Vantage DTM 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515
VITULA Pinion 72 PITCH, 5T, EDM, 0° angle, 1.5 mm bore - #7515
-
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated - #M542
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, Black Diamond coated - #M542
8 T Black Diamond coated pinion with boss for greater solder surface area for use with G7. Coating reduces friction and prevents solder from flowing into teeth. Use against plastic spurs only
-
RedFox Cutdown Nylon Guide Flag, unthreaded, Low Profile. This in effect lengthens the chassis. - #RFBAGH
RFBAGH - This is Red fox's new Guide flag. It is a new design in that the post is further back. This in effect lengthens the chassis resulting in better handling and better lap times (especially Retro).
-
RedFox Cutdown GRAPHITE Guide Flag, unthreaded, Low Profile. This in effect lengthens the chassis. - #RFBAGHG
This is the same high performance guide as RFBAGH but in Graphite
-
ARP PINION 72 PITCH, 6T, 0° angle, 1.5 mm bore (FOR F1/32) - ARP#7206-1,5 mm
1.5 mm shaft - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle - #BSV72392
BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle - #BSV72392
-
BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72392led
BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a short hub, for gluing - #BSV72392led
Suitable for ES 1/32
-
BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72392longled
BSV Gear 72 pitch, 39T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72392longled
Suitable for ES 1/24
-
S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722
S&K GEAR 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm - #SK39722
-
ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392
ATTAN Gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.15 mm - #ATT72392
-
CAHOZA 9MM GUIDE NUTS - #31-1
GUIDE NUTS 9MM
aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag -
CAHOZA 9MM GUIDE NUTS, 10 pc - #31
GUIDE NUTS 9MM
aluminium guide nuts, professionaly made on a CNC machine, including the hexagon shape, absolutely precise, size is 9mm (.354"), packaged 10pcs per bag -
S&K 0- 17V, 12A Power Supply. 110v or 220v. Weight 340 gr./ 0.75 lb. Dimensions: 110 x 90 x 48 mm - #SK0108
New ultra small power supply!
PARAMETERS
- Type: DC
- Input voltage, V: 110 or 220
- Adjustable voltage, V: 0-17
- Weight, gr: 340
- Dimensions, mm: 110x90x48
- Displays voltage & current
-
MS-SLOTPARTS UNF thread cutter (USA) #10-32
MS-SLOTPARTS UNF thread cutter (USA) #10-32
-
MS_SLOTPARTS Metric thread cutter M5
MS_SLOTPARTS Metric thread cutter M5
-
MS-SLOTPARTS Guide threader base (ONLY)
MS-SLOTPARTS Guide threader base (w/out cutter)
WITHOUT CUTTER!!
The thread cutting tool for the demanding slotracer. The threads are cut clean and evenly. Even Gugu guides (RedFox) can be easily cut.
-
MID AMERICA Guide flag threaded - fit all guides - imperial thread 0-80 - #MID416
MID AMERICA Guide flag threaded - fit all guides - imperial thread 0-80 - #MID416
-
SCB braids FLYING CARS PLUS (sizes: 4,90 x 0,80 x 30 mm), wing cars (G-7 - G-12), 5 pair - #FCCU01260
SCB braids FLYING CARS PLUS, for wing cars (G-12 - G-7), (made in Germany)
- Sizes: 4,90 mm x 0,80 x 30 mm
- 5 pair.
-
KOLHOZA REAR WHEEL CUTTER Ø20MM - KZA010
Wheel well cutting tool - cuts rear wheel well at 20mm
-
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.52 mm - #5B
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 3/32" axle, Ø14.52 mm
-
KOFORD STANDART PROFILE GRAPHITE GUIDE, THREADED - #M273
Precision threaded graphite guide with lead wire slots.
On each one guide there is an inscription «STARBURST»
-
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
DUBICK Rear bridge for the chassis "TEAPOT" 1/24 (model width 83 mm, rims width 18 mm, brigde width 43.5 mm)
Suitable for 16 mm gears.
-
OLEG Production 1/24 Lamborghini Huracan body for 4" chassis, Lexan .005" (0.125 mm), with paint mask - #0142T
Body Production 1/24 Lamborghini Huracan
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
EAGLE Track braid roller tool - #EDP105
EAGLE Track braid roller tool - #EDP105
-
BSV Crown gear 48 pitch 28T, 3/32" axle, Ø17.9 mm - #BSV0728
BSV Crown gear 48 pitch 28T, 3/32" axle, Ø17.9 mm - #BSV0728
-
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened - #M671-28
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened - #M671-28
Narrowed and lightened precision low wobble 28 tooth x 3/32 crown gears. Precision bored axles hole and lightweight magnesium hub
-
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-28
KOFORD Crown gear 48 pitch 28 teeth, 3/32" axle, narrowed & lightened, 1 cd. (6 pcs.) - #M671-28
Narrowed and lightened precision low wobble 28 tooth x 3/32 crown gears. Precision bored axles hole and lightweight magnesium hub
-
RED FOX Crown gear 48 pitch 28 teeth, 3/32" axle - #RFCROWN28TN
RED FOX Crown gear 48 pitch 28 teeth, 3/32" axle - #RFCROWN28TN
-
BSV Crown gear 48 pitch 29T, 3/32" axle - #BSV0729
BSV Crown gear 48 pitch 29T, 3/32" axle - #BSV0729
-
BSV Crown gear 48 pitch 30T, 3/32" axle - #BSV0730
BSV Crown gear 48 pitch 30T, 3/32" axle - #BSV0730
-
BSV Crown gear 48 pitch 31T, 3/32" axle - #BSV0731
BSV Crown gear 48 pitch 31T, 3/32" axle - #BSV0731
-
BSV Crown gear 48 pitch 32T, 3/32" axle - #BSV0732
BSV Crown gear 48 pitch 32T, 3/32" axle - #BSV0732
-
BSV Crown gear 48 pitch 33T, 3/32" axle - #BSV0733
BSV Crown gear 48 pitch 33T, 3/32" axle - #BSV0733
-
BSV Crown gear 48 pitch 34T, 3/32" axle - #BSV0734
BSV Crown gear 48 pitch 34T, 3/32" axle - #BSV0734
-
BSV Crown gear 48 pitch 42T, 3/32" axle - #BSVF4842332
BSV Crown gear 48 pitch 42T, 3/32" axle - #BSVF4842332
-
MID AMERICA Braid roller tool - heavy duty for commercial tracks - #MID415
MID AMERICA Braid roller tool - heavy duty for commercial tracks
-
ZHB Set of steel files, 3 pcs.
ZHB Set of steel files, 3 pcs.
-
ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 10 pcs.
Set of small steel files with diamond coating 10 pcs.
-
RED FOX Guide nut, brass, 1 pc. - # RFG01
RED FOX Guide nut, brass, 1 pc. - # RFG01
-
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
JK 4" cheetah Aeolos 1 piece pan 0.040" thick - #C26PT
-
JK 4" Cheetah Aeolos 1 piece pan - #C26P
JK 4" Cheetah Aeolos 1 piece pan - #C26P
-
BSV Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.50 mm - #BSV724216
BSV Gear 72 pitch, 42T, 16° angle, 3/32" axle, Ø15.50 mm - #BSV724216
-
S&K Gear 72 PITCH 42T, 16° angle, 3/32" axle, Ø15.35 mm - #SK4272A
S&K Gear 72 PITCH 42T, 16° angle, 3/32" axle, Ø15.35 mm - #SK4272A
-
ATTAN GEAR 72 PITCH 42T, 16° angle, 3/32" axle - #ATT724216
ATTAN GEAR 72 PITCH 42T, 16° angle, 3/32" axle - #ATT724216
-
CAHOZA POLYMER GEAR 72 PITCH, 42T, 16° ANGLE, 3/32" AXLE, Ø15.38 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
CAHOZA POLYMER GEAR 72 PITCH, 42T, 16° ANGLE, big hub, 3/32" AXLE, Ø15,38 mm, stronger - #4-B
HIGHLY DURABLE GEARS 72 PITCH ANGLED 16°
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 42 teeth, angled by 16° -
ARP PLASTIC SPUR GEAR 72 PITCH, 42T, 15° angle, 3/32" axle, Ø15.38 mm - #ARP7242BP
72 pitch Pro Series Spur Gear - 42 tooth 15 degree angle plastic spur for 3/32 axle
-
BSV Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.70 mm - #BSV724316
BSV Gear 72 pitch, 43T, 16° angle, 3/32" axle, Ø15.70 mm - #BSV724316
-
S&K Gear 72 PITCH 43T, 16° angle, 3/32" axle, Ø15.78 mm - #SK4372A
S&K Gear 72 PITCH 43T, 16° angle, 3/32" axle, Ø15.78 mm - #SK4372A
-
KOFORD ARMATURE TUBE, Ø13.5 mm, 6 pcs.
KOFORD ARMATURE TUBE, Ø13.5 mm, 6 pcs.
-
KOLHOZA STAND FOR AXLE WITH GEARS - KZA020
Stand for axles with gears ready for quick replacement. Holds up to 10 axles with gears. Use for storage or to keep replacements ready for quick change
-
KOLHOZA REAR WHEEL CUTTER Ø22MM - KZA0101
Wheel well cutting tool - cuts rear wheel well at 22mm
-
ZHB SET OF SMALL STEEL FILES W/DIAMOND COATING, 12 pcs.
Set of small steel files with diamond coating 12 pcs.
-
MS-SLOTPARTS Balancing axle, dia. 3/32"
MS-SLOTPARTS Balancing axle, dia. 3/32"
-
SCB High quaility braids SUPER SOFT (sizes: 4,0 x 0,5 mm х 26 mm), silver plated, 5 pair - #SSAGO01100
SCB High quaility braids SUPER SOFT, silver-plated, (made in Germany)
- Sizes: 4,0 mm x 0,5 mm x 26 mm,
- 5 pair.
-
SCB braids BIG FLY (sizes: 4,75 mm x 0,65 x 30 mm), wing cars, 5 pair - #BFCU01215
SCB braids BIG FLY, for wing cars (G-12 - G-7), (made in Germany)
- Sizes: 4,75 mm x 0,65 x 30 mm
- 5 pair.
-
SCB High quality braids SUPER FINE (sizes: 4,0 x 0,25 mm х 26 mm), tin plated, 5 pairs - #SFSN01085
SCB High quality braids SUPER FINE, tin plated, 5 pairs - #SFSN01085
sizes: 4,0 x 0,25 mm х 26 mm (.157" x .010" x1.024")
Made in Germany!
-
VALIKO 0-15V, 12А, POWER SUPPLY 220V, ADJUSTABLE VOLTAGE/CURRENT
PARAMETERS
- Type: DC
- Input voltage, V: 220 (110)
- Adjustable voltage, V: 0-16
- Adjustable max current
- Weight, gr: 850
- Switch between voltage/current
- Displays current
- LED display
-
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
JK 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24, ISRA legal - #C25
4" Cheetah X25 Stainless Steel Chassis Kit 0.9mm thick. Features: Radial pressing guide plate, holes for either 1/2" or 5/8" fronts, shorter in length than the X24 chassis and slightly thicker in the rear pillar block than the X24.
Old catalog #JKX25
-
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
JK 4" CHEETAH X25 CENTER SECTION 0.9MM - #C25C
.9mm thick replacement center section for the JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25C
-
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
JK 4" CHEETAH X25 PAN 0.9MM - #C25P
0.9mm replacement pans for 4" X25 chassis JKP 4" CHEETAH X25 KIT 0.9MM THICK chassis for PRODUCTION 1/24- #JKPX25
Old catalog #JKX25P
-
KOLHOZA WHEEL STAND - KZA012
Wheel stand is for holding any kind of tires.
-
CAHOZA ARM (2 mm) SPACER BRONZE .012" (0,3 mm), 24 psc. - #38
PHOSPHOR BRONZE SPACERS 0,3
the same as #36, but thickness is 0,3mm (.0118"), packaged 24 per bag -
SLICL7 ARMATURE (2 MM) BRONZE SPACER .030" (0.8 MM) THICK, 6 pcs. - #S7-283
ARMATURE SPACER , .030 THICK, MACHINED (NEW THICKNESS)
-
KOFORD CUT BRASS PIN TUBE, lenght 12.8 mm, 24 psc. in box - #M453
Precut brass pin tubes. Use for solid mount EDM chassis for the front mount or use in all chassis for pin tubes.
-
KOFORD STEEL PIN TUBING, lenght 80 mm, 1 pc. - #M259
Precut spring temper stainless steel pin tubing, fits full width of car.
-
S&K 72 PITCH 39T, 0° angle, 3/32" axle, Ø14.3 мм, glued on 3/32" Proslot axle - ZHB#223
he hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
MS-SLOTPARTS Balancing axle, dia. 3/32" with flat (special order)
MS-SLOTPARTS Balancing axle, dia. 3/32" with flat (special order)
-
KOLHOZA Rear wheel cutter Ø24 mm - #KZA010-24
KOLHOZA Rear wheel cutter Ø24 mm - #KZA010-24
Wheel well cutting tool - cuts rear wheel well at 24 mm
-
KOLHOZA Rear wheel cutter Ø26 mm - #KZA010-26
KOLHOZA Rear wheel cutter Ø26 mm - #KZA010-26
Wheel well cutting tool - cuts rear wheel well at 26 mm
-
MG Digital clearance measuring tool
MG Digital clearance measuring tool
Convenient tool for tech inspection! Precision digital measures. Deepening for guide. It's possible to measure in mm or inches and adjustable zero point.
-
KOLHOZA ALUMINUM STAND FOR TIRE BOTTLES JK Ø23.5 mm (JK, Alpha), 80 х 140 mm - KZA013
An aluminum tire stand for tires with larger size bottles (usually 13/16 to 7/8" size). Fits 11 pairs of tires.
-
MS-SLOTPARTS Tire rack (special order)
MS-SLOTPARTS Tire rack (special order)
A tire rack of luxury class, ultra light, foldable.
This tire rack impresses with its construction and the material used and ensures order in the tire bearing
By folding the individual rows, it can be stored in a space-saving manner.
-
S&K TIRE TRUER 3/32" and 2 mm axles included - #SK0102
Tire truer from the ukrainian manufacturer S&K
-
KOLHOZA ALUMINUM STAND / TIRE BOTTLES PARMA Ø27 mm (PSE, Alpha Large), 80 х 195 mm - KZA0131
Aluminum Tire Stand for tires with the smaller diameter tube. Usually .790 and smaller
-
CAHOZA ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZHB#229
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB Metal drill, dia. 2,1 mm
ZHB Metal drill, dia. 2,1 mm
Made in USSR!
-
BSV TIRE TRUER
BSV TIRE TRUER
New tire truer with on / off button, made with two types of needle trimming in diameter, three spacers 16 mm, 20 mm, 20.7 mm, a limb for setting the diameter as on a micrometer, a reduced size and weight.
-
BSV Set for upgrade old version of the BSV tire truer to the current
BSV Set for upgrade old version of the BSV tire truer to the current
-
VITULA End mill bore 2 mm - #T1250
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
NeAn Clear "TEAPOT" 1/24 GM Firebird concept 15 BODY, PVC, thickness .015" (0.4 mm), w/paint masks - #28-P
Clear "TEAPOT" 1/24 GM Firebird concept 15 BODY
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.4 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 KTM X-BOW GT-4 body, Lexan, thickness .01" (0.25 mm), w/paint masks - #29-L
Clear "TEAPOT" 1/24 KTM X-BOW GT-4 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .005" (0.125 mm), w/paint masks - #31-L-5
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .007" (0.175 mm), w/paint masks - #31-L-7
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .01" (0.25 mm), w/paint masks - #31-L-10
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body, Lexan, thickness .015" (0.38 mm), w/paint masks - #31-L-15
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polycarbonate (Lexan)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.38 mm)
- Clear body, with paint mask
-
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body, PVC, thickness .015" (0.38 mm), w/paint masks - #31-P
NeAn Clear "TEAPOT" 1/24 Glickenhaus SCG 003 2015 body
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness: .015" (0.38 mm)
- Clear body, with paint mask
-
KOLHOZA Kit for assembly chassis F1/24 w/body
KOLHOZA Kit for assembly chassis F1/24 w/body
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in JAGUAR R1 2000, set with mounting film - #0001
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in JAGUAR R1 2000, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in Tyrrel 023 1995, set with mounting film - #0002
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in Tyrrel 023 1995, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in ARROWS Fa18 1997, set with mounting film - #0003
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in ARROWS Fa18 1997, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in Super Aguri SA 07 2007, set with mounting film - #0004
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in Super Aguri SA 07 2007, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in Jordan 191 1991, set with mounting film - #0005
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in Jordan 191 1991, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in RENAULT RS 16, set with mounting film - #0006
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in RENAULT RS 16, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in McLAREN MR 4-31, set with mounting film - #0007
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in McLAREN MR 4-31, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in JAGUAR R5 2004, set with mounting film - #0008
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in JAGUAR R5 2004, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in SCUDERIA TORO ROSSO STR12 2017, set with mounting film - #0009
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in SCUDERIA TORO ROSSO STR12 2017, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in ARROWS 2000, set with mounting film - #0010
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in ARROWS 2000, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in JORDAN 12 2002, set with mounting film - #0014
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in JORDAN 12 2002, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in MERCEDES AMG W07 2016, set with mounting film - #0015
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in MERCEDES AMG W07 2016, set with mounting film
-
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in SCUDERIA FERRARI SF70H 2017, set with mounting film - #0016
KOLHOZA Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body in SCUDERIA FERRARI SF70H 2017, set with mounting film
-
KOLHOZA Clear Body Formula 1/32 Ferrari SF 90 thin .005" (0.125 mm) - #0123LT
Clear Body Formula 1/32 Ferrari SF 90
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
KOLHOZA Clear Body Formula 1/32 Ferrari SF 90 thin .007" (0.175 mm) - #0123L
Clear Body Formula 1/32 Ferrari SF 90
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
KOLHOZA Clear Body Formula 1/32 McLaren MCL36, thin .005" (0.125 mm) - #0125LT
Clear Body Formula 1/32 McLaren MCL36
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
KOLHOZA Clear Body Formula 1/32 McLaren MCL36, thin .007" (0.175 mm) - #0125L
Clear Body Formula 1/32 McLaren MCL36
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
KOLHOZA EUROSPORT 1/32 AUDI BODY, LEXAN, thickness .005" (0.125 mm) - #653-LT
EUROSPORT 1/32 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Special order!
-
ATTAN VOLVO S60 TTA STICKER, w/cut outline, 94 х 140 mm
ATTAN VOLVO S60 TTA STICKER, w/cut outline, 94 х 140 мм
-
NeAn Clear body Retro 1/24 Ferrari 330 P4 1967, Lexan .010" (0.254 mm) - #111-L
Clear body Retro 1/24 Ferrari 330 P4 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
OLEG Production 1/24 Lamborghini Huracan body for 4" chassis, Lexan .007" (0.175 mm), with paint mask - #0142
Body Production 1/24 Lamborghini Huracan
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
JK 4" Cheetah aeolos aluminum pan - #C26PA
JK 4" Cheetah aeolos aluminum pan - #C26PA
Old catalog #C43PA
-
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
JK J-bar accessory pack for C26 aeolos chassis (0.8mm, 0.9mm. 1.0mm, 1.1mm, 1.2mm, 1.3mm, 1.2mm, 1.3mm - #C26J
Part number is JKC26J and the price is $4.95 for a pack of 6 bars: 0.031" = 0.8mm 0.035" = 0.9mm (stock front) 0.039" = 1.0mm 0.043" = 1.1mm.
Old catalog #C43J
-
JK .050" Allen wrench w/guide nut tool 9 mm, blue - #L15
JK .050" Allen wrench w/guide nut tool 9 mm, blue - #L15
Wrench _ Tire & Gear Wrench w 9mm Guide Tool, 2mm Shaft, 0.050" HRC Hardened Precision Tolerance Tip
-
JK CLEAR LEXAN CONTROLLER HANDLE (pair) - #N8
JK CLEAR LEXAN CONTROLLER HANDLE (pair) - #N8
Controller Handle - This is a replacement for the Red Fox controller handle
Old catalog #JK8080
-
ZHB Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F
Ballbearing 3 х 7 х 3 mm flanged, 1 Pc. - #3х7х3F
This ballbearing instalation in Controller trigger
-
QBICK Kit for assembly mini-slot car box "Sportsman Working Place"
QBICK Kit for assembly mini-slot car box "Sportsman Working Place"
Made from plywood 3 & 4 mm (.118" & .157").
In box made a special place for storage 4 models, 8 tire tubes & 3 drawers. Includes all parts for assembly (bolts & nuts for moving parts, hinges, latches for doors).
Main parameters:
- Length: 290 mm (11.417");
- Width: 230 mm (9.055");
- Height: 190 mm (7.480");
-
CHAMPION LIGHT BRUSH SPRINGS, 2 coils, red, pair - CHA526L
Champion Red Brush Springs - Light - Lightweight high performance "red" for all motors
Universal springs, which suitable for all types of motors
-
KOLHOZA FORMULA 1/32 RED BULL BODY, LEXAN, thickness .005" (0.125 mm)
Formula 1/32 RED BULL Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
Special order!
-
GOPHERT 0- 16 volt 10 amp switching DC Power Supply. Adjustable voltage displays amps or voltage. 110v or 220v. Wires are attached. Total weight is 810 gr. Dimensions: 120 x 55 x 168mm.
PARAMETERS
- Type: DC
- Input voltage, V: 110 or 220
- Adjustable voltage, V: 0-16
- Total weight, gr: 810
- Dimensions, mm: 120x55x168
- Displays current
- LED display
-
KOLHOZA Kit for assembly chassis F1/24. Fiberglass thin. 1,5 mm (0.06")
KOLHOZA Kit for assembly chassis F1/24. Fiberglass thin. 1,5 mm (0.06")
This kit is made for assembly by the rivets. Parts are pre-cut. You can find assembly example in the gallery.
-
KOLHOZA Kit for assembly chassis F1/24. Fiberglass thin. 2 mm (0.078")
KOLHOZA Kit for assembly chassis F1/24. Fiberglass thin. 2 mm (0.078")
This kit is made for assembly by the rivets. Parts are pre-cut. You can find assembly example in the gallery.
-
KOLHOZA Kit for assembly chassis F1/24 or ES24U. Fiberglass thin. 1,5 mm (0.06")
KOLHOZA Kit for assembly chassis F1/24 or ES24U. Fiberglass thin. 1,5 mm (0.06")
This kit is made for assembly by the rivets. Parts are pre-cut. You can find assembly example in the gallery.
-
KOLHOZA Kit for assembly chassis F1/24 or ES24U. Fiberglass thin. 2 mm (0.078")
KOLHOZA Kit for assembly chassis F1/24 or ES24U. Fiberglass thin. 2 mm (0.078")
This kit is made for assembly by the rivets. Parts are pre-cut. You can find assembly example in the gallery.
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR02
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis details
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOLHOZA GUIDE SANDING TOOL - KZA011
Guide sanding tool
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/28
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 20
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
-
KOFORD 760" LONG, C12 ARMATURE (for set in Eurosport motors) - #М467-12C
race arm, 32° .490 C12 arm .760 long, 2006 Nat’s winner Pro
Alternative to expensive Eurosport class armatures. Suitable for all setups, except the latest micro-motors for F 1/32.
-
PK Eurosport armature PK, windings 30/50, dia. .465", stack .230", .600" long, 26 degree
PK F32 Eurosport armature
Fit for Cahoza, VOKI, ZHB setups.
-
KOFORD Model wheels Koford FISH 3/32" axle, .760" (19.3 mm) dia., small hub, magnesium rims - #M551-760F
KOFORD Model wheels Koford FISH 3/32" axle, .760" (19.3 mm) dia., small hub, magnesium rims - #M551-760F
Fish rubber mounted on .432 OD plain hub. Ideal when less bite then full hub tires provide is needed. Good for lower horsepower classes. Economical
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .760" (19.3 mm)
- Rims material: magnesium
- Tire: FISH
- For classes scale: 1/24
-
KOFORD Model wheels Koford FISH 3/32" axle, .760" (19.3 mm), magnesium rims - #M662-760F
KOFORD Model wheels Koford FISH 3/32" axle, .760" (19.3 mm), magnesium rims - #M662-760F
3/32x.760 Fish tires are suitable for most traction conditions with scale cars.
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .760" (19.3 mm)
- Rims material: magnesium
- Tire: FISH
- For classes scale: 1/24
-
KOFORD Model wheels SOFT wonder tires 3/32" axle, .760" (19.3 mm) dia,, magnesium rims - #M229-760SW
KOFORD Model wheels SOFT wonder tires
Soft Wonder on .472 diameter magnesium rims
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .760" (19.3 mm)
- Rims material: magnesium
- Tire: SOFT wonder
- Best for: wing classes
-
MID AMERICA Model wheels 3/32" axle, .760" (19.3 mm), on plastic rims, full hub, FISH small, pair - #MID01F
MID AMERICA Model wheels, pair - #MID01F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .760" (19.3 mm)
- Rims material: plastic
- Tire: FISH
- For classes scale: 1/32
-
MID AMERICA Model wheels 3/32" axle, .720" (18.3 mm) dia., on plastic rims, full hub, FISH small, pair - #MID00F
MID AMERICA Model wheels, pair - #MID00F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .720" (18.3 mm)
- Rims material: plastic
- Tire: FISH
- For classes scale: 1/32
-
PROSLOT Euro MK1 Motor - 26.000+ rpm - #PS-4000
PROSLOT Euro MK1 Motor - 26.000+ rpm
155/gm-cm, 280mA, standard with 45 degree springs. Designed for 1/32 and 1/24 ScaleHome, Club and Commercial Racing. CW or CCW rotation
-
DUBICK diamond drum for tire truer BSV, 70 grit (grain diameter 0,315 mm) - #DB718
DUBICK Diamond drum for tire truer BSV, grain 0,3/0 mm
-
HUDY SLOT TIRE TRUER (1/8 + 3/32 Axles) - #103100
One of the besr tire truers. Very famous in America & in Europe
For more information you can visit the following link:
-
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
DUBICK Diamond drum for HUDY tire truer, 60 grit (grain diametr 0,250 mm) - #751
-
HUDY Rubber transmission belt for tire truer HUDY #103100 Ø30 mm & Ø40 mm. (2 pcs.)
HUDY Rubber transmission belt for tire truer HUDY #103100 Ø30 mm & Ø40 mm. (2 pcs.)
Strong rubber transmission belt
-
LUCKY BOBS TIRE FILE (w/big & small grain of files) - #1500
LUCKY BOBS TIRE FILE (w/big & small grain of files) - #1500
Used to get the right wheel width (big grain), as well as for edge rounding (small grain)
-
MS-SLOTPARTS Guide Threader 2.0 Imperial Thread
MS-SLOTPARTS Guide Threader 2.0 Imperial Thread
Insert the guide, center with the threaded knob and cut lightly the thread into threaded direction. A drop of oil in the cutting, especially in Gugu guides (RedFox), works better.
-
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
KOFORD Ø.537" (13.64 mm) bearing assembly tool (for motor) - #M188-537
Prepare your motor fast & precise.
-
KOFORD Ø.539" (13.69 mm) bearing assembly tool (for motor) - #M188-539
KOFORD Ø.539" (13.69 mm) bearing assembly tool (for motor) - #M188-539
Prepare your motor fast & precise.
-
KOFORD Ø.541" (13.74 mm) bearing assembly tool (for motor) - #M188-541
KOFORD Ø.541" (13.74 mm) bearing assembly tool (for motor) - #M188-541
Prepare your motor fast & precise.
-
KOFORD Ø.542" (13.77 mm) bearing assembly tool (for motor) - #M188-542
KOFORD Ø.542" (13.77 mm) bearing assembly tool (for motor) - #M188-542
Prepare your motor fast & precise.
-
KOFORD Ø.560" (14.22 mm) bearing assembly tool (for motor) - #M188C-560
KOFORD Ø.560" (14.22 mm) bearing assembly tool (for motor) - #M188C-560
Koford Bearing installation tool made out of aluminum. Machined aluminum with 2mm shaft useful in gluing in magnets and installing can end bearings and oilites. Available in many sizes ranging from .468 to .590
Actual photo will be added soon :)
-
KOFORD Ø.569" (14.45 mm) bearing assembly tool (for motor) - #M188-569
KOFORD Ø.569" (14.45 mm) bearing assembly tool (for motor) - #M188-569
Prepare your motor fast & precise.
-
KOFORD Ø.571" (14.50 mm) bearing assembly tool (for motor) - #M188-571
KOFORD Ø.571" (14.50 mm) bearing assembly tool (for motor) - #M188-571
Prepare your motor fast & precise.
-
KOFORD Ø.580" (14.73 mm) bearing assembly tool (for motor) - #M188C-580
KOFORD Ø.580" (14.73 mm) bearing assembly tool (for motor) - #M188C-580
Koford Bearing installation tool made out of aluminum. Machined aluminum with 2mm shaft useful in gluing in magnets and installing can end bearings and oilites. Available in many sizes ranging from .468 to .590
-
ZHB DIAMOND MAGNET HONE Ø12.05 mm
ZHB DIAMOND MAGNET HONE Ø12.05 mm
-
JK Gear 48 pitch, 26T, 1/8" axle, Ø14.76 mm, w/screw - #G426
JK Gear 48 pitch, 26T, 1/8" axle, Ø14.76 mm, w/screw - #G426
Old catalog #JK4126
-
JK GEAR 48 PITCH, 27T, 1/8" axle with hub adaptor 3/32", Ø15.2 mm, w/screw - #G427
JK GEAR 48 PITCH, 27T, 1/8" axle with hub adaptor 3/32", Ø15.2 mm, w/screw - #G427
Old catalog #JK4127
-
JK GEAR 48 PITCH, 27T, 1/8" axle, Ø15.2 mm, w/screw - #G427
JK GEAR 48 PITCH, 27T, 1/8" axle, Ø15.2 mm, w/screw - #G427
Old catalog #JK4127
-
JK GEAR 48 PITCH, 28T, 1/8" axle, Ø15.8 mm, w/screw - #G428
JK GEAR 48 PITCH, 28T, 1/8" axle, Ø15.8 mm, w/screw - #G428
Old catalog #JK4128
-
JK GEAR 48 PITCH, 28T, 1/8" axle with hub adaptor 3/32", Ø15.8 mm, w/screw - #G428
JK GEAR 48 PITCH, 28T, 1/8" axle with hub adaptor 3/32", Ø15.8 mm, w/screw - #G428
Old catalog #JK4128
-
PARMA SLOT SPUR GEAR 48 PITCH, 31T, 1/8" axle, (Ø17.61 mm) with hub adaptor 3/32", with screw - #70131
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included
-
VOKI Mylar diaplane .010" (0,25mm) - 150 x 215mm – body reinforcement - #046
VOKI Mylar diaplane .010" (0,25mm) - 150 x 215mm – body reinforcement
Thickness: .010" (0,25 mm)
-
LUCKY BOB BRAID JUICE, 1 bottle (60 ml) - #1400
BRAID JUICE
-
KOFORD HIGH TEMP ENDBELL EPOXY, one-component - #M385
High temp. endbell epoxy. Optimized for use in endbells. Oven cure
-
ATTAN BMW STICKER SHEET M POWER 94 х 140 мм
The original set of stickers for the BMW DTM body, which will be used for the World Championship 2015 in the Czech Republic.
-
ATTAN BMW M4 DTM DEUTSHE POST Sticker sheet, 94 х 140 mm
The original set of stickers for the BMW DTM body, which will be used for the World Championship 2015 in the Czech Republic.
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pc. - #LB1016
-
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
LUCKY BOB Lead sheet thickness .016" (0,4 mm), with double-stick tape, 1 pk. (6 pc.) - #LB1016-6
-
LUCKY BOB Lead sheet thickness .032" (0,8 mm), 38x53 mm with a adhesive tape - #LB1032
LEAD .032" (0,8 mm) THICK, 38x53 mm, WITH DOUBLE STICK TAPE
-
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape - #LB1063
LUCKY BOB Lead sheet thickness .063" (1,6 mm), 2" x 1" (50,8 x 25,4 mm) with a adhesive tape
-
GRW Premium Precision Ballbearing 2 х 5 х 1,5 mm, unshielded - #SS682
GRW - is a German manufacturer of premium class.
Premium Precision Ballbearing 2 х 5 х 1,5 mm, unshielded - #SS682
-
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
DUBICK Ballbearing 2 х 5 х 2,3 mm flanged, shielded, 7 balls, pair - #DB608
-
ZHB DIAMOND MAGNET HONE Ø12.25 mm
ZHB DIAMOND MAGNET HONE Ø12.25 mm
-
VALIKO Armature Х-12 45º, 0.515" diam.
VALIKO Armature Х-12 45º, 0.515" diam.
-
NeAn FORMULA 1/24 MCLAREN BODY, Lexan, thin .01" (0.25mm) - #40-L
Formula 1/24 McLaren Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
KOLHOZA STAND WITH PIT-BOX - KZA014
Stand for model with pit box is a very comfortable thing, when your're going to the track for practice
-
VALIKO Armature Х-12 48º, 0.515" diam. (ISRA 2019 in UK oficial armature)
Avialable for pre-order on end of December and first half of Janure
-
VALIKO Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree and long.
Avialable for special order
-
OLEG Production 1/24 Ferrari 488 GT3 EVO body for 4" chassis, Lexan .005" (0.125 mm), with paint mask - #0145T
Body Production 1/24 Ferrari 488 GT3 EVO
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
OLEG Body Eurosport 1/24U Acura ARX-05 DPi IMSA, thin .007” (0.175 mm), with paint mask - #0123
Eurosport 1/24U Acura ARX-05 DPi IMSA body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24U
- Thickness: .007" (0,175 mm)
- with paint mask
-
NeAn FORMULA 1/24 MCLAREN BODY, PVC, thin. .015" (0.4mm) - #40-P
Formula 1/24 McLaren Body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4mm)
-
NeAn FORMULA 1/24 FERRARI 312 BODY, Lexan, thin .01" (0.25mm) - #41-L
Formula 1/24 Ferrari 312 Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 FERRARI 312 BODY, PVC, thin. .015" (0.4 mm) - #41-P
Formula 1/24 Ferrari 312 Body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 FITTIPALDI 1979 BODY, Lexan, thin .01" (0.25mm) - #42-L
Formula 1/24 Body Fittipaldi 1979
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 FITTIPALDI 1979 BODY, PVC, thin .015" (0.4 mm) - #42-P
Formula 1/24 Body Fittipaldi 1979
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Brabham BT 55 1986 body, Lexan, thin .01" (0.25mm) - #43-L
Formula 1/24 Body Brabham BT 55 1986
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 Brabham BT 55 1986 body, PVC, thin .015" (0.4 mm) - #43-P
Formula 1/24 Body Brabham BT 55 1986
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Renault RS01 1976 body, Lexan, thin .01" (0.25mm) - #44-L
Formula 1/24 Renault RS01 1976
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
OLEG Production 1/24 Ferrari 488 GT3 EVO body for 4" chassis, Lexan .007" (0.175 mm), with paint mask - #0145
Body Production 1/24 Ferrari 488 GT3 EVO
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, Lexan .01" (0.25 mm), with paint mask - #01455T
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, Lexan .015" (0.375 mm), with paint mask - #01455
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .015" (0.375 mm)
- Clear body, with paint mask
-
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers, PVC .02" (0.4 mm), with paint mask - #01455P
OLEG Clear body 1/24 NASCAR Pick Up for 4" chassis, w/window and front stickers
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .02" (0.4 mm)
- Clear body, with paint mask
-
OLEG Clear body Production 1/24 Toyota Camry NASCAR for 4" chassis, Lexan .005" (0.125 mm), with paint mask - #0154T
OLEG Clear body Production 1/24 Toyota Camry NASCAR
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
OLEG Clear body Production 1/24 Toyota Camry NASCAR for 4" chassis, Lexan .007" (0.175 mm), with paint mask - #0154
OLEG Clear body Production 1/24 Toyota Camry NASCAR
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
KOLHOZA PRODUCTION 1/24 SUBARU WRC BODY, LEXAN, thickness .005" (0.125 mm) - #0101T
PRODUCTION 1/24 SUBARU BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA PRODUCTION 1/24 SUBARU WRC BODY, LEXAN, thickness .007" (0.175 mm) - #0101
PRODUCTION 1/24 SUBARU BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
KOLHOZA Clear Production 1/32 McLaren F1 GT body, Lexan thickness .005" (0.125 mm) - #651-LT
Clear Production1/32 McLaren F1 GT body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0.125 mm);
- Clear body, with paint mask.
-
KOLHOZA Clear Production1/32 McLaren F1 GT body, Lexan thickness .007" (0.175 mm) - #651-L
Clear Production1/32 McLaren F1 GT body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0.175 mm);
- Clear body, with paint mask.
-
NeAn FORMULA 1/24 Renault RS01 1976 body, PVC, thin .015" (0.4 mm) - #44-P
Formula 1/24 Body Renault RS01 1976
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Ligier JS11 1979 body, Lexan, thin .01" (0.25mm) - #45-L
Formula 1/24 Ligier JS11 1979
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 Ligier JS11 1979 body, PVC, thin .015" (0.4 mm) - #45-P
Formula 1/24 Body Ligier JS11 1979
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
NeAn FORMULA 1/24 Lotus 88 1980 body, Lexan, thin .01" (0.25mm) - #46-L
Formula 1/24 Lotus 88 1980
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 Lotus 88 1980 body, PVC, thin .015" (0.4 mm) - #46-P
Formula 1/24 Body Lotus 88 1980
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
K&S Engineering Hand tap 0-80" - #KS435
K&S Engineering Hand tap 0-80" - #KS435
-
B52 Magnesium rims for 2 mm axle, width 16 mm, Ø.393" (10.2 mm), 0.97 g. per pair
B52 Magnesium rims
- For 2 mm axle;
- Width 16 mm;
- Dia. .393" (10.2 mm);
- 0.97 g. per pair
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø10.5 mm - #BSV2010,52
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 10.5 mm.
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/32. Full cut details kit, ready for build by rivets - #IR04
KIT FOR BUILD CHASSIS "TEAPOT" 1/32
Parameters:
- Kit for buid chassis: "TEAPOT" 1/32
- Scale: 1:32
- Full cut details kit, ready for build by rivets
-
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
JK 5/8"D 1/16"A Front Wheel Plastic, O-ring, 5 Spoke (pr) - #T125O
Old catalog #JK8724
-
PARMA SPUR GEAR 48 PITCH, 32T, 1/8" AXLE (Ø18.17 mm), with screw - #70132
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
PARMA SPUR GEAR 48 PITCH, 33T, 1/8" AXLE (Ø18.73 mm), with screw - #70133
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
BSV Gear 48 pitch, 32T, 0° angle, 3/32" axle - #BSV4832
BSV Gear 48 pitch, 32T, 0° angle, 3/32" axle - #BSV4832
-
PARMA SLOT SPUR GEAR 48 PITCH, 32T, 1/8" axle, (Ø18.17 mm) with hub adaptor 3/32", with screw - #70132
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included
-
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, pinned, Black Diamond coated - #M515
KOFORD Pinion 64 pitch, 8T, 0° angle, 2 mm bore, pinned, Black Diamond coated - #M515
Multiple Nat's winner. Pinned 8T Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.
-
DUBICK Pinion 64 pitch, 9T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #DB502-9
Pinion 64 pitch, 9T , 0° angle, 2 mm bore, brass
This is press-on style pinion gear
-
CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm - CAH#6-AG
CAHOZA GEAR CAHOZA 64 PITCH, 36T, 0° angle, 3/32" axle, Ø15.00 mm glued on 3/32" axle CAHOZA, hub machined to the dia. 3.7 mm
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
KOFORD Pinion 64 pitch, 9T, 0° angle, 2 mm bore, precision & hardened - #M323-9
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
SONIC PINION 64 PITCH, 9T , 0° ANGLE, 2 mm bore - #30-09
SONIC PINION 64 PITCH, 9T , 0° ANGLE, 2 mm bore - #30-09
9 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision.
-
BSV Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.52 mm - #BSV6437
BSV Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.52 mm - #BSV6437
-
CAMEN Pinion 64 pitch, 9T, 0° ANGLE, 2 mm bore - #CMN8001.09
CAMEN Pinion 64 pitch, 9T, 0° ANGLE, 2 mm bore - #CMN8001.09
Ultra Machined solder on Pinion Gears
-
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw- #G637
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw- #G637
37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK42371
-
BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle - #BSV7240332
BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle - #BSV7240332
-
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm - #5B2 (CAH7239)
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm
-
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm, 12 pc - #5B2 (CAH7239)
CAHOZA highly durable gear 72 pitch 39 teeth, 0° angle, 2 mm axle, Ø14.52 mm
-
BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7240332longled
BSV Gear 72 pitch, 40T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7240332longled
Suitable for ES 1/24
-
CAHOZA ES32 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#226
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740
JK GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm, w/screw - #G740
Old catalog #JK7240
-
BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle - #BSV72402
BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle - #BSV72402
-
BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72402longled
BSV Gear 72 pitch, 40T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72402longled
Suitable for ES 1/24
-
S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072
S&K GEAR 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 mm - #SK4072
-
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw, narrow - #G637N
JK GEAR 64 PITCH, 37T, 0° angle, 3/32" axle, Ø15.35 mm, w/screw, narrow - #G637N
37t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4237F
-
CAHOZA Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #6
CAHOZA Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #6
Made by Cahoza, these are - without question - the finest and most accurate Spur Gears offered in the Slot Car World today.
-
CAHOZA Highly Durable Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #8
CAHOZA Highly Durable Gear 64 pitch, 37T, 0° angle, 3/32" axle, Ø15.42 mm - #8
Highly durable polymer gears 64 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on Cahoza roll tester, crash resistant
-
JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m
JK Gear 72 pitch 40 teeth, 0° angle, 2 mm axle, Ø14.65 mm, w/screw - #G740m
Old catalog #JK72402
-
S&K ES32 72 PITCH, 39T, 0° angle, 2 mm axle, Ø14.3 mm, glued on 2 mm KOFORD axle - ZHB#222
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
MS-SLOTPARTS Guide Threader 2.0 Metric Thread
MS-SLOTPARTS Guide Threader 2.0 Metric Thread
Insert the guide, center with the threaded knob and cut lightly the thread into threaded direction. A drop of oil in the cutting, especially in Gugu guides (RedFox), works better.
-
S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G
S&K Gear 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.58 mm. For gluing. - #SK4072G
-
KOLHOZA Body Production 1/24 Ferrari 458 WEC, Lexan .005" (0.125 mm), with paint mask - #0116T
Body Production 1/24 Ferrari 458 WEC
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
CAHOZA GEAR 72 PITCH 40T, 0° angle, 3/32" axle, Ø14.85 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle - #ATT7240
ATTAN Gear 72 PITCH, 40T, 0° angle, 3/32" axle, - #ATT7240
-
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
CAHOZA Drilled gear 72 pitch 40 teeth, 0° angle, 3/32" axle (with reduced weight), Ø14.85 mm - #9
-
S&K 72 PITCH, 40T, 0° angle, 3/32" axle, Ø14.65 мм, glued on 3/32" Proslot axle - ZHB#224
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722
S&K GEAR 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm - #SK40722
-
CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZHB#231
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402
ATTAN Gear 72 pitch 40 teeth, 0° angle, 2 mm axle - #ATT72402
-
CAHOZA ES32 or ES24 glyed gear 72 PITCH 39 teeth (Ø14.52 mm) on 2 mm KOFORD axle - ZHB#228
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA GEAR 72 PITCH 40T, 0° angle, 2 mm. axle, Ø14.8 mm - #5-B-2
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 2 mm axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24
-
JK 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#232
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle - #BSV7241332
-
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled
BSV Gear 72 pitch, 41T, 0° angle, 3/32" axle, with a full hub, for gluing - #BSV7241332longled
Suitable for ES 1/24
-
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, pair - #MID808A
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A
MID AMERICA Premium FISH donuts inside Ø7.62 mm (.300"), outside Ø17.52 mm (.690"), about 31 mm (1.2") width, 10 pairs - #MID808A
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, pair - #MID808B
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø18.29 mm (.720"), about 31 mm (1.2") width, 10 pairs - #MID808B
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair - #MID808C
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C
MID AMERICA Premium FISH donuts inside Ø8.9 mm (.350"), outside Ø22.86 mm (.900"), about 31 mm (1.2") width, pair, 10 pairs - #MID808C
Tiny pores, very firm, super sticky
-
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, pair - #MID808D
MID AMERICA Premium FISH donuts inside Ø10.9 mm (.430"), outside Ø22.09 mm (.870"), about 31 mm (1.2") width, 10 pairs - #MID808D
Fit for 11 mm rims
Tiny pores, very firm, super sticky
-
S&K 72 PITCH, 40T, 0° angle, 2 mm axle, Ø14.65 mm, glued on 2 mm axle KOFORD - ZHB#220
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA glyed 72 PITCH 40T (Ø14.8 mm) gear on 2 mm KOFORD axle - ZHB#221
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
S&K GEAR 72 PITCH, 41T, 0° angle, 3/32" axle, Ø15.00 mm - #SK4172
-
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle - #BSV72412
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle - #BSV72412
-
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72412longled
BSV Gear 72 pitch, 41T, 0° angle, 2 mm axle, with a full hub, for gluing - #BSV72412longled
Suitable for ES 1/24
-
S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722
S&K GEAR 72 PITCH, 41T, 0° angle, 2 mm axle, Ø15.00 mm - #SK41722
-
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm - #SK43802
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm - #SK43802
-
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm, for gluing - #SK43802G
S&K Gear 80 PITCH, 43T, 0° angle, 2 mm axle, Ø14,3 mm, for gluing - #SK43802G
-
JK SPUR GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,28 mm, w/screw - #G843
JK SPUR GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,28 mm, w/screw - #G843
Old catalog #JK4343
-
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm - #SK4380
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm - #SK4380
-
VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P
VITULA GEAR 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,45 mm, for gluing - #003P
-
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm, for gluing - #SK4380G
S&K Gear 80 PITCH, 43T, 0° angle, 3/32" axle, Ø14,3 mm, for gluing - #SK4380G
-
CAHOZA POLYMER GEAR 72 PITCH, 41T, 0° ANGLE, 3/32" AXLE, Ø15.2 mm - #5
POLYMER GEARS 72 PITCH STRAIGHT ELITE
polymer gears 72 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 40, 41 teeth, gears perfect for Eurosport 24 -
RED FOX 80 PITCH 43T, 0° angle, 2 mm axle, Ø14.35 mm glued on 2 mm axle KOFORD - ZHB#203
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m
JK POLYMER GEAR 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm, w/screw - #G844m
Old catalog #JK43442
-
BSV Crown gear 48 pitch 43T, 3/32" axle - #BSVF4843332
BSV Crown gear 48 pitch 43T, 3/32" axle - #BSVF4843332
-
ZHB DIAMOND MAGNET HONE Ø12.30 mm
ZHB DIAMOND MAGNET HONE Ø12.30 mm
-
ZHB DIAMOND MAGNET HONE Ø12.35 mm
ZHB DIAMOND MAGNET HONE Ø12.35 mm
-
InTechno Kit for assembly slot car box "Sportsman Working Place"
InTechno Kit for assembly slot car box "Sportsman Working Place"
-
WRIGHTWAY Diamond tire file - #WW52
WRIGHTWAY Diamond tire file - #WW52
-
KOFORD HIGH TEMPERATURE SOLDER W/FLUX CORE - #M618
High temperature silver solder. Melting point 598F. Ideal for soldering on pinions for G7 motors to prevent spinning.
-
TAYLO RACING ISRA NUMBER STICKERS, height 8 mm, sheet 80 х 130 mm - #007
TayloRacing ISRA NUMBER STICKERS, height 8 mm, sheet 80 х 130 mm - #007
-
TAYLO RACING SPONSOR STICKERS #1, w/cut outline, sheet 167 х 110 mm- #001
TAYLO RACING SPONSOR STICKERS #1, w/cut outline, sheet 167 х 110 mm- #001
-
TAYLO RACING SPONSOR STICKERS #2, w/cut outline, sheet 167 х 110 mm- #002
TAYLO RACING SPONSOR STICKERS #2, w/cut outline, sheet 167 х 110 mm- #002
-
TAYLO RACING SPONSOR STICKERS #3, w/cut outline, sheet 167 х 110 mm- #003
TAYLO RACING SPONSOR STICKERS #3, w/cut outline, sheet 167 х 110 mm- #003
-
TAYLO RACING SPONSOR STICKERS #4, w/cut outline, sheet 167 х 110 mm- #004
TAYLO RACING SPONSOR STICKERS #4, w/cut outline, sheet 167 х 110 mm- #004
-
S&K FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
FRONT RIMS FOR F1/24 MODELS , 1 PAIR - #541
This rims is made for pressing on the axle!
PARAMETERS
- dia.,mm: 14
- width for gluing tires, mm: 13
- total width, mm: 17,9
- dia. of holes for set on axle Ø3/32" (2.36 mm), mm : 2,2
-
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair - #M235
KOFORD Axle ballbearing 3/32" (2.36 mm), narrow width, open, ultralight, pair
-
GRW Premium Precision Balbearing 2 х 5 х 2.3 mm, shielded - #SS682-ZZ
GRW - is a German manufacturer of premium class.
Premium Precision Balbearing 2 х 5 х 2.3 mm, shielded - #SS682-ZZ
-
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
DUBICK Precision Ballbearing 2 х 5 х 2.3 mm, flanged, shielded - #DB607
-
GRW Premium Precision Balbearing 2 х 5 х 2.3 mm, flanged, shielded - #SSF682-ZZ
GRW - is a German manufacturer of premium class.
Premium Precision Balbearing 2 х 5 х 2.3 mm, flanged, shielded - #SSF682-ZZ
-
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
KOFORD Axle ballbearing 3/32" (2.36 mm), ultra premium, shielded, pair - #M217
Ultra Premium shielded rear axle ball bearings, ribbon retainer and ultra precise internal geometry for smooth rotation and the lowest drag. Highest quality steel and ribbon retainer for long life. Made in Switzerland.
-
CAHOZA HIGH TEMPERATURE SILVER SOLDER - #44
new excellent high temperature silver solder with perfect flux core (non corrosive flux), this solder is 94.8% tin and 5.2% silver, diameter 1mm, long 6 feet (1,8m
-
KOLHOZA STAND FOR NEW DONUTS - KZA015
On this stand your can place 17 pairs of new donuts. Used for storage in the orderliness
-
ZHB Desktop mat for work, dimensions 600 x 450 x 2.9 mm (A2 format)
- Size: 600 x 450 x 2.9 mm (A2).
- Thickness: 2.9 mm.
- Colour: green.
- The table mat is made from high durable PVC.
-
ZHB TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
TAP 0-80 (1,52 mm) FOR CUTTING OF AN INCH THREAD IN ENDBELLS
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR06
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR07
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis parts - #IR08
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1/32
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis parts
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, w/drawing of the chassis parts
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 1,5 mm w/foil
- w/drawing of the chassis details
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, w/drawing of the chassis parts
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 2 mm w/out foil
- w/drawing of the chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR09
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24. Full cut details kit, ready for build by rivets - #IR10
KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, full cut details kit, ready for assembly by the rivets
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 1,5 mm w/foil
- full cut details kit, ready for assembly by the rivets
-
ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 2 mm w/out foil, full cut details kit, ready for assembly by the rivets
Parameters:
- Kit for buid chassis: "SUPER-TEAPOT" 1/24 (w/hole to the motor)
- Scale: 1:24
- Thick.: 2 mm w/out foil
- full cut details kit, ready for assembly by the rivets
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART". SHEET 100 x 200 mm, thick. 1,5 mm, w/drawing of chassis details - #IR11
KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart"
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24 "Standart"
- Scale: 1/24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/drawing of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. SHEET 100 x 200 mm, thick. 1,5 mm, w/cut on half depth of chassis details - #IR12
KIT FOR BUILD CHASSIS "TEAPOT" 1/24
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24
- Scale: 1:24
- Sheet: 100 x 200 mm
- Thick.: 1,5
- w/cut on half depth of chassis details
-
INTECHNO KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "STANDART" CLASSIC TYPE. Full cut details kit, ready for build by rivets - #IR13
KIT FOR BUILD CHASSIS "TEAPOT" 1/24 "Standart", Classic type
Parameters:
- Kit for buid chassis: "TEAPOT" 1/24 "Standart", Classic type
- Scale: 1:24
- Full cut details kit, ready for build by rivets
-
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)
-
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #G638
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #G638
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw, narrow - #G638N
JK GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw, narrow - #G638N
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
Old catalog #JK4238F
-
BSV Gear 64 pitch, 38T, 0° angle, 3/32" axle - #BSV6438
BSV Gear 64 pitch, 38T, 0° angle, 3/32" axle - #BSV6438
-
S&K Gear 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm- #SK44802
S&K Gear 80 PITCH, 44T, 0° angle, 2 mm axle, Ø14,6 mm- #SK44802
-
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 mm- #44-2mm
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle, Ø14.5 мм - #44-2mm
-
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm. axle, Ø14.56 mm - #2
POLYMER GEARS 80 PITCH ELITE 2MM AXLE
polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 mm - #BH44-2mm
HORKY GEAR 80 PITCH, 44T, 0° angle, 2mm axle BIG HUB, Ø14.5 мм - #BH44-2mm
-
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm. axle, Ø14.56 mm, HARDER- #2-B
HIGHLY DURABLE GEARS 80 PITCH 2MM AXLE
new highly durable polymer gears 80 pitch, for 2mm axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 44 teeth -
S&K Gear 80 PITCH 43T, 0° angle, 2mm axle, Ø14.3 mm glued on 2 mm axle KOFORD - ZHB#201
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
KOFORD LEAD WIRE RETAINER, 1 pc. - #M324
Lead wire retainer. Prevents lead wire from dragging on track, solders to middle rail.
-
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
RALPH THORNE Chassis skins JK#C26 (JK#C43), green - #C43-006
Green shaded. Made from a special .005" thick high gloss and low friction material. Protects the track and your chassis at the same time. It will also reduce unwanted braid arching which ruins the braids and slows your car down in the process. Each package come with 2 pre-cut peel and stick chassis skins.
-
MOSSETTI PATRIOT CHASSIS CLIP, 1 pc - #MR1051
Retaining Clip (2) – All Chassis
-
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
DUBICK Universal kit for assembling body mounting unit of the "Teapot 1/32" & "Teapot 1/24" models. Includes 4 pre-cut tubes. Suitable for JK clips #9008 or #9010
-
ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB ALUMINUM RIVETS Ø2 * 4 mm, WITH A CONVEX HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
ZHB Brass rivets Ø2 *4.1 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
-
ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB BRASS RIVETS Ø2 * 7 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
ZHB Duralumin rivets Ø2 * 8 mm, with countersunk head for assembling the "TEAPOT" chassis, 50 pcs.
-
ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
ZHB ALUMINUM RIVETS Ø2 * 8 mm, WITH COUNTERSUNK HEAD FOR ASSEMBLING THE "TEAPOT" CHASSIS, 50 pcs.
-
ZHB PRODUCTION 1/32 MODEL KIT IN THE MINIMUM CONFIGURATION
This is a kit of production model 1/32 in the simplest configuration: chassis bronze, 64 pitch, engine without modifications, clips instead of tubes, lexan body.
-
HORKY 2024 ES 1/32 Chassis Assembled without ballbearings (picture can be not actual)
It is delivered under the order
Perhaps a slight change in price, depending on the terms of delivery.
-
NeAn FORMULA 1/24 AGS-Cosworth 1986 body, Lexan, thin .01" (0.25mm) - #47-L
Formula 1/24 AGS-Cosworth 1986
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
-
NeAn FORMULA 1/24 AGS-Cosworth 1986 body, PVC, thin .015" (0.4 mm) - #47-P
Formula 1/24 Body AGS-Cosworth 1986
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
-
ARP PINION 64 PITCH, 9T , 0° ANGLE, 2 mm bore, stainless steel - #ARP6409
ARP PINION 64 PITCH, 9T , 0° ANGLE, 2 mm bore, stainless steel
64 pitch stainless steel 9 tooth pinion gear heat treated to 36-38 hardness
-
HORKY 2024 ES 1/24 chassis assembled without ballbearings (picture can be not actual)
It is delivered to order in the latest available version at the time of order.
-
KOLHOZA FORMULA 1/32 RED BULL BODY, LEXAN, thickness .007" (0.175 mm)
Formula 1/32 RED BULL Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
-
MID AMERICA Dual tip body detailing pen - #MID441
MID AMERICA Dual tip body detailing pen
-
WELLER 2-wire red handle - #7760
WELLER 2-wire red handle - #7760
- Feature cool, "soft touch", acid and flux resistant grips
- Interchangeable heaters and tips for custom applications, maintenance
-
BSV .050” (4-40) Allen wrench w/guide nut tool
BSV .050” (4-40) Allen wrench w/guide nut tool
Allen wrench, from one side tip for .050" (4-40) rims screws, on other side guide nut tool for JK nuts or others
-
WELLER One peace heating element & tip, 45W - #UNG4033S
WELLER One peace heating element & tip, 45W - #UNG4033S
Modular Heater with Long Chisel Tip, 45 Watt, 1000°F
-
KOLHOZA .050" (4-40) ALUMINUM ALLEN WRENCH W/GUIDE NUT TOOL 9 mm - KZA025
.050 wrench and guide nut tool
-
KOFORD SILVER HEAT TRANSFER COMPAUND - M329
Silver heat transfer compound.
Apply between brush and hood on motors to reduce comm temperatures and increase reliability for all classes of racing. Silver will settle over time, mix before using.
-
ALPHA Lead sheet thickness 1 mm, 37х25mm, SELFSTICK- #503
Lead sheet thickness 1 mm, 37 х 25 mm can help you to configure your chassis.
Self stick
-
ZHB Lead sheet thickness 0.5 mm, 100 х 100 mm
Lead sheet thickness 0.5 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
NeAn Clear Formula 1/24 Renault RE 30 1982 body, Lexan, thin .01" (0.25mm) - #48-L
Clear Formula 1/24 Renault RE 30 1982 body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
- Clear body
-
NeAn Clear Formula 1/24 Renault RE 30 1982 body, PVC, thin .015" (0.4 mm) - #48-P
Clear Formula 1/24 Renault RE 30 1982 body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
- Clear body
-
RALPH THORNE Lead wire 20Ga (section 0,52 mm²), grey, 3 m (10 ft) - #RTR-DFLW10
RALPH THORNE Lead wire 20Ga (section 0,52 mm²), grey, 3 m (10 ft) - #RTR-DFLW10
-
KOLHOZA EUROSPORT 1/24 AUDI R15 TDI BODY, LEXAN, thickness .005" (0.125 mm) - #0113LT
EUROSPORT 1/24 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA EUROSPORT 1/24 AUDI R15 TDI BODY, LEXAN, thickness .007" (0.175 mm) - #0113L
EUROSPORT 1/24 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
-
TAYLO RACING PAINT MASK FOR EUROSPORT 1/24 AUDI R15 TDI
The inscriptions and logos are made in a mirror image, which makes it possible to use them as painting masks.
-
NeAn Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body, Lexan, thin .01" (0.25mm) - #49-L
Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
- Clear body
-
NeAn Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body, PVC, thin .015" (0.4 mm) - #49-P
Clear Formula 1/24 Parnelli-Offenhauser 1974 (Indycar) body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
- Clear body
-
WELLER Heating element, 50W - #UNG37
WELLER Heating element, 50W - #UNG37
Modular Heater uses Thread-on Tips, 50 Watt, 1000°F - Fits Handle(s) 7400/7500/7760/7770
-
RALPH THORNE Long tire file grit 240 - #RTR-LTF
RALPH THORNE Long tire file grit 240 - #RTR-LTF
-
ATTAN UNIVERSAL STICKER SHEET #1, w/cut outline, sheet 167 х 110 mm - #UNI 01
ATTAN UNIVERSAL STICKER SHEET #1, w/cut outline, sheet 167 х 110 mm - #UNI 01
-
ZHB DYNAMIC BALANCING OF THE ARMATURE - #101
The price of rebalancing the armature includes a commutator groove.
-
TWP Hex allen wrench .050" - #TWPCHA-002
TWP Hex allen wrench .050" - #TWPCHA-002
-
RALPH THORNE Long tire file dual grit (150/240) - #RTR-LTF
RALPH THORNE Long tire file dual grit (150/240) - #RTR-LTF
Long tires files feature a state of the art coating to get the job done done right. The medium file is 6" long by 1/2" wide.
-
DUBICK Kit for assembly mini-slot car box "Sportsman Working Place" for childrens
DUBICK Kit for assembly mini-slot car box "Sportsman Working Place" for childrens
Parameters:
- Length, mm: 350 (+/- 10-20 mm);
- Width, mm: 210 (+/- 10-20 mm);
- Height, mm: 200 (+/- 10-20 mm);
- + handle for carrying.
-
HAKKO 503 SOLDERING IRON 60W 120V
The Hakko 503F-V12ED/P is a red handled 60 Watt solder iron with an ED6 screwdriver solder tip. This lightweight iron is economical and ideal for both students and hobbyists alike.
For more information you can visit the following link:
-
WELLER Soldering iron 45W, 120 V, w/stand - #W185-1140A
WELLER Soldering iron 45W, 120 V, w/stand
- Weller® Stained Glass Soldering Iron, 45W, 120VNon-temperature Controlled Soldering Iron
- Round, ergonomic soft grip handle for extended use
- Stainless steel heater for long life
- Includes soldering tip and stand
- Available in 2-Wire and 3-wire power cords, 5' Cord length
- Temperature range up to 538 °C
-
WELLER Soldering iron 50W, 120V - #SL500
WELLER Soldering iron 50W, 120V - #SL500
Modular soldering iron with 7760 handle, 37UG heater, PL133 tip
-
WIHA .050" ALLEN WRENCH - #26313
Precision SAE (Inch) Hex Screwdriver 1.27mm (.050") x 40mm
Rotating cap for precise turning and control with fingertip
Precision handle - high quality plastic, cadmium free
Molded on tapered handle allows rapid rotation
High performance blade - CVM steel, hard chrome finished
Tip - precision ground for exact fit, hard chromed non-slip surface
Blade Length: 40mm (1.6") -
JK Phillips Screwdriver for JK#M3 & JK#M6 Motors - #L9
JK Phillips Screwdriver for JK#M3 & JK#M6 Motors - #L9
Old catalog #JK8039
-
ZHB LANE STICKERS, set for race
ZHB LANE STICKERS, set for race
Lane stickers for model, from 1 to 8 lane
-
ZHB Lead sheet thickness 1 mm, 100 х 100 mm
Lead sheet thickness 1 mm, 100 х 100 mm can help you to configure your chassis.
*To fix, you must use glue or double adhesive tape!
-
TayloRacing MAGNET CLEANER
Sticky cleaner for removing chips from magnets. May be kneaded & reused many times.
-
SLICK7 TEFLON ENDBELL SCREW INSULATORS, 6 pcs. - #SL428
Teflon Insulator spacers for Aluminium Endbells, .050 ID x .110 O.D. x .015 Thick
-
NeAn Clear Production 1/32 Porsche 911 GT1 body, Lexan thickness .005" (0.125 mm), w/paint masks — #60-LT
Clear Production 1/32 Porsche 911 GT1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.5 mm - #BSV1610,52
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.5 mm.
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø10.5 mm, (2.37 g. per pair.) - #BSV2010,5
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 10.5 mm;
- 2.37 g. per pair.
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø10.5 mm, w/offset of the hub - #BSV1610,52of
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 10.5 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.410" (10.5 mm) - #MID851
MID AMERICA Carbon fiber rims - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .410" (10.5 mm);
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.410" (10.5 mm), 1 cd. (6 pairs) - #MID851
MID AMERICA Carbon fiber rims, 1 cd. (6 pairs) - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .410" (10.5 mm);
-
S&K PLASTIC RIMS 3/32" axles, width 20 mm, Ø10.5 mm, (1,7 grammes/ pair) - #SK10520
S&K PLASTIC RIMS - #SK10520
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 10.5
- weight per pair, gr/pair: 1,7
-
S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø10.5 mm, ultra light (1,62 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,62
-
DUBICK Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass (This is press-on style pinion gear) - #DB502-10
Pinion 64 pitch, 10T , 0° angle, 2 mm bore, brass
This is press-on style pinion gear!
-
ARP PINION GEAR 64PITCH, 8T , 5° ANGLE, 2 mm bore- #ARP6408A
The best chooise for Production 1/32!
64 pitch stainless steel 8 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
S&K Crown gear, hypoid 72 pitch 30 teeth , offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - S&K#Offset 0.5mm - #SK30722
S&K Crown gear, hypoid 72 pitch 30 teeth , offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - S&K#Offset 0.5mm - #SK30722R
This gear used in Formula 1/32.
But, when you set this gear you need use special tool (tool for set motor on F1 with down offset 0.5 mm)
-
HORKY Crown gear 64-72 pitch 30 teeth, 2 mm axle, Ø13.05 mm, green - HOR#F1-2 mm
This gear used in Formula 1/32
Producer declared 64 pitch, but traditionally we use pinions 72 pitch with this gears
At the same time, how I know, pinions 64 pitch also can work with this gears
-
REDFOX Premium long high performance guide flag, graphite, unthreaded, cut down, low profile - #RFBAGPG
REDFOX Premium long high performance guide flag, graphite, unthreaded, cut down, low profile - #RFBAGPG
RFBAGPG - PREMIUM HIGH PERFORMANCE LONG GUIDE FLAG GRAPHITE
-
PK Eurosport armature PK, windings 19/25, dia. .485", stack .300", 25 degree
PK Eurosport armature
PARAMETERS:
- Wingings: 19/25
- Dia.: 0.485"
- Stack: 0.300"
- 325 degree
-
PK Eurosport armature PK, windings 20/25, dia. .485", stack .300", 25 degree
PK Eurosport armature
PARAMETERS:
- Wingings: 20/25
- Dia.: 0.485"
- Stack: 0.300"
- 325 degree
-
PROSLOT EUROSPORT ARMATURES, PARAMETERS UNDER SPECIAL ORDER
All PARAMETERS under special order
(Write to us to choose what you need)
- Wingings
- Dia.
- Stack
- Long (by ballbearings)
- Advance angle
- Arm.shaft: 1,5mm
(you can fill this form for made special order)
Armatures comes after rebalancing (cost 3$).
-
VALIKO ARMATURE S-arm (ceramic, slotted blue), WINDINGS 19/24-, DIA. 0.485", STACK 0.300", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: S-arm
- Wingings: 19/24-
- Dia.: 0.485"
- Stack: 0.300"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 19/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
VALIKO Armature S-arm (ceramic, slotted blue), windings 22/25, dia. 0.485", stack 0.300", advance angle 28º, balanced, shaft 1.5 mm
-
VALIKO CUSTOM EUROSPORT ARMATURE TYPE S-arm (ceramic slotted blue). All parameters under special order
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Type: S-arm
- Wingings: various
- Dia.: 0.465"...0.472" for F32 arms
- Dia.: 0.478"...0.486" for other ES arms
- Stack: 0.236"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
KOFORD SHORT BIG HEAD BODY PINS (STRAIGHT), 48 psc. in tube - #M545
Short length big head pro body pins. No trimming required! Won't stick past the end of the body mount tube and hang up lead wire or stick marshalls. Ligher weight then long pins. Custom made just for us, the best on the market. 48 pins per package.
-
HORKY 2024 OPEN-12 chassis assembled without ballbearings (picture can be not actual)
It is delivered to order in the latest available version at the time of order.
-
DUBICK Lexan (polycarbonate) for body reinforcement, w/sticky layer 3M, thickness .005" (0.125 mm), size 50x170 mm - #DB2070
Lexan for body reinforcement
Parameters
- Thickness: .005" (0.125 mm)
- Size: 50x170 mm
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .005" (0.125 mm), size 50x240 mm - #DB2070
Lexan for body reinforcement
Parameters
- Thickness: .005" (0.125 mm)
- Size: 50x240 mm
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 1 pc. - #S0102-1
Spacers are precisely CNC turned from brass.
-
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
VITULA 2 mm, .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0102-20
Spacers are precisely CNC turned from brass.
-
NeAn Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body, Lexan, thin .01" (0.25mm) - #50-L
Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .01" (0.25mm)
- Clear body
-
NeAn Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body, PVC, thin .015" (0.4 mm) - #50-P
Clear Formula 1/24 Chaparral 2K Cosworth (Indycar) body
- Made from: Polyvinyl chloride (PVC)
- For: Formula 1/24
- Thickness: .015" (0.4 mm)
- Clear body
-
MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055
MOSSETTI Silicone chassis spacers, 8 pcs. - #MR-1055
Fits all patriot chassis, fits over chassis tube - dampens vibration
-
CAHOZA 3/32" (2.36 mm), .012" (0,3 mm) THICK, BRONZE AXLE SPACER, 24 pcs. - #35
PHOSPHOR BRONZE SPACERS 3/32 phosphor bronze axle spacers, 0,25mm (.01"), very hard but will not stick to magnets, packaged 24 per bag
-
KOLHOZA EUROSPORT 1/24 NISSAN GT-R LM NISMO BODY, Lexan .005" (0.125 mm) - #01144T
EUROSPORT 1/24 Nissan GT-R LM Nismo Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA EUROSPORT 1/24 NISSAN GT-R LM NISMO BODY, Lexan .007" (0.175 mm) - #01144
EUROSPORT 1/24 Nissan GT-R LM Nismo Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
-
CAHOZA Commutator cup, 1 pc. - #150
CAHOZA Commutator cup, 1 pc.
Aluminium hard anodised commutator cups for G7, G27 and Scale armatures.
For using these cups it is needed to mill the commutator to dia 4,72mm (+0,01mm), in length 1,3mm
-
CAHOZA VERTICAL ENDBELL HARDWARE, 1 set - #170
NEW GOLD PLATED VERTICAL HARDWARE
NEW aluminium gold plated vertical hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #171, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm) -
CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32 - #CAH109
CAHOZA GOLD PLATED VERTICAL HARDWARE FOR SPORT 32
NEW aluminium gold plated vertical hardware, high precision.
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-250
ES SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP 10M, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .300" (7.62 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-E10-300
ES SETUP 10 MAGNETS
ISRA 2014 World's champion in class Eurosport 1/32
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .300" (7.62 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOFORD ES SETUP TOOL, outside dia. .620" (15.75 mm), magnets height .430" (10.9 mm), magnets length .250" (6.35 mm), f/armature Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm) - M283-ES-250
ES SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .620" (15.75 mm)
- Magnets height: .430" (10.9 mm)
- Magnets length: .250" (6.35 mm)
- For armature: Ø.480" (12.2 mm) w/out ring or with cut ring (length by ballbearings 18.9 mm)
-
KOLHOZA Body Production 1/24 Ferrari 458 WEC, Lexan .007" (0.175 mm), with paint mask - #0116
Body Production 1/24 Ferrari 458 WEC
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
KOLHOZA Body Production 1/24 Chevrolet Corvette, Lexan .005" (0.125 mm), with paint mask and stickers - #0117T
Body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
KOLHOZA Body Production 1/24 Chevrolet Corvette, Lexan, thickness .007" (0.175 mm), with paint mask and stickers - #0117
Body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
RALPH THORNE Clear body Production 1/24 NSX, Lexan .007" (0.175 mm), with paint mask - #NSX007
- RALPH THORNE Clear body Production 1/24 NSX
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
LARS Clear body Production 1/24 Tesla Model S, Lexan .005" (0.125 mm) - #1
Clear body Production 1/24 Tesla Model S
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn PRODUCTION 1/24 JAGUAR S-TYPE BODY, LEXAN, thickness .007" (0.175 mm), w/paint masks - #70-L
PRODUCTION 1/24 JAGUAR S-TYPE BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- w/paint masks
-
NeAn Clear Production 1/32 Porsche 911 GT1 body, Lexan thickness .007" (0.175 mm), w/paint masks — #60-L
Clear Production 1/32 Porsche 911 GT1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Porsche 911 GT1 body, PVC thickness .008" (0.2 mm), w/paint masks — #60-P
Clear Production 1/32 Porsche 911 GT1 body
- Made from: Polyvinyl chloride (PVC);
- For: Production 1/32;
- Thickness: .008" (0.2 mm);
- Clear body, with paint mask.
-
NeAn Clear Production 1/32 Ferrari 330 P4 body, Lexan thickness .005" (0.125 mm), w/paint masks - #61-LT
Clear Production 1/32 Ferrari 330 P4 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .005" (0.125 mm);
- Clear body, with paint mask.
-
NeAn Clear Production 1/32 Ferrari 330 P4 body, Lexan thickness .007" (0.175 mm), w/paint masks - #61-L
Clear Production 1/32 Ferrari 330 P4 body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0.175 mm);
- Clear body, with paint mask.
-
NeAn Clear Production 1/32 Audi R18 body, Lexan thickness .005" (0.125 mm), w/paint masks - #62-LT
Clear Production 1/32 Audi R18 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Audi R18 body, Lexan thickness .007" (0.175 mm), w/paint masks - #62-L
Clear Production 1/32 Audi R18 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren P1 body, Lexan thickness .005" (0.125 mm), w/paint masks — #63-LT
Clear Production 1/32 McLaren P1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren P1 body, Lexan thickness .007" (0.175 mm), w/paint masks — #63-L
Clear Production 1/32 McLaren P1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
JK Floating body mount set, set of 4. (1 set) - #U63
JK Floating body mount set, set of 4. (1 set) - #U63
-
MID AMERICA Floating pin tibes, improved - #MID288
MID AMERICA Floating pin tibes, improved - #MID288
-
SLICK7 3/32" (2.36 MM), .016" (0.4 MM) THICK, POLYMER AXLE SPACERS, 10 pcs. - #SL7-111
3/32" (2.36 MM), .016" (0.4 MM), POLYMER AXLE SPACERS, 10 pcs.
-
KOFORD Soft magnet cleaning putty - #M724S
Soft magnet cleaning putty.
Soft cleaner for removing chips from magnets. May be kneaded and reused many time. Because material starts out soft it will absorb more chips without becoming too hard.
-
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
DUBICK Diamond tire file (w/big & small grain of diamond) - #767
-
WELLER SOLDERING IRON 41W W/CERAMIC HEATER & STAND (Back order 2-4 weeks)
The most popular soldering iron among European sportsmens. Despite the power of 40 watts, it has excellent performance, reliable and lightweight. The heater is ceramic. Nickel plated tip. Clean only with viscose sponge.
It comes with 2 mm wide tip & stand.
Sorry, this item avialable only for backorder 2-4 week.
-
WELLER Long taper chisel tip - #UNGPL133
WELLER Long taper chisel tip - #UNGPL133
Tip Style Long Taper Chisel
Tip Width O/D .15 in./3.81 mm
Tip Thickness/Height/ I/D .32 in./8.13 mm
Reach/Length 1.06 in./26.92 mm
-
WELLER Сhisel tip - #UNGPL153
WELLER Сhisel tip - #UNGPL153
Tip Style ChiselTip Width O/D .2 in./5.08 mmTip Thickness/Height/ I/D .2 in./5.08 mmReach/Length .56 in./14.22 mm -
TAMIYA DESIGN KNIFE with 30 additional blades- #TAM74020
Special order!
-
TAMIYA 30 ADDITIONAL BLADES FOR DESIGN KNIFE #TAM74020 - #TAM74074
Special order!
Additional blades for TAMIYA DESIGN KNIFE - #TAM74020
-
KOFORD .003" (0,07MM) AXLE SPACING TOOL 3/32 - #M572
003 Side play adjusting tool for 3/32 axles. Allows you to quickly get the perfect side play every time
-
KOFORD SIDE PLAY ADJUSTING TOOL (0.13 MM) - #M388
Side play adjusting tool for the rear axle of non ball bearing cars. Allows you to quickly get the perfect side play every time.
-
DUBUCK Precision Ballbearing 2 х 5 х 2.5 mm, unshielded - #DB605
Ballbearing 2 х 5 х 2.5 mm, unflanged - #DB605
-
ALPHA TUBE FOR ARMATURE, Ø13,5 mm - #RT13.5
TUBE FOR STORAGE ARMATURE, Ø13,5 mm
-
GENERAL ELECTRIC POLYCARBONATE (LEXAN) SHEET, THICK. .005" (0.125 mm), DIM.: 1000 X 1200 mm, running metre
POLYCARBONATE (LEXAN) SHEET
It is possible to cut the lexan into the dimensions you need
Parameters:
- Thick: .005" (0.125 mm)
- Dimension: 1000 x 1200 mm
- running metre
-
GENERAL ELECTRIC POLYCARBONATE (LEXAN) SHEET, THICK. .007" (0.175 mm), DIM.: 1000 X 1200 mm, running metre
POLYCARBONATE (LEXAN) SHEET
It is possible to cut the lexan into the dimensions you need
Parameters:
- Thick.: .007" (0.175 mm)
- Dimension: 1000 x 1200 mm
- running metre
-
PARMA HOME SET LUBE-USE ON PLASTIC - #700
Convenient 2 oz. syringe style applicator is a "must have" item for every tool box. White, zero friction lube is great for plastic gears, bushings and much more. Designed for plastic homeset cars, but can be used on any slot car with great results.
-
ATTAN UNIVERSAL STICKER SHEET #2, w/cut outline, sheet 167 х 110 mm - #UNI 02
ATTAN UNIVERSAL STICKER SHEET #2, w/cut outline, sheet 167 х 110 mm - #UNI 02
-
ATTAN UNIVERSAL STICKER SHEET #3, w/cut outline, sheet 167 х 110 mm - #UNI 03
ATTAN UNIVERSAL STICKER SHEET #3, w/cut outline, sheet 167 х 110 mm - #UNI 03
-
VOKI Armature paint – 2ml - #045P
VOKI Armature paint – 2ml - #045P
-
VOKI Armature paint + refil (2 + 5ml) - #045P+R
VOKI Armature paint + refil (2 + 5ml) - #045P+R
-
PARMA 16D CAN BUSHINGS (2x6 mm) - #500J
Made from powder bronze. Replacement for all 16D motor cans
-
PROSLOT Euro MK1 Motor - 37.000+ rpm - #PS-4001
PROSLOT Euro MK1 Motor - 37.000+ rpm
160/gm-cm, 300mA, standard with 60 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing. CW or CCW rotation
-
PROSLOT ENDBELL KIT FOR PROSLOT C-CANS, W/BRUSH HOODS - #PS643
Complete Endbell Kit - includes endbell, hardware, spring cups, oilite and screws
-
NeAn Clear Production 1/32 McLaren P1 body, PVC thickness .008" (0.2 mm), w/paint masks — #63-P
Clear Production 1/32 McLaren P1 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
NeAn PRODUCTION 1/24 JAGUAR S-TYPE BODY, PVC, thickness .008" (0.2 mm), w/paint masks - #70-P
PRODUCTION 1/24 JAGUAR S-TYPE BODY
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .008" (0.2 mm)
- w/paint masks
-
NeAn PRODUCTION 1/24 ALFA ROMEO BODY, LEXAN, thickness .007" (0.175 mm), w/paint masks - #71-L
PRODUCTION 1/24 ALFA ROMEO BODY
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- w/paint masks
-
NeAn PRODUCTION 1/24 ALFA ROMEO BODY, PVC, thickness .008" (0.2 mm), w/paint masks - #71-P
PRODUCTION 1/24 ALFA ROMEO BODY
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness: .008" (0.2 mm)
- w/paint masks
-
NeAn Clear body Production 1/24 Ford Coupe 1933 Hot Rod, Lexan .005" (0.125 mm) - #72-LT
Clear body Production 1/24 Ford Coupe 1933 Hot Rod
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ford Coupe 1933 Hot Rod, Lexan .007" (0.175 mm) - #72-L
Clear body Production 1/24 Ford Coupe 1933 Hot Rod
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Ford Coupe 1933 Hot Rod, Lexan .01" (0.25 mm) - #72-LD
Clear body Production 1/24 Ford Coupe 1933 Hot Rod
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 KTM X-BOW GT-4, Lexan .005" (0.125 mm) - #73-LT
Clear body Production 1/24 KTM X-BOW GT-4
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 KTM X-BOW GT-4, Lexan .007" (0.175 mm) - #73-L
Clear body Production 1/24 KTM X-BOW GT-4
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 KTM X-BOW GT-4, Lexan .01" (0.25 mm) - #73-LD
Clear body Production 1/24 KTM X-BOW GT-4
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .01" (0.25 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Chevrolet Corvette, Lexan .005" (0.125 mm) - #151-LT
Clear body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Chevrolet Corvette, Lexan .007" (0.175 mm) - #151-L
Clear body Production 1/24 Chevrolet Corvette
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Porsche 911 GT1, Lexan .005" (0.125 mm) - #152-LT
Clear body Production 1/24 Porsche 911 GT1
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear Production 1/32 McLaren 650S GT3 body, Lexan thickness .005" (0.125 mm), w/paint masks - #64-LT
Clear Production 1/32 McLaren 650S GT3 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren 650S GT3 body, Lexan thickness .007" (0.175 mm), w/paint masks — #64-L
Clear Production 1/32 McLaren 650S GT3 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 McLaren 650S GT3 body, PVC thickness .008" (0.2 mm), w/paint masks — #64-P
Clear Production 1/32 McLaren 650S GT3 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
NeAn Clear body Production 1/24 Porsche 911 GT1, Lexan .007" (0.175 mm) - #152-L
Clear body Production 1/24 Porsche 911 GT1
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .005" (0.125 mm), w/paint masks - #65-L-5
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .007" (0.175 mm), w/paint masks - #65-L-7
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .01" (0.25 mm), w/paint masks - #65-L-10
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .01" (0.25 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, Lexan thickness .015" (0.38 mm), w/paint masks - #65-L-15
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .015" (0.38 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Glickenhaus SCG 007 body, PVC thickness .008" (0.2 mm), w/paint masks - #65-P
NeAn Clear Production 1/32 Glickenhaus SCG 007 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
BSV Plastic Pinion 64 pitch, 10T, 0° ANGLE, 2 mm bore - #BSVP6410
BSV Plastic Pinion 64 pitch, 10T, 0° ANGLE, 2 mm bore - #BSVP6410
Made from plastic
-
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
HORKY PINION 72 PITCH, 6T, EDM, 0° angle, 1.5 mm bore (FOR F1/32)
-
ARP PINION 72 PITCH, 7T, 0° angle, 1.5 mm bore (FOR F1/32) - #ARP7207-1,5 mm
Same as 7207 execpt for 1.5mm shaft instead of standard 2mm - 72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.5 mm bore, EDM - #13
-
DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-9
DUBICK PINION GEAR 48 PITCH, 9T, 2 mm bore, BRASS
This is press-on style pinion gear
-
BSV Pinion gear 48 pitch, 9T, 0° angle, 2 mm bore, STEEL - #BSV489
BSV Pinion gear 48 pitch, 9T, 0° angle, 2 mm bore, STEEL - #BSV489
-
NeAn Clear Production 1/32 Intrepid RM 1 body, Lexan thickness .005" (0.125 mm), w/paint masks - #66-L-5
NeAn Clear Production 1/32 Intrepid RM 1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Intrepid RM 1 body, Lexan thickness .007" (0.175 mm), w/paint masks - #66-L-7
NeAn Clear Production 1/32 Intrepid RM 1 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn Clear Production 1/32 Intrepid RM 1 body, PVC thickness .008" (0.2 mm), w/paint masks - #66-P
NeAn Clear Production 1/32 Intrepid RM 1 body
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness: .008" (0.2 mm)
- Clear body, with paint mask
-
KOFORD Graphite guide, standart profile, no threads, 1 pc - #M699
KOFORD Graphite guide, standart profile, no threads, 1 pc - #M699
-
KOFORD Graphite guide, standart profile, no threads, 1 cd. (6 pcs.) - #M699
KOFORD Graphite guide, standart profile, no threads, 1 cd. (6 pcs.) - #M699
-
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips - #U68SC
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips - #U68SC
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight, w Soldered On Clips
-
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips 30 sm (12,5") - #U68DSC
JK Lead wire 20Ga (section 0,52 mm²), purple, with soldered on clips 30 sm (12,5") - #U68DSC
Drag Lead Wire 20AWG High Purity, High Current Copper, with Soldered On Clips 12.5"
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
JK Lead wire 20Ga (section 0,52 mm²), purple, 3 m (10 ft) - #U68-10
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (10 ft)
-
JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50
JK Lead wire 20Ga (section 0,52 mm²), purple, 15.2 m (50 ft) - #U68-50
Racing Lead Wire, 20AWG Ultra-Fine 0.05mm, Lightweight (50 ft)
-
MID AMERICA Lead wire 20Ga (section 0,52 mm²), clear, 3 m (10 ft.) - #MID143
MID AMERICA Lead wire 20Ga (section 0,52 mm²), clear, 3 m (10 ft.)
Ultraflex lead wire
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, w/clips, 1 pr. - #M430
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner. With clips
-
TURNIGY Lead wire 18Ga (section 0,82 mm²), black, 1 m (3 ft.)
TURNIGY Lead wire 18Ga (section 0,82 mm²), black, 1 m (3 ft.)
-
TURNIGY Lead wire 18Ga (section 0,82 mm²), red, 1 m (3 ft.), insulation diameter .091" (2,32 mm)
TURNIGY Lead wire 18Ga (section 0,82 mm²), red, 1 m (3 ft.), insulation diameter .091" (2,32 mm)
-
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.) - #M431
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 1 m. (3 ft.)
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Three foot length of our 413 strand light weight ultraflex lead wire
-
JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S
JK PINION GEAR 48 PITCH, 9T , 2 mm bore, STEEL - #P49S
48 pitch 9 tooth solder on pinion
Old catalog #JK4209
-
PROSLOT Euro MK1 Motor - 47.000+ rpm - #PS-4002
PROSLOT Euro MK1 Motor - 47.000+ rpm
160/gm-cm, 950mA, standard with 90 degree springs. Designed for 1/32 and 1/24 Scale - Home, Club and Commercial Racing
-
ALPHA TUBE FOR ARMATURE, Ø15,5 mm - #RT15.5
TUBE FOR STORAGE ARMATURE, Ø15,5 mm
-
KELLY Big armatures tubes, 1 cd. (4 pcs.) - #KE959
KELLY Big armatures tubes, 1 cd. (4 pcs.) - #KE959
BIG Arm Tubes for storing Armatures - 4 per pack fits new larger diameter arms
-
KOFORD RECTANGULAR MOTOR BOX WITH FOAM, plastic, 1 pc. - #603
Motor Boxes with 2 piece yellow foam
-
RALPH THORNE Rectangular motor box, plastic w/foam insert - #RTR-MB
RALPH THORNE Rectangular motor box, plastic w/foam insert
Motor storage case with a snap tight lid and foam insert. The foam will be yellow or red.
-
KOLHOZA DIAMOND DONUT DRILL 10MM DIA - KZA016
Diamond Donut drill 10 mm diameter - For opening up the hole on raw tire donuts.
-
NeAn GM SISU BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #81-P
GM 1/24 SISU Body
- Made from: Polyvinyl chloride (PVC)
- For: GM (Truck)
- Thickness: .015" (0.4 mm)
- w/interior &
- w/paint masks
-
BPA Clear Production 1/32 Porsche 911 GT2 body, Lexan thickness .005" (0.125 mm), w/paint masks - #K 007
Clear Production 1/32 Porsche 911 GT2 body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
BPA Clear Production 1/32 Toyota GT Four body, Lexan thickness .005" (0.125 mm), w/paint masks - #K 034
Clear Production 1/32 Toyota GT Four body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
BPA Clear Production 1/32 DTM GB body, Lexan thickness .005" (0.125 mm), w/paint masks - #K 089
Clear Production 1/32 DTM GB body
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness: .005" (0.125 mm)
- Clear body, with paint mask
-
NeAn Clear body Production 1/24 Saleen, Lexan .005" (0.125 mm) - #153-LT
Clear body Production 1/24 Saleen
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Production 1/24 Saleen, Lexan .007" (0.175 mm) - #153-L
Clear body Production 1/24 Saleen
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, w/paint masks
-
RALPH THORNE Clear Body Production 1/24 BMW Production, Lexan .007" (0.175 mm) - #RTR-1291
RALPH THORNE Clear Body Production 1/24 BMW Production, Lexan .007" (0.175 mm) - #RTR-1291
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
NeAn GM FORD GARGO BODY, PVC, thickness .015" (0.4 mm), w/interior & w/paint masks - #82-P
GM 1/24 Ford Cargo Body
- Made from: Polyvinyl chloride (PVC)
- For: GM (Truck)
- Thickness: .015" (0.4 mm)
- w/interior &
- w/paint masks
-
JK GM SUPER TRUCK-TATRA BODY, Lexan, thickness .01" (0.25 mm) - #B140B
GM 1/24 SUPER TRUCK-TATRA Body - #B140B
- Made from: Polycarbonate (Lexan)
- For: GM (Truck)
- Thickness: .01" (0.25 mm)
Old catalog #JK7402B
-
BPA Clear body Production 1/24 Volvo S60 R (ISRA 2012), lexan, thickness .007" (0.175 mm) - #K 061
BPA Clear body Production 1/24 Volvo S60 R LEGAL FOR ISRA 2012
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
BPA Clear body Production 1/24 HONDA CUP, lexan, thickness .007" (0.175 mm) - #K 078
Clear body Production 1/24 HONDA CUP
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
BPA Clear body Production 1/24 Toyota coupe (ISRA 2013), lexan, thickness .007" (0.175 mm) - #K 087
Clear body Production 1/24 Toyota coupe LEGAL FOR ISRA 2013
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
- Clear body, with paint mask
-
JK GM SUPER TRUCK-Caterpillar body, Lexan, thickness .01" (0.25 mm) - #B141B
GM SUPER TRUCK-Caterpillar body
- Made from: Polycarbonate (Lexan)
- For: GM (Truck)
- Thickness: .01" (0.25 mm)
Old catalog #JK7403B
-
NeAn Clear body Formula 1/32 Williams F1, Lexan .005" (0.125 mm) - #90-LT
Clear body Formula 1/32 Williams F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Formula 1/32 Williams F1, Lexan .007" (0.175 mm) - #90-L
Clear body Formula 1/32 Williams F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Formula 1/32 McLaren F1, Lexan .005" (0.125 mm) - #91-LT
Clear body Formula 1/32 McLaren F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Formula 1/32 McLaren F1, Lexan .007" (0.175 mm) - #91-L
Clear body Formula 1/32 McLaren F1
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER, PVC, thickness 0.2 mm - #101-P
INTERIOR FOR "TEAPOT" 1/24 BODIES, W/SAFETY CAGE AND FIRE EXTINGUISHER
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24
- Thickness, mm: 0,2
- w/with safety cage and fire extinguisher
-
NeAn INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA, Lexan, thickness 0.125 mm - #102-L
INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA
-
ZHB PAINT MASK FOR BODY
ZHB PAINT MASK FOR BODY
-
TAMIYA PS-1 WHITE - #TAM86001
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-2 RED - #TAM86002
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-3 LIGHT BLUE - #TAM86003
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-4 BLUE - #TAM86004
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-5 BLACK - # TAM86005
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-6 YELLOW - #TAM86006
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-7 ORANGE - #TAM86007
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-8 LIGHT GREEN - #TAM86008
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-9 GREEN - #TAM86009
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-10 PURPLE - #TAM86010
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-11 PINK - #TAM86011
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-12 SILVER - #TAM86012
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-13 GOLD - #TAM86013
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-14 COPPER - #TAM86014
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-15 METALLIC RED - TAM86015
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-16 METALLIC BLUE - #TAM86016
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-17 METALLIC GREEN - #TAM86017
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-18 METALLIC PURPLE - #TAM86018
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-19 CAMEL YELLOW - #TAM86019
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIAY PS-20 FLOURESCENT RED - #TAM86020
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-21 PARK GREEN - #TAM86021
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-22 RACING GREEN - #TAM86022
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-23 GUN METAL - #TAM86023
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-24 FLUORESCENT ORANGE - #TAM86024
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-25 BRIGHT GREEN - #TAM86025
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
NeAn INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA, PVC, thickness 0.2 mm - #102-P
INTERIOR W/ENGINE COMPARTMENT FOR "TEAPOT" 1/24 BODY SPANO GTA
- Made from: Polyvinyl chloride (PVC)
- For: "TEAPOT" 1/24 body Spano GTA
- Thickness, mm: 0,2
w/engine compartment
-
CAHOZA HORIZONTAL ENDBELL HARDWARE, 1 set - #171
NEW GOLD PLATED HORIZONTAL HARDWARE
NEW aluminium gold plated horizontal hardware, high precision, this hardware have got larger cooling surface, deeper brush slots, another novelty is an upper little hook that ensures hardware won't tear off the endbell, hole pattern is the same as with #170, attention: before pressing the little hook to its final position, it is needed to grind out the layer of gold and nickel from upper side of the hook (0,05mm-0,1mm -
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108
CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32
NEW aluminium gold plated horizontal hardware, high precision.
-
BSV CROWN GEAR 72 pitch, 30 teeth, 3/32" axle, black - #BSVF7230
BSV CROWN GEAR 72 pitch, 30 teeth, 3/32" axle, black - #BSVF7230
-
MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056
MOSSETTI Chassis damping foam 1/16" thick - 3M adhesive back - fine cell - 2" x 3" - #MR-1056
Chassis dampening foam - 1/16" thick with 3m adhesive back fine cell 2" x 3"
-
B52 Screw 4/40" hollow in rims & gears, .050" hex setscrews, short, made from hardness steel, 1 pc.
B52 Screw 4/40" hollow in rims & gears, .050" hex setscrews, short, made from hardness steel, 1 pc.
Weight 0,03 g.
-
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
-
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #886
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 50 pcs. - #886
-
WRIGHTWAY Motor screw 0/80", phillips head, stainless steel, 1 pc. - #WWPS
WRIGHTWAY Motor screw 0/80", phillips head, stainless steel, 1 pc. - #WWPS
-
TAYLO RACING LIGHTNING BOLT PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #1
TAYLO RACING LIGHTNING BOLT PAINT MASKS, sheet 90 х 120 мм (mounting film included)
-
TAYLO RACING PENTAGON AND 4 PT. STARS, sheet 90 х 120 мм (mounting film included) - #2
TAYLO RACING PENTAGON AND 4 PT. STARS, sheet 90 х 120 мм (mounting film included) - #2
-
TAYLO RACING LARGE GRID PAINT MASK, sheet 90 х 120 мм (mounting film included) - #3
TAYLO RACING LARGE GRID PAINT MASK, sheet 90 х 120 мм (mounting film included) - #3
-
TAYLO RACING SMALL GRID PAINT MASK, sheet 90 х 120 мм (mounting film included) - #4
TAYLO RACING SMALL GRID PAINT MASK, sheet 90 х 120 мм (mounting film included) - #4
-
TAYLO RACING STARS ARROWS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #5
TAYLO RACING STARS ARROWS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #5
-
TAYLO RACING DOTS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #6
TAYLO RACING DOTS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #6
-
TAYLO RACING PAINT MASK, sheet 90 х 120 мм (mounting film included) - #7
TAYLO RACING PAINT MASK, sheet 90 х 120 мм (mounting film included) - #7
-
TAYLO RACING DRIPS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #8
TAYLO RACING DRIPS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #8
-
TAYLO RACING SAW BLADE PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #9
TAYLO RACING SAW BLADE PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #9
-
TAYLO RACING BELARUS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #10
TAYLO RACING BELARUS PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #10
-
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #11
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #11
-
TAYLO RACING HAND & FOOT PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #12
TAYLO RACING HAND & FOOT PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #12
-
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #13
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #13
-
TAYLO RACING SQUIGGLE PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #14
TAYLO RACING SQUIGGLE PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #14
-
TAYLO RACING SKULL PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #15
TAYLO RACING SKULL PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #15
-
TAYLO RACING SMALL FLAME PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #16
TAYLO RACING SMALL FLAME PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #16
-
TAYLO RACING FLAME PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #17
TAYLO RACING FLAME PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #17
-
TAYLO RACING FLAME PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #18
TAYLO RACING FLAME PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #18
-
TAYLO RACING LONG DRIP PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #19
TAYLO RACING LONG DRIP PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #19
-
TAYLO RACING DRIPS AND WAVE PAINT MASK, sheet 90 х 120 мм (mounting film included) - #20
TAYLO RACING DRIPS AND WAVE PAINT MASK, sheet 90 х 120 мм (mounting film included) - #20
-
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #21
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #21
-
TAYLO RACING SM LIGTNING BOLT PAINT MASK, sheet 90 х 120 мм (mounting film included) - #22
TAYLO RACING SM LIGTNING BOLT PAINT MASK, sheet 90 х 120 мм (mounting film included) - #22
-
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #23
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #23
-
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #24
TAYLO RACING PAINT MASKS, sheet 90 х 120 мм (mounting film included) - #24
-
TAYLO RACING PAINT MASK, sheet 90 х 120 мм (mounting film included) - #25
TAYLO RACING PAINT MASK, sheet 90 х 120 мм (mounting film included) - #25
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, Lexan, thickness 0.125 mm - #103-L
INTERIOR FOR PRODUCTION 1/24 BODIES
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, PVC, thickness 0.2 mm - #103-P
INTERIOR FOR PRODUCTION 1/24 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness, mm: 0,2
-
ATTAN Sauber C34 Ferrari 2015 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN RENAULT F1 R30 2010 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN RENAULT F1 R30 2010 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN RENAULT F1 R30 2010 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN Minardi M02 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN CATERHAM F1 CTO1 2012 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN CATERHAM F1 CTO1 2012 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN CATERHAM F1 CTO1 2012 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN Onyx - ORE 1/2 1990 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN SCUDERIA FERRARI F1 38 2013 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN SCUDERIA FERRARI F1 38 2013 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN SCUDERIA FERRARI F1 38 2013 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN Jaguar Racing F1 R3 2003 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN Brawn BGP F1 001 2009 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN BRAWN BGP F1 001 2009 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN Brawn BGP F1 001 2009 STICKERS, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN McLaren Honda MP 4/6 1992 STICKER, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN RED BULL RACING F1 RB8 2012 STICKER, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
ATTAN McLaren Ford M23 1976 sticker, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
ATTAN McLaren Ford M23 1976 sticker, sheet for 4 bodies, w/cut outline, sheet 167 х 110 mm
-
PROSLOT GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm, w/screw- #680-38
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
TAYLO RACING SPONSOR STICKERS #5, w/cut outline, sheet 167 х 110 mm- #005
TAYLO RACING SPONSOR STICKERS #5, w/cut outline, sheet 167 х 110 mm- #005
-
S&K 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#204
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 44T, 0° angle, 2mm axle, Ø14.6 mm glued on 2 mm axle KOFORD - ZHB#205
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
HORKY CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32
CROWN GEAR 64-72 pitch, 30 teeth, 3/32" axle, Ø13.05 mm, green - #F1-32
Manufacturer says, that this is 64 pitch, but we (traditionally:)) use it with 72 pitch pinions.
At the same time, how I know, 64 pitch pinions could also work with this gears.
-
JK Controller Frame, Anodized Aluminum Black - #N20
JK Controller Frame, Anodized Aluminum Black - #N20
Old catalog #JK80812
-
DUBICK Precision Ballbearing 2 х 6 х 2,3 mm, unflanged - #DB606
DUBICK Precision Ballbearing 2 х 6 х 2,3 mm, unflanged - #DB606
-
MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1060
3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair
“Really Cool Bushings”-With “Internal Oil Channel” -3/32” Axle Bushings (pr). These are a direct fit for 4.5” Front Axle positioning – Can also be used for Rear axle positioning with fore/aft and up/down
-
MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1061A
MOSETTI 3/32" x 3/16" (2.36 x 4.75 mm) "Really cool bushings" with internal oil channel axle bushings, pair - #MR1061A
Fits directly into chassis
-
PROSLOT Euro MK1 Motor blue printed sealed with american made armature - #PS-4002B
PROSLOT Euro MK1 motor blue printed sealed
Euro MK 1 Motor - with American made PD (Puppy Dog) armature as used in retro can am racing
-
PROSLOT Euro MK 1 Motor with American made X12 armature 40* - #PS-4002-12
Euro MK 1 Motor with American made X12 armature 40* CW Rotation
-
TAMIYA PS27 FLUORESCENT YELLOW - #TAM86027
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS28 FLUORESCENT GREEN - #TAM86028
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS29 FLUORESCENT PINK - #TAM86029
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS30 BRILLIANT BLUE - #TAM86030
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS31 SMOKE - #TAM86031
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-32 CORSA GRAY - #TAM86032
These spray paints were developed especially for decorating transparent polycarbonate bodies used in R/C car modeling. Each can contains 100ml of paint, which is the appropriate amount for finishing a model. Paint the body from the inside, keeping the can about 30cm from the surface. After curing, apply another coat. These paints are impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. Never use these paints on plastic models.
-
PROSLOT C-Can assembled endbell (w/copper hardware) - #PS618
PROSLOT C-Can assembled endbell w/copper hardware aligned and honed - undrilled - #PS618
-
PARMA CONTROLLER HANDLE BOLT SET, 3 pcs. - #361
One set of replacement hardware for all controllers handles
-
ZHB Precision Ballbearing 2 х 6 х 3 mm, shielded - #2x6х2,5
Ballbearing 2 х 6 х 3 mm, shielded - #2x6х2,5
-
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
JK AXLE Ballbearing 3/16" х 3/32" (4.76 х 2.36 mm) flanged shielded, 5 balls, pair - #U70
-
JK CONTROLLER HANDLE BOLT SET - #JK80819
JK CONTROLLER HANDLE BOLT SET - #JK80819
Set of Controller handle screws
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.433" (11 mm) - #R3I
JK Plastic rims - #R3I
- For 3/32" axle;
- Width 20 mm;
- Dia. .433" (11 mm).
-
HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
PROSLOT X-12 ARM DIA .513", 38 DEGREE - #PS-701-38
Box Stock X12 .513 38 degrees on M Blank
-
PROSLOT X-12 ARM DIA .513", 42 DEGREE - #PS-701-42
You can order any degree of advance.
Box Stock X12 .513 42 degrees on M Blank
-
PARMA SLOT SPUR GEAR 48 PITCH, 33T, 1/8" axle, (Ø18.73 mm) with hub adaptor 3/32", with screw - #70133
48 pitch spur for 1/8" axle - Slot Sprocket Spur Gears feature light weight, less friction and great gear mesh. They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 4 pcs. - #M256-4
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws
-
KOLHOZA AXLE CHECKER MACHINE - KZA017
Check to make sure your axles are perfectly straight
-
ZHB DIAMOND MAGNET HONE Ø12.82 mm
ZHB DIAMOND MAGNET HONE Ø12.82 mm
-
LUCKY BOB ARM DYE-GREEN - #1072G
ARM DYE GREEN
-
LUCKY BOB Arm dye - blue - #1073B
LUCKY BOB Arm dye - blue - #1073B
-
TAYLO RACING PAINT MASK FOR EUROSPORT 1/24 NISSAN GT-R LM NISMO
The inscriptions and logos are made in a mirror image, which makes it possible to use them as painting masks.
-
KOLHOZA EUROSPORT 1/32 AUDI BODY, LEXAN, thickness .007" (0.175 mm) - #653-L
EUROSPORT 1/32 Audi R15 TDI Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Special order!
-
PARMA FLAME STRIPES MASK, sheet 205 х 290 mm - #10662
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA BIG FLAMES PAINT MASK, sheet 205 х 290 mm - #10667
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA WAVES AND DRIPS PAINT MASK, sheet 205 х 290 mm - #10751
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA SCALLOPS PAINT MASK, sheet 205 х 290 mm - #10784
Available by pre-order
-
PARMA PAINT MASK FLAMES, sheet 205 х 290 mm - #10786
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA Ford Mondeo Headlight Decal / Sticker Sheet, sheet 75 х 150 mm - #10789
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA SPLASH DESIGN PAINT MASK, sheet 205 х 290 mm - #10794
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA GRAPHIC PAINT MASK, sheet 205 х 290 mm - #10795
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA CHECKERED FLAG MASK, sheet 205 х 290 mm - #10797
Only for order
-
PARMA CHAINS PAINT MASK, sheet 205 х 290 mm - #10806
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA SPIKES DESIGN PAINT MASK, sheet 205 х 290 mm - #10807
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA TIGGER STRIPES AND RIPS PAINT MASK, sheet 205 х 290 mm - #10809
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA BIG DRIP DESIGN PAINT MASK, sheet 205 х 290 mm - #10811
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA INCA DESIGN PAINT MASK, sheet 205 х 290 mm - #10813
Available by pre-order
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA AZTEC DESIGN PAINT MASK, sheet 205 х 290 mm - #10814
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA DERANGEMENT DESIGN PAINT MASK, sheet 205 х 290 mm - #10816
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA AGGRAVATION DESIGN PAINT MASK, sheet 205 х 290 mm - #10823
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA SHOCK DESIGN PAINT MASK, sheet 205 х 290 mm - #10824
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA FIRE AND ICE DESIGN PAINT MASK, sheet 205 х 290 mm - #10825
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA LONG DRIP DESIGN PAINT MASK, sheet 205 х 290 mm - #10826
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA PHAT NASTY FLAMES DESIGN PAINT MASK, sheet 205 х 290 mm - #10828
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA GHOST FLAME DESIGN PAINT MASK , sheet 205 х 290 mm - #10830
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA DEVIL TAIL FLAMES MASKS, sheet 205 х 290 mm - #10831
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA OUTLINED FLAME MASK, sheet 205 х 290 mm - #10832
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA MEDIVAL FLAMES PAINT MASK, sheet 205 х 290 mm - #10833
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA SLAYER PAINT MASK, sheet 205 х 290 mm - #10834
Available by pre-order
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA TRIBAL FLAME PAINT MASK, sheet 205 х 290 mm - #10835
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA SWOOP DESIGN PAINT MASK, sheet 205 х 290 mm - #10837
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA LONG LICKS FLAME DESIGN PAINT MASK, sheet 205 х 290 mm - #10839
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA FAST FLAMES PAINT MASK, sheet 205 х 290 mm - #10841
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA FAST SPLASH PAINT MASK, sheet 205 х 290 mm - #10842
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
-
PARMA FAST CHOPS PAINT MASK, sheet 205 х 290 mm - #10844
FEATURES: This is a sheet of pre-cut paint mask designs. They are made of a durable vinyl like decal material. These mask resist paint bleed through. Self adheisive backed-just peel and stick. Will stick to most plastic and lexan materials. Absolutley no cutting needed INCLUDES: One sheet of pre-cut paint masks 11" x 7-7/8" (205 х 290 mm)
Available by pre-order
-
PARMA MINI-T FLAMES PAINT MASK, sheet 140 х 220 mm - #60025
1/18 Flames Paint Mask - 5" x 8" (140 х 220 mm) - Pre-cut stretchy vinyl paint masks for custom paint jobs. Includes clear transfer tape for quick prep.
-
PARMA MINI-T DEVIL TAIL PAINT MASK, sheet 140 х 220 mm - #60026
1/18 Devil Tail Paint Mask - 5" x 8" - Pre-cut stretchy vinyl paint masks for custom paint jobs. Includes clear transfer tape for quick prep.
-
PARMA MINI-T DRIP DESIGN PAINT MASK, sheet 140 х 220 mm - #60027
1/18 Drip Paint Mask - 5" x 8" (140 х 220 mm )- Pre-cut stretchy vinyl paint masks for custom paint jobs. Includes clear transfer tape for quick prep
-
PARMA FLAMES SLOT PAINT MASKS, sheet 140 х 220 mm - #785
5.5" x 8.5" stretchy vinyl paint masks make custom paint jobs fast and easy! Great for slot cars, model cars, pinewood cars, etc. Does not include clear transfer tape (Order PARMA #10783 Clear Transfer Tape or can be transfered with PARMA FASTAPE). Most can be applied without any application tape using a hobby knife, but Big Drips for example, would be easier to transfer if all pieces at once.
-
ZHB DIAMOND MAGNET HONE Ø 0.540"
ZHB DIAMOND MAGNET HONE Ø12.85 mm
-
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
KOFORD Pinion 64 pitch, 10T, 0° angle, 2 mm bore, precision & hardened - #M323-10
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
SONIC PINION 64 PITCH, 10T , 0° ANGLE, 2 mm bore - #30-10
SONIC PINION 64 PITCH, 10T , 0° ANGLE, 2 mm bore - #30-10
10 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision.
-
S&K FRONT WHEELS FOR F 1/32, Ø14,5 mm, pair
FRONT WHEELS FOR F 1/32, Ø14,5 mm, pair
Replacement pair of front wheels for formula 1/32 chassis
-
DUBICK PINION GEAR 48 PITCH, 10T, 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-10
DUBICK PINION GEAR 48 PITCH, 10T, 2 mm bore, BRASS
This is press-on style pinion gear
-
BSV Pinion gear 48 pitch, 10T, 0° angle, 2 mm bore, PLASTIC- #BSVP4810
BSV Pinion gear 48 pitch, 10T, 0° angle, 2 mm bore, PLASTIC- #BSVP4810
-
BSV Gear 48 pitch, 35T, 0° angle, 3/32" axle - #BSV4835
BSV Gear 48 pitch, 35T, 0° angle, 3/32" axle - #BSV4835
-
BSV Gear 64 pitch, 37T, 16° angle, 3/32" axle, Ø15.49 mm
BSV Gear 64 pitch, 37T, 16° angle, 3/32" axle, Ø15.49 mm
-
ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316
ATTAN GEAR 72 PITCH 43T, 16° angle, 3/32" axle - #ATT724316
-
JK GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm, w/screw - #G844
JK GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm, w/screw - #G844
Old catalog #JK4344
-
S&K Gear 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm - #SK4480
S&K Gear 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,6 mm - #SK4480
-
CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#207
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA GEAR 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAHOZA
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3,5
-
REDFOX Premium long high performance guide flag, graphite, unthreaded, cut down, low profile, 1 cd. (6 pcs.) - #RFBAGPG
REDFOX Premium long high performance guide flag, graphite, unthreaded, cut down, low profile, 1 cd. (6 pcs.) - #RFBAGPG
RFBAGPG - PREMIUM HIGH PERFORMANCE LONG GUIDE FLAG GRAPHITE
-
REDFOX Premium long high performance guide flag, unthreaded, cut down, low profile, colors. - #RFBAGP
REDFOX Premium long high performance guide flag, unthreaded, cut down, low profile, colors. - #RFBAGP
RFBAGP - PREMIUM LONG GUIDE FLAG
-
REDFOX GT12 chassis kit 2022 - #RFGT12K-2022
REDFOX GT12 chassis kit 2022 - #RFGT12K-2022
-
MID AMERICA DIAMOND CUTTER FOR GROOVING COMMUTATOR W/RING
MID AMERICA DIAMOND CUTTER FOR GROOVING COMMUTATOR W/RING
SPECIAL ORDER!
-
HUDY DIAMOND TOOL for 101100 - for not caped arms - #101081
Special order!
-
KOLHOZA CUTTING TUBING STAND - KZA018
With this tubing cutting jig you can make clean cuts of your tubing and cut multiple pieces to the exact same length
Video instruction for use:
https://www.facebook.com/video.php?v=548989248562024&set=vb.100003528612947&type=2&theater
-
ZHB SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.
SET OF BRUSHES WITH THE STEEL, COPPER AND VISCOSE BRISTLE, 3 pcs.
Braid/Chassis Brush. Features super strong bristles and rugged handle - makes quick work of serious braid work or the removal of stubborn chassis crud.
Brush made of stainless steel for fluffing brushes in a guide
-
ZHB MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE
MAGNETIC TRAY FOR STORAGE SMALL PARTS ON WORKTABLE
Very need thing on your work tables! This tray can eliminate lose & drop on the floor small parts, such as screws, pinions & others.
-
INORS TAP 4/40"
TAP 4/40"
-
ZHB DIAMOND MAGNET HONE Ø12.85 mm
ZHB DIAMOND MAGNET HONE Ø12.85 mm
-
ZHB DIAMOND MAGNET HONE ANY DIA., special order
DIAMOND MAGNET HONE ANY DIA.
Special order
-
KOFORD DIAMOND WHEEL FOR MAGNETS .500"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
KOFORD DIAMOND WHEEL FOR MAGNETS .538"
ZHB DIAMOND WHEEL FOR MAGNETS Ø13.70 mm
Special order
-
Dubick Diamond brush radius tool dia. 188" (4.77 mm) - #768-188
Dubick Diamond brush radius tool dia. 188" (4.77 mm) - #768-188
-
Dubick Diamond brush radius tool dia. 193" (4.90 mm) - #768-193
Dubick Diamond brush radius tool dia. 193" (4.90 mm) - #768-193
-
Dubick Diamond brush radius tool dia. 197" (5.00 mm) - #768-197
Dubick Diamond brush radius tool dia. 197" (5.00 mm) - #768-197
-
Dubick Diamond brush radius tool dia. 202" (5.13 mm) - #768-202
Dubick Diamond brush radius tool dia. 202" (5.13 mm) - #768-202
-
Dubick Diamond brush radius tool dia. 207" (5.25 mm) - #768-207
Dubick Diamond brush radius tool dia. 207" (5.25 mm) - #768-207
-
Dubick Diamond brush radius tool dia. 211" (5.36 mm) - #768-211
Dubick Diamond brush radius tool dia. 211" (5.36 mm) - #768-211
-
VOKI Diam. tool for slot on motor back side – 3,2mm – for scale setups - #041
VOKI Diam. tool for slot on motor back side – 3,2mm – for scale setups
This tool use when you need to make a groove in the setup. Rear axle are included. First, you put the axle from the set, then fits the diamond tool and start machining setup to the required size. In this 3 steps you gained fast & convinient groove!
-
VITULA End mill bore 3/32" (2,36 mm) - #T1252
End mills are made from special high speed steel and they are sharpened of CNC grinder. End mills are mounted in duralumin grip. These tools are intended only for manual machining of soft material components, not for steel.
-
KOLHOZA TABLE DRILL - KZA019
Created for shortening allen screws for fixing rims & gears.
Also, you can cut wire dia. untill 3 mm & square tubes made from: brass, copper, aluminum, stainless steel
-
KOLHOZA MAGNETIC STATIC WHEEL BALANCER - KZA021
Magnetic Static Wheel Balancer - Includes 3/32 " & 2 mm axles and storage axis knob
-
KOLHOZA AXLE 2 mm FOR MAGNETIC STATIC WHEEL BALANCER (KZA021) - KZA0211
Reserve axle 2mm for MAGNETIC STATIC WHEEL BALANCER (KZA021). It is possible to make the length until 52 mm
-
DUBICK SET OF STEEL PROBES FOR MEASUREMENT OF CLEARANCE, 20 pcs from 0,05 to 1 mm - #DB206
Thickness in set: - 0,05 mm/ 0,1 mm/ 0,15 mm/ 0,2 mm/ 0,25 mm/ 0,3 mm/ 0,35 mm/ 0,4 mm/ 0,45 mm/ 0,5 mm/ 0,55 mm/ 0,6 mm/ 0,65 mm/ 0,7 mm/ 0,75 mm/ 0,8 mm/ 0,85 mm/ 0,9 mm/ 0,95 mm/ 1 mm, respectively
The set is more than enough for the most detailed measurement of clearance!
-
KOLHOZA AXLE 3/32" FOR MAGNETIC STATIC WHEEL BALANCER (KZA021) - KZA0212
Reserve axle 3/32" for MAGNETIC STATIC WHEEL BALANCER (KZA021). It is possible to make the length until 57 mm
-
KOFORD 3/32 AXLES Flatted Ø3/32" (2.36 mm), (length 53 mm) - #M156F
Premium 3/32 axles with precision ground gear and wheel flats, now with perfect balance with M472 Koford tires and the new Koford gears.
-
PROSLOT GOLDUST PRO BRUSHES/VERTICAL, pair- #PS-903
Goldust Pro Vertical Motor Brushes.
1 pair prepared for installation in vertical brush hoods brushes.
-
PROSLOT GOLDUST PRO BRUSHES/VERTICAL, 6 pairs- #PS-903
Goldust Pro Vertical Motor Brushes.
6 pairs prepared for installation in vertical brush hoods brushes.
-
LUCKY BOB ARM DYE-PURPLE - #1073P
ARM DYE PURPLE
-
WELLER TIP FOR SOLDERING IRON Weller, width 3 mm (only order 2-4 week)
WELLER TIP FOR SOLDERING IRON Weller, width 3 mm
Sorry, this item avialable only for backorder 2-4 week.
-
WELLER TIP FOR SOLDERING IRON Weller, width 4 mm (only order 2-4 week)
WELLER TIP FOR SOLDERING IRON Weller, width 4 mm
Sorry, this item avialable only for backorder 2-4 week.
-
WELLER TIP FOR SOLDERING IRON Weller, width 5 mm (only order 2-4 week)
WELLER TIP FOR SOLDERING IRON Weller, width 5 mm
Sorry, this item avialable only for backorder 2-4 week.
-
WELLER REPLACEMENT TIP FOR SOLDERING IRON WELLER, width 3,81 mm, w/M6 thread - #PL133 (only order 2-4 week)
UNGPL133 - Tip Style Long Taper Chisel Tip Width O/D .15 in./3.81 mm Tip Thickness/Height/ I/D .32 in./8.13 mm Reach/Length 1.06 in./26.92 mm /
Sorry, this item avialable only for backorder 2-4 week.
-
LUCKY BOB GEAR PRESS - #LKY1000
GEAR PRESS (USED TO PRESS ON 7T THRU 11T GEARS)
-
KOLHOZA ARMATURE AXLE CHECKER MACHINE - KZA022
For testing the straightness of you axles and armatures
-
JK Pinion gear puller T-Handle - #L17
JK Pinion gear puller T-Handle - #L17
Old catalog #JK8063
-
JK Heavy Duty Pinion Gear Puller - #L23
JK Heavy Duty Pinion Gear Puller - #L23
DELUXE GEAR PULLER has tighter pin and is harder than the previous version. Made from tool steel.
Old catalog #JK8062
-
KOLHOZA Tire gluing stand - KZA024
If you are dealt a glue on rims and want to dry, we can help you!
Really usefull if you pripair for race and need gluing from 1 till 11 pair of donuts on rims and save work space on your decstop. -
KOLHOZA ELECTRONIC SPRING TENSION TOOL - KZA026
ELECTRONIC SPRING TENSION TOOL - For Measuring the tension of motor springs
-
KOFORD .050" GEAR AND WHEEL ALLEN WRENCH, black, anodized - #M162
Precision gear and wheel wrench with reduced diameter for clearance with plastic gears
-
KOLHOZA WHEEL STORAGE PLASTIC BOX Ø23.5 мм (JK, Alpha), (167 х 122 х 59 mm) - KZA027
KOLHOZA WHEEL STORAGE PLASTIC BOX - Holds 15 tubes of tires.
-
KOFORD APRON - #363
Koford Engineering apron with 3 sections
-
ZHB SCISSORS MEDICAL STRAIGHT
SCISSORS MEDICAL STRAIGHT
Scissors for cutting models body and other things such as adhesive tape, lexan for strengthening, paper or cardboard. The best medical stanles steel!
-
PARMA ULTIMATE LEXAN SCISSORS - #10404
Utimate Body Scissors - Heavy duty 8" long scissors with 3.5" blades for cutting and trimming through thick RC bodies, wire, etc. No toolbox is complete without a set.
-
KOLHOZA Aluminum guide nut driver for 9 mm and 3/8" (9.5 мм) nuts in one - KZA028
Dual ended Aluminum Guide Nut Driver. Covers the 2 most popular sizes 9mm and 3/8".
-
KOLHOZA .050" tire and gear wrench with 3/8" guide nut tool - #KZA036
KOLHOZA .050" tire and gear wrench with 3/8" guide nut tool - #KZA036
-
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø4.8 mm - #039
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø4.8 mm - #039
-
GENERAL ELECTRIC POLYCARBONATE (LEXAN) SHEET, THICK. .01" (0.25 mm), DIM.: 1000 X 1200 mm, running metre
POLYCARBONATE (LEXAN) SHEET
It is possible to cut the lexan into the dimensions you need
Parameters:
- Thick.: .01" (0.25 mm)
- Dimension: 1000 x 1200 mm
- running metre
-
KOFORD T-SHIRT, SIZE- S - #204-S
KOFORD T-SHIRT, SIZE- S
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- M - #204-M
KOFORD T-SHIRT, SIZE- M
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- L - #204-L
KOFORD T-SHIRT, SIZE- L
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
KOFORD T-SHIRT, SIZE- XL - #204-XL
KOFORD T-SHIRT, SIZE- XL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
WRIGHT WAY Flip top motor box, 1 cd. (4 pcs.) - #WWFTMB
WRIGHT WAY Flip top motor box, 1 cd. (4 pcs.) - #WWFTMB
flip top motor storage box - 4 interlocking cases
-
KOFORD T-SHIRT, SIZE- XXL - #M204-XXL
KOFORD T-SHIRT, SIZE- XXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
PROSLOT Agent 86 Bushing Oil - #PS601
Bushing Oil (Fluorescent Pink)
-
PROSLOT Agent 99 Bearing Oil - #PS602
Ball Bearing Oil (Hulk Green)
-
LUCKY BOB ARM DYE-RED - #1074R
ARM DYE-RED
-
LUCKY BOB ARM DYE-YELLOW - #1075Y
ARM DYE-YELLOW
-
UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener
Quick Overview
- solvent free two-part epoxy resin adhesive for heavy-duty requirements (300kg/cm2)
- mix proportion: 1 part binder to 1 part hardener (by volume).
- working time (open time) approx. 90 minutes
- setting time and final strength depend on temperature.
- final strength up to 30N/mm2
- time resistant, impact resistant and water resistant
Excellent epoxy for fixing magnets! -
SKINNER EPOXY HIGH-TEMPERATURE RESIN, one-component - SKEPOXY
Skinner Epoxy
super strength high temp epoxy
Epoxy Instructions
#1 Clean surfaces to be bonded ( lightly sand back of magnets with 400 paper or wire brush with dremel.) Remove any loose magnet dust with magnet putty then wash off with MEK or Acetone solvent. Clean inside of can then cross hatch with exacto blade and wash with MEK or Acetone.
#2 Apply a thin coating to both the magnets and can surfaces to be bonded. Allow 25 minutes for parts to air dry
#3 Place magnets in can, position with v blocks or a slug then place in pre heated oven @ 180 F for 15 minutes. Remove from oven then let cool. Make final magnet adjustments if necessary.
#4 Pre-heat oven to 350 f place setup in oven for 25 minutes
remove, cool and hone to desired gap. -
LUCKY BOB ARM DYE-BLACK - #10746BK
ARM DYE-BLACK
-
KOFORD THREAD RETAINING COMPOUND, tube -M300
Thread retaining compound used to keep can screws from vibrating loose on aluminum endbells. Prevents endbell damage by allowing can screws to be tightened until only snug
-
KOFORD CONTROLLER SPRINGS - #M371
Controller springs for all Koford controllers
-
CAHOZA 3 COIL SPRINGS STAINLESS STEEL, pair - #254
3 COIL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15 motors, made from stainless steel, resists up to 800F, these springs have got the same tension as Red Champion, but the quality and workout is far more professiona -
KOFORD Ultrastrong radial C-Can drag magnets- #M592
KOFORD Ultrastrong radial C-Can drag magnets
Ultrastrong radial drag magnets, when used with M593 treated can produces 4% more flux then competitors wide can and .170 thick quad magnets without the problems of nonstandard size cans. .165 thick x .520 long
-
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
PROSLOT Purple dot MegaMaster 6-mag magnets - #PS-909S
Magnets only!
-
B52 C-Can Combo magnets 0.167" thick, 0.458" long, type 1 (one side is flat one side is bevelled), pair
B52 C-Can magnets, type 1, pair
-
B52 C-Can Flat magnets 0.167" thick, 0.458" long, type 2 (both side is flat), pair
B52 C-Can magnets, type 2, pair
-
CAHOZA Single endbell for C-Cans (G-12) - #126
CAHOZA Single endbell for C-Cans (G-12)
Aluminium hard anodised single endbell for G12 Cahoza C-cans, lightened, pattern hole drilled for hardware #170 and #171
-
CAHOZA Assembled endbell for G12 C-Cans - #146
CAHOZA Assembled endbell for G12 C-Cans
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171), 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
CAHOZA Assembled endbell for G12 C-Cans +4° rotation - #146-H4
CAHOZA Assembled endbell for G12 C-Cans +4° rotation
New aluminium hard anodised assembled endbell for all Cahoza C-cans (G12), gold plated horizontal hardware (#171) turned to +4°, 3coil aluminium spring posts, includes stainless steel ball bearing, diameter for cans is 21,25mm (.837"), this endbell is made from very hard aluminium, perfectly dissipates heat away from brushes
-
PROSLOT Magnet Clips for C-cans,1 pc. - #PS640
PROSLOT Magnet Clips for C-cans, 1 pc.
This is the clips for all 12-group (C-cans) motors.
-
PROSLOT HARDWARE FOR PROSLOT MOTORS X-12 GROUP, W/SPRING CUPS & SCREWS- #PS642
Hardware set complete -includes hardware, oilite, spring cups and screws
-
PROSLOT BRUSH HOOD/ HEAT SINK SET FOR PROSLOT MOTOR (X-12 GROUP), W/OUT SPRING CUPS & SCREWS- #PS641
Brush Hood & Heat Sink set
-
PROSLOT Velociraptor VR 12 “NEO” motor - #PS-4019
PROSLOT Velociraptor VR 12 “NEO” motor
This motor uses the new PS-4017 “Neo” Euro MK1 setup with a specially made .500 diameter VR12 machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the new wave of “NEO” F/C racing. Our testing using an 85 gram hardbody test car netted .720 ET’s @ 70+ MPH. Recommended starting gear ratio 14/52.
-
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
CAHOZA Tapping screw for Allen head wrench, 1 pc. - #272
-
CHAMPION Super wasp motor - #CHA509HTX
CHAMPION Super wasp motor - #CHA509HTX
SUPER WASP Motor (Champion) - Balanced/High Timed 42 Degrees - .350" Stack / 60T / 30 Gauge Wire
-
PROSLOT SpeedFX 16D/S16D SETUP - #PS 2004
FX 16D/S16D Motor Setup
-
PROSLOT 16D/S16D MOTOR CAN - #PS2005
Proslot can for 16D motors, w/out magnets
-
PROSLOT SPEED FX S16D BLUEPRINT SETUP, W/MATCHED MAGNETS - #PS 2100
SpeedFX 16D/S16D Blueprinted Setup with Matched Magnets. The setup includes straightened can, soldered oilite, aligned and honed brush hoods and matched magnets.
-
PROSLOT Velociraptor VR eXtreme “NEO motor - #PS-4021
PROSLOT Velociraptor VR eXtreme “NEO motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter VR eXtreme machine wound armature on our race proven Intruder blank and includes G7 brushes. This motor was built for the “Ultimate” bracket racer and “Outlaw NEO” class racer. Our testing using an 85 gram hardbody test car netted .590 ET’s @ 90+ MPH. This motor has no equal in performance for the money. Recommended starting gear ratio 14/54
-
PROSLOT Velociraptor VR Open “NEO” motor - #PS-4025
PROSLOT Velociraptor VR Open “NEO” motor
This motor uses the new PS-4017 “NEO” Euro MK1 setup with a specially made .500 diameter custom hand wound all-out Topgun style armature featuring our EDM commutator, wound on our race proven Intruder blank and our copper hardware on the endbell. Standard wind 18/24.5 and double ball bearings. Also available in 25/25, 15/24, 14/24
-
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
JK Set-up For JK#M3 HAWK w/Ceramic Magnets - #M3S
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30301
-
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
JK REPLACEMENT ENDBELL FOR HAWK #M3 (#M6), ALUMINIUM - #M3EA (#M6EA)
New improved - Upgraded Aluminum endbell for JK Hawk #M3 motors
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
Old catalog #JK30303AL
-
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
JK NEODYMIUM MAGNETS FOR HAWK MOTOR - #M3M (#M6M)
NEODYMIUM REPLACEMENT MAGNETS FOR HAWK 3030 MOTOR (more powerful than stock)
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
JK Stainless steel motor screw, Hawk, allen head, 1.5mm, 1 pc. - #M55
JK Stainless steel motor screw, Hawk, allen head, 1.5mm, 1 pc. - #M55
Old catalog #JK3019
-
JK Motor Screw 6mm 0.050" Allan Head Black, 1 pc. - #M52
JK Motor Screw 6mm 0.050" Allan Head Black, 1 pc. - #M52
Old catalog #JKS03
-
JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52
JK Motor Screw 6mm 0.050" Allan Head Black, 6 pcs. - #M52
Old catalog #JKS03
-
KOFORD ARMATURE M199SAW CUSTOM EURO ARMS, - M199SAW Custom Euro arms
All PARAMETERS (from...to) under special order
(Write to us to choose what you need)
- Wingings: various
- Dia.: 0.459"...0.490"
- Stack: 0.235"...0.300"
- Long (by ballbearings): 0.634"...0.800"
- Advance angle: 15...28
- Arm.shaft: 1,5mm...2mm
(you can fill this form for made special order)Armatures comes after rebalancing (cost 3$).
-
CAHOZA 12 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA 16 magnets FORMEL 32 SET UP .376T x .256L - can ID .570 - #100-A
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .580" (14,75 mm)
- Magnets height: .376" (9,6 mm)
- Magnets length: .255" (6,5 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .567" (14.4 mm)
- For armatures dia.: .472" armatures, especially altered horizontal hardware, 3 coil anodised spring posts, endbell is milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 16 SEGMENT, 450T x .300L - can ID .577 - #101-A
PARAMETERS
- 16 segment magnets – bevelled 7°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
CAHOZA SPORT 32 SETUP V 24 SEGMENT, 450T x .300L - can ID .577 - #101-B
PARAMETERS
- 16 segment magnets – bevelled 15°
- Outside dia.: .577" (14,60 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, especially altered vertical hardware, 5 coil anodised spring posts, long tower for PK arms (with commudator cap), endbell is partially milled on the bottom side so that this setup fits into all chassis, fits into Horky-Recek chassis
-
ZHB F1 TOOL SETUP, .256 long - .376 tall - can ID .570
F1/32 SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Dia. for gluing magnets: 14.7 mm
- Outside dia.: .570"
- Magnets height: .376"
- Magnets length: .256"
- For armature: KOFORD ULTRA SHORT (M255EH)
- Ballbearings: GRW (1,5 mm width)
-
ZHB F1 10M SETUP, .256 long - .376 tall - can ID .570
SPECIAL ORDER!
F1/32 SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Dia. for gluing magnets: 14.7 mm
- Outside dia.: .570"
- Magnets height: .376"
- Magnets length: .256"
- For armature: KOFORD ULTRA SHORT (M255EH)
- Ballbearings: GRW (1,5 mm width)
This is no actual photo! Actual photos will be added later!
-
ZHB F1 12M SETUP, .256 long - .376 tall - can ID .570
SPECIAL ORDER!
F1/32 SETUP 12 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Dia. for gluing magnets: 14.7 mm
- Outside dia.: .570"
- Magnets height: .376"
- Magnets length: .256"
- For armature: KOFORD ULTRA SHORT (M255EH)
- Ballbearings: GRW (1,5 mm width)
This is no actual photo! Actual photos will be added later!
-
ZHB ES32 TOOL SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 10M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 12M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 12 MAGNETS
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 14M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 14 MAGNETS
PARAMETERS
- Magnets quantity: 14
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 16M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 16 MAGNETS
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 18M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 18 MAGNETS
PARAMETERS
- Magnets quantity: 18
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 20M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 20 MAGNETS
PARAMETERS
- Magnets quantity: 20
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES32 22M SETUP, .300 long - .450 tall - can ID .577
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-32 SETUP 20 MAGNETS
PARAMETERS
- Magnets quantity: 20
- Outside dia.: .577"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 TOOL SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 10M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 12M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 12 MAGNETS
PARAMETERS
- Magnets quantity: 12
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 14M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 14 MAGNETS
PARAMETERS
- Magnets quantity: 14
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (1,5 mm width)
-
ZHB ES24 16M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 16 MAGNETS
PARAMETERS
- Magnets quantity: 16
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 18M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 18 MAGNETS
PARAMETERS
- Magnets quantity: 18
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 22M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 24 MAGNETS
PARAMETERS
- Magnets quantity: 24
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 24M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 24 MAGNETS
PARAMETERS
- Magnets quantity: 24
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 32M SETUP, .300 long - .450 tall - can ID .590
SPECIAL ORDER! WRITE TO US TO CHOOSE INSIDE DIAMETER OF MAGNETS
ES-24 SETUP 32 MAGNETS
PARAMETERS
- Magnets quantity: 32
- Outside dia.: .590"
- Magnets height: .450"
- Magnets length: .300"
- Ballbearings: GRW (2 х 5 х 2,3 mm)
-
ZHB ES24 TOOL MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 10M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 TOOL MOTOR
Magnet height 9,6mm (.376"), length 6.5 мм (.255"), outside diameter of magnets 14,75 mm (.580"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, BigFoot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation , Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 12M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 14M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 10M MOTOR
Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 16M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 18M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 CAHOZA 20М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 22M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 24M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB F 1/32 CAHOZA 10M MOTOR
Magnet height 9,6mm (.376"), length 6.5 mm (.255"), outside diameter of magnets 14,47 mm (.570"), armature Koford (or VALIKO ceramic, blue) 45/29 ultra short Ø.465" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, Proslot brushes, Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES24 CAHOZA 24М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,98 mm (.590"), armature Koford (or VALIKO ceramic, blue) 19/24-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 TOOL MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 10M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 12M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 14M MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 16М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB CAHOZA ES32 16М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 18М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
ZHB ES32 22М MOTOR
Magnet height 11,43 mm (.450"), length 7,62 mm (.300"), outside diameter of magnets 14,65 mm (.577"), armature Koford (or VALIKO ceramic, blue) 25/25-, Ø.485" 25°, rebalanced, shaft 1.5 mm, GRW ballbearings, brush Big Foot for "+", brush Proslot for "-", Cahoza 3 coil springs, TQ silver shunt wire, Alpha teflon spring insulation, Koford spacers.
Any order of motors discusses individual. Possibility to build motors of individual configurations under order (wire, number of turns, advance angle)
-
RALPH THORNE Clear Body 1/24 4.5" Truck, Lexan .007" (0.175 mm), with paint mask - #TRUCK007
RALPH THORNE Clear Body 1/24 4.5" Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
-
NeAn INTERIOR FOR PRODUCTION 1/32 BODIES, Lexan, thickness 0.125 mm - #105-L
INTERIOR FOR PRODUCTION 1/32 BODIES
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness, mm: 0,125
-
NeAn INTERIOR FOR PRODUCTION 1/32 BODIES, PVC, thickness 0.2 mm - #105-P
INTERIOR FOR PRODUCTION 1/32 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness, mm: 0,2
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT, Lexan, thickness 0.125 mm - #106-L
INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness, mm: 0,125
- w/rear seat
-
NeAn INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT, PVC, thickness 0.2 mm - #106-P
INTERIOR FOR PRODUCTION 1/24 BODIES, W/REAR SEAT
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/24
- Thickness, mm: 0,2
- w/rear seat
-
NeAn INTERIOR FOR PRODUCTION 1/32 BODIES, PVC, thickness 0.2 mm - #107-P
INTERIOR FOR PRODUCTION 1/32 BODIES
- Made from: Polyvinyl chloride (PVC)
- For: Production 1/32
- Thickness, mm: 0,2
-
KOLHOZA 1/24 Car interrior clear, thickness .005" (0.125 mm) - #0121
KOLHOZA 1/24 Car interrior
- clear,
- thickness .005" (0.125 mm).
-
NeAn Clear body Retro 1/24 McLaren M1B 1967, Lexan .010" (0.254 mm) - #112-L
Clear body Retro 1/24 McLaren M1B 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Lola T70 MK II Spyder 1966, Lexan .010" (0.254 mm) - #113-L
Clear body Retro 1/24 Lola T70 MK II Spyder 1966
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Lola T70 MK III B GT 1969, Lexan .010" (0.254 mm) - #114-L
Clear body Retro 1/24 Lola T70 MK III B GT 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ferrari 350 Canam 1967, Lexan .010" (0.254 mm) - #115-L
Clear body Retro 1/24 Ferrari 350 Canam 1967
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro Formula 1/24 McLaren M9A 1969, Lexan .010" (0.254 mm) - #116-L
Clear body Retro Formula 1/24 McLaren M9A 1969
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Jaguar Mark II 1959, Lexan .015" (0.38 mm) - #117-L
Clear body Retro 1/24 Jaguar Mark II 1959
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Buick Special Riviera Coupe 1955, Lexan .025" (0.635 mm) - #118-L
Clear body Retro 1/24 Buick Special Riviera Coupe 1955
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .025" (0.635 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Honda RA-302 1968, Lexan .010" (0.254 mm) - #119-L
Clear body Retro 1/24 Honda RA-302 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Alfa Romeo 33/2 Tipo Daytona 1968, Lexan .010" (0.254 mm) - #120-L
Clear body Retro 1/24 Alfa Romeo 33/2 Tipo Daytona 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Chrysler 300-B 1955, Lexan .015" (0.38 mm) - #121-L
Clear body Retro 1/24 Chrysler 300-B 1955
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Cadillac Series 61 Race Car 1950, Lexan .015" (0.38 mm) - #122-L
Clear body Retro 1/24 Cadillac Series 61 Race Car 1950
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ford P68 (F 3L) 1968, Lexan .010" (0.254 mm) - #123-L
Clear body Retro 1/24 Ford P68 (F 3L) 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ford GT MK IV 1968, Lexan .010" (0.254 mm) - #124-L
Clear body Retro 1/24 Ford GT MK IV 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Chaparral 2D "Sebring" Coupe 1966, Lexan .010" (0.254 mm) - #125-L
Clear body Retro 1/24 Chaparral 2D "Sebring" Coupe 1966
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Chaparral 2С 1965, Lexan .010" (0.254 mm) - #126-L
Clear body Retro 1/24 Chaparral 2С 1965
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 McLaren M6 1968, Lexan .010" (0.254 mm) - #127-L
NeAn Clear body Retro 1/24 McLaren M6 1968
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Matra MS 670 1972, Lexan .010" (0.254 mm) - #141-L
Clear body Retro 1/24 Matra MS 670 1972
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ferrari 312 PB 1972, Lexan .010" (0.254 mm) - #142-L
Clear body Retro 1/24 Ferrari 312 PB 1972
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Mirage M6 1974, Lexan .010" (0.254 mm) - #143-L
Clear body Retro 1/24 Mirage M6 1974
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Ford C100 1981, Lexan .010" (0.254 mm) - #144-L
Clear body Retro 1/24 Ford C100 1981
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Porsche 962 1985, Lexan .010" (0.254 mm) - #145-L
Clear body Retro 1/24 Porsche 962 1985
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Porsche 936/935 Kremer CK 5 1983, Lexan .010" (0.254 mm) - #146-L
Clear body Retro 1/24 Porsche 936/935 Kremer CK 5 1983
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 TOJ TG 390 1981, Lexan .010" (0.254 mm) - #147-L
Clear body Retro 1/24 TOJ TG 390 1981
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Jaguar XGR 14 1991, Lexan .010" (0.254 mm) - #148-L
Clear body Retro 1/24 Jaguar XGR 14 1991
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
KOLHOZA EUROSPORT 1/24 AUDI BODY, LEXAN, thickness .005" (0.125 mm) - #654-LT
EUROSPORT 1/24 Audi Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Special order!
-
KOLHOZA EUROSPORT 1/24 AUDI BODY, LEXAN, thickness .007" (0.175 mm) - #654-L
EUROSPORT 1/24 Audi Body
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Special order!
-
NeAn Clear body Eurosport 1/32 Cadillac, Lexan .005" (0.125 mm) - #155-LT
Clear body Eurosport 1/32 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Cadillac, Lexan .007" (0.175 mm) - #155-L
Clear body Eurosport 1/32 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Zitec 04 S, Lexan .005" (0.125 mm) - #157-LT
Clear body Eurosport 1/32 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Cadillac, Lexan .005" (0.125 mm) - #154-LT
Clear body Eurosport 1/24 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body, w/paint masks
-
NeAn Clear body Retro 1/24 Peugeot 905 1991, Lexan .010" (0.254 mm) - #149-L
Clear body Retro 1/24 Peugeot 905 1991
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
NeAn Clear body Retro 1/24 Interpid RM1 1993, Lexan .010" (0.254 mm) - #150-L
Clear body Retro 1/24 Interpid RM1 1993
- Made from: Polycarbonate (Lexan)
- For: Retro 1/24
- Thickness: .010" (0.254 mm)
- Clear body
-
PARMA PRO SCALE INTREPID .007" CLEAR BODY - #842A
PRODUCTION 1/32 INTERPID BODY
.007 Clear body with window paint masks for International 32 chassis.
- Made from: Polycarbonate (Lexan)
- For: Production 1/32
- Thickness, inches: .007
-
NeAn Clear body Eurosport 1/24 Cadillac, Lexan .007" (0.175 mm) - #154-L
Clear body Eurosport 1/24 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Zitec 04 S, Lexan .007" (0.175 mm) - #157-L
Clear body Eurosport 1/32 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32U Audi R8, Lexan .005" (0.125 mm) - #160-L-5
NeAn Clear body Eurosport 1/32U Audi R8
This body is made according to ES-32 rules for chassis Production 1/32
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32U
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32U Audi R8, Lexan .007" (0.175 mm) - #160-L-7
NeAn Clear body Eurosport 1/32U Audi R8
This body is made according to ES-32 rules for chassis Production 1/32
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32U
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32U Audi R8, PVC .008" (0.2 mm) - #160-P
NeAn Clear body Eurosport 1/32U Audi R8
This body is made according to ES-32 rules for chassis Production 1/32
- Made from: Polyvinyl chloride (PVC)
- For: Eurosport 1/32U
- Thickness: .008" (0.2 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car, Lexan .005" (0.125 mm) - #162-L-5
Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car, Lexan .007" (0.175 mm) - #162-L-7
Clear body Eurosport 1/32 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Cadillac, Lexan .01" (0.254 mm) - #154-LD
Clear body Eurosport 1/24 Cadillac
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .01" (0.254 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Zitec 04 S, Lexan .005" (0.125 mm) - #156-LT
Clear body Eurosport 1/24 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
CAMEN Air control kit .005" skirtless - #5910.055
CAMEN Air control kit .004" skirtless - #5910.045
Air Control Kit including .014" Diaplane, .005" Non Skirted Side Dams and .005" Rear Spoiler
-
NeAn Clear body Eurosport 1/24 Zitec 04 S, Lexan .007" (0.175 mm) - #156-L
Clear body Eurosport 1/24 Zitec 04 S
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear body Eurosport 1/32 Porsche 917, Lexan .005" (0.125 mm) - #K 022-005
Clear body Eurosport 1/32 Porsche 917
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .005" (0.125 mm)
- Clear body
-
JK Front wheels for F1/32, 0.750"D 0.530"H 0.225"W 3/32"Axle (Ø18,8 mm, rimSz 13,46 mm, width 5,7 mm, axle 2,36 mm), pair - #T110F
JK Front wheels for F1/32, pair - #T110F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.225" (5,7 mm)
- Dia.: 0.750" (18,8 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8746PF
-
BSV Plastic rims for 3/32" axle, width 20 mm, Ø11 mm - #BSV2011
BSV Plastic rims
- For 3/32" axle;
- Width 20 mm;
- Dia. 11 mm.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 16 mm, Ø10.5 mm,w/offset of the hub for ES 1/32 & Production 1/32, ultra light(1,64 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 16
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,64
- with offset of hub for ES 1/32 & Production 1/32
-
S&K PLASTIC RIMS FOR 3/32" axle, width 20 mm, Ø11 mm, ultra light (1,82 gr/pair) - #SK1120
S&K PLASTIC RIMS, ultra light (1,82 gr/pair) - #SK1120
PARAMETERS
- axle, mm.: 2,36
- width, mm: 20
- dia.,mm: 11
- weight per pair, gr/pair: 1,82
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø11 mm - #BSV1611
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 11 mm.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø11 mm, w/offset of the hub - #BSV1611of
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 11 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
S&K PLASTIC RIMS FOR 2 mm axle, width 20,2 mm, Ø10.5 mm, ultra light (1,72 gr/pair)
PARAMETERS
- axle, mm: 2
- width, mm: 20,2
- dia.,mm: 10,5
- weight per pair, gr/pair: 1,72
-
BSV Duraluminium rims for 3/32" axle, width 16 mm, Ø11 mm, w/offset of the hub - #BSVd1611of
BSV Duraluminium rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 11 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
BSV Pinion gear 48 pitch, 10T, 0° angle, 2 mm bore, STEEL - #BSV4810
BSV Pinion gear 48 pitch, 10T, 0° angle, 2 mm bore, STEEL - #BSV4810
-
S&K GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm - #SK3864
S&K GEAR 64 PITCH, 38T, 0° angle, 3/32" axle, Ø15.65 mm - #SK3864
-
CAHOZA Gear 64 pitch, 38T, 0° angle, 3/32" axle, Ø15.80 mm - #6
CAHOZA Gear 64 pitch, 38T, 0° angle, 3/32" axle, Ø15.80 mm - #6
Polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
PROSLOT GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.06 mm, w/screw- #680-39
38t Polymer Gears 64 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 35T - Pink, 36T-yellow, 37T-silver, 38T-blue, 39T-violet, 40T-green
-
BSV Gear 64 pitch, 39T, 0° angle, 3/32" axle - #BSV6439
BSV Gear 64 pitch, 39T, 0° angle, 3/32" axle - #BSV6439
-
S&K GEAR 64 PITCH, 37T, 16° angle, 3/32" axle, Ø15.47 mm - #SK3764A
S&K GEAR 64 PITCH, 37T, 16° angle, 3/32" axle, Ø15.47 mm - #SK3764A
-
CAHOZA POLYMER GEAR 64 PITCH, 37T, 16° ANGLE, 3/32" AXLE, Ø15,42 mm, 12 pc - #11 (CAH6437a)
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
CAHOZA POLYMER GEAR 64 PITCH, 37T, 16° ANGLE, 3/32" AXLE, Ø15,42 mm - #11 (CAH6437a)
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
ARP PINION GEAR 64 PITCH, 11T, 0° ANGLE, 2 mm bore - #ARP6411
64 pitch stainless steel 10 tooth pinion gears heat treated to 36-38 hardness
-
ARP PINION GEAR 64PITCH, 9T, 5° ANGLE, 2 mm bore - #ARP6409A
64 pitch stainless steel 9 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP PINION GEAR 64 PITCH, 10T, 0° ANGLE, 2 mm bore - #ARP6410
64 pitch stainless steel 10 tooth pinion gears heat treated to 36-38 hardness
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, 1 pc. - #P610N
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow, 1 pc. - #P610N
This is press-on style pinion gear
Old catalog #JK440010S
-
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow (6 ea) - #P610N-6
JK Pinion 64 pitch, 10T, 0° angle, Press-on long lasting stainless steel pinion gear narrow (6 ea) - #P610N-6
This is press-on style pinion gear
Old catalog #JK440010S
-
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610
This is press-on style pinion gear
Old catalog #JK440010
-
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P610-6
JK Pinion 64 pitch, 10T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P610-6
This is press-on style pinion gear
Old catalog #JK440010
-
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610S
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P610S
Old catalog #JK450010
-
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P610S-6
JK Pinion 64 pitch, 10T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P610S-6
Old catalog #JK450010
-
ARP EDM Pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #ARP7207EDM
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, 3/32" AXLE, Ø15,7 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D
JK GEAR 72 PITCH 43T, 15° angle, 3/32" axle, w/screw - #G743D
Old catalog #JK724315
-
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm - #4-B
CAHOZA POLYMER GEAR 72 PITCH, 43T, 16° ANGLE, HIGH DURABLE,3/32" AXLE, Ø15,72 mm
new highly durable polymer gears 72 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant.
-
ARP Plastic spur gear 72 pitch, 43T, 15° angle, 3/32" axle - #arp7243bp
ARP Plastic spur gear 72 pitch, 43T, 15° angle, 3/32" axle - #arp7243bp
-
ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP
ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle - #ARP7243SP
Actual photo will be added soon :)
-
ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle, 1 cd. (6 pcs.) - #ARP7243SP
ARP Plastic spur Gear 72 pitch, 43T, 2° angle, 3/32" axle, 1 cd. (6 pcs.) - #ARP7243SP
Actual photo will be added soon :)
-
S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272
S&K GEAR 72 PITCH, 42T, 0° angle, 3/32" axle, Ø15.46 mm - #SK4272
-
S&K Gear 72 pitch 42 teeth, 0° angle, 3/32" axle, Ø15.46 mm glyed on Proslor axle - #225
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
CAHOZA POLYMER GEAR 80 PITCH, 44T, 0° angle, 3/32" axle, Ø14,56 mm - #1
POLYMER GEARS 80 PITCH ELITE
polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
S&K 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.3 mm glued on 3/32" axle ProSlot - ZHB#210
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
CAHOZA GEAR CAHOZA 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.56 mm glued on 2 mm axle - CAH#
The hub is cut to a width 3.8 mm & machined to a diameter 3.5 mm
CAHOZA gluing gears for Vladimir Horky. They're very strongly glued, therefore it's more reliable
You can order gluing any gear on any axle. Price for gluing & machining - $3.5 (ZHB#109)
-
VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB#211
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
VITULA 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.45 mm glued on 3/32" axle ProSlot - ZHB_#211
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
JK 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.28 mm glued on 3/32" axle ProSlot - ZHB#212
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109
-
HORKY BIG HUB 80 PITCH 43T, 0° angle, 3/32" axle, Ø14.35 mm glued on 3/32" axle ProSlot - ZHB#213
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K Gear 80 PITCH, 45T, 0° angle, 2 mm axle, Ø14,9 mm - #SK45802
S&K Gear 80 PITCH, 45T, 0° angle, 2 mm axle, Ø14,9 mm - #SK45802
-
MASHKOZA GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #45-2.36mm
MASHKOZA GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #45-2.36mm
-
BSV CROWN GEAR 72 pitch, 32 teeth, 3/32" axle, black - #BSVF7232
BSV CROWN GEAR 72 pitch, 32 teeth, 3/32" axle, black - #BSVF7232
-
BSV CROWN GEAR 72 pitch, 32 teeth, 2 mm axle, black - #BSVF72322
BSV CROWN GEAR 72 pitch, 32 teeth, 2 mm axle, black - #BSVF72322
-
BSV CROWN GEAR 72 pitch, 33 teeth, 2 mm axle, black - #BSVF72332
BSV CROWN GEAR 72 pitch, 33 teeth, 2 mm axle, black - #BSVF72332
-
S&K Crown gear 72 pitch 33 teeth, offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - #SK3372
S&K Crown gear 72 pitch 33 teeth, offset 0.5 mm, 2 mm axle, Ø13.2 mm, green - #SK3372R
This gear used in Formula 1/32
-
SCB Braids STANDARD (sizes: 4,2 x 0,35 mm х 26 mm), tin plated, 5 pairs - # STSN01110
SCB Braids STANDARD, tin plated, 5 pairs - # STSN01110
sizes: 4,2 x 0,35 mm х 26 mm (.165" x .014" x 1.024")
Good braids for all classes. Made in Germany
-
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A-1
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A
anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in red color
-
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 10 pc. - #31-A
CAHOZA Red anodized aluminium guide nut, 9 mm socket, 1 pc. - #31-A
anodised aluminium guide nuts, made on a CNC machine, including the hexagon shape, size is 9mm (.354"), available in red color
-
KOFORD BRASS GUIDE NUT 9.5 MM SOCKET - #M615
Brass guide nut. Adds one gram nose weight
-
JK Brass machined guide nuts 9,5 mm socket - #U7
JK Brass machined guide nuts 9,5 mm socket
Old catalog #JK35151
-
JK Duralumin guide nut 9,5 mm socket - #U5
Duralumin Guide Nuts – Lightweight custom machined 9,5 mm socket
Old catalog #JK3515
-
KOFORD DRILLED ALUM ANODIZED GUIDE NUT, 9,5 MM SOCKET - #M302
Lightweight drilled, anodized aluminum guide nut.
-
JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53
JK Self tapping motor screw 5/64"/ 2 mm long, allen head, black, 1 pc. - #M53
Old catalog #JKS2016B
-
JK Self-tapping end bell screw, phillips head, 1 pc. - #M51
JK Self-tapping end bell screw, phillips head, 1 pc. - #M51
Old catalog #JKS02
-
CAHOZA TAPPING SCREWS, for T5 driver, 1 pc. - #273-1
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA TAPPING SCREWS, for T5 driver, 24 pc. - #273
Cahoza profi tapping screws, thread diameter is 1,52mm (.0598"), length thread is 4 mm (.157"), bolt head high is 1,2mm (.047"), for T5 driver or imbus Tip .051", screws are black coated,
-
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
CAHOZA Motor screw 0/80" stainless steel, 1 pc. - #325-1
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver
-
ZHB ASSEMBLY MODEL TO RACE (w/out price of parts & price of assembly of the motor ) - #102
The price of assembling the model includes the installation of the motor, together with the soldering of the pinion and the setting of the pinion-gear position, the installation of a guide, lead wires, ballbearings or oilities and tubes for pins, if necessary.
Any configuration is possible!!!!!
-
SLICK7 3/32" (2.36 MM), .016" (0.4 MM) THICK, ALUMINIUM AXLE SPACERS, 10 pcs. - #SL7-38
3/32" (2.36 MM), .016" (0.4 MM) THICK, ALUMINIUM AXLE SPACERS, 10 pcs. - #SL7-38
-
JK 3/32" (2.36 mm), .022" (0.56 mm) THICK, STEEL AXLE SPACERS, 10 pcs. - #U54-10
JK 3/32" (2.36 mm), .022" (0.56 mm) THICK, STEEL AXLE SPACERS, 10 pcs. - #U54-10
Old catalog #JK178
-
KOFORD 3/32" (2.36 MM) .024" (0.61 MM) THICK STEEL AXLE SPACER, 12 psc. - #M624
.024" X 3/32" stainless axle spacers. 12 per bag.
-
REDFOX GT12 2022 chassis assembled w/out ballbearings - #RFGT12A-2022
REDFOX GT12 2022 chassis assembled w/out ballbearings - #RFGT12A-2022
-
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
PROSLOT Lead wire 18Ga (0,82 mm²) with soldered copper clip on both ends, pink - #PS-619
9 Lead Wire with Clips 18 AWG w/441 Ultra fine strands
-
PRO SLOT LEAD WIRE 18Ga (0,82 mm²) with soldered copper clip on both ends, pink, 40 cm - #PSL620
DRAGSTER LEAD WIRE WITH CLIPS - 40 cm long with nickel plated guide clips
-
RED FOX Floating pin mounts for JK chassis, 4 pcs. - #RFFLOATP
RED FOX Floating pin mounts for JK chassis, 4 pcs.
Body mounting to enable maximum movement between body and chassis. Used on any pressed steel or brass chassis. Precision machined aluminum and plated.
-
ARP Aluminum body pin mounts (4 pcs.) - #ARPBPM
Body pin mounts, Precision machined aluminum and plated to allow for soldering. Ultra lightweight. 4 pieces per bag
-
JK 1/32 Direct Drive Chassis Kit - #C10
JK 1/32 Direct Drive Chassis Kit - #C10
Old catalog #JK32DD
-
MID AMERICA 1/24 Gemini flexy chassis stainless steel - #MID216
MID AMERICA 1/24 Gemini flexy chassis stainless steel - #MID216
-
MID AMERICA 1/24 Gemini flexy chassis stainless steel nickel plated - #MID216N
MID AMERICA 1/24 Gemini flexy chassis stainless steel nickel plated - #MID216N
-
JK 4" Cheetah F1/Indy chassis kit, narrow - #C30
JK 4" Cheetah F1/Indy chassis kit, narrow - #C30
Old catalog #JK251171
-
JK 4" Cheetah F1/Indy chassis kit, wide - #C35
JK 4" Cheetah F1/Indy chassis kit, wide
Old catalog #JK251172
-
KOFORD Ø3/32" (2.36 mm) PREMIUM HOLLOW AXLE, length 53 mm - #KOF339
Premium Qualifying 3/32 .066 hole hollow axle made from tubing. For those who wish to grind their own flats.
-
RED FOX F1/JRL chassis kit w/out ballbearings - #GRF2K20K
RED FOX F1/JRL chassis kit w/out ballbearings - #GRF2K20K
-
PROSLOT Ø3/32" (2.36 mm) DRILL BLANK AXLE, (length 58 mm) - #PS-607
3/32" (2.36 MM) DRILL BLANK AXLE. Axle length is 58 mm
-
JK Ø3/32" (2.36 mm) rear axle, length 2.580" (65 mm) - #A2
JK Ø3/32" (2.36 mm) rear axle, length 2.580" (65 mm) - #A2
Solid 3/32" axle, highly durable 60HRc, axle is very fine grinded and polished, the 3/32" diameter is very accurate with maximum deflection of 0,001 mm (.00004"), great straightness along the entire length, it is crooked to max. 0,005 mm (.0002") throughout the entire length, ends are also grinded, exact diameter of this axle is 2,371 mm (.093346"), the best axle ever available for profi racing
Old catalog #JK5502
-
JK Ø3/32" (2.36 mm) rear axle, length 2.950" (75 mm), Precision Ground True Drill Blank Axle, High Hardness - #A3
JK Ø3/32" (2.36 mm) rear axle, length 2.950" (75 mm), Precision Ground True Drill Blank Axle, High Hardness - #A3
Old catalog #JK5507DB
-
RED FOX F1/JRL assembled chassis w/out ballbearings - #GRF2K20B
RED FOX F1/JRL assembled chassis w/out ballbearings - #GRF2K20B
-
KELLY Ø3/32" (2.36 mm) rear axle - #KE998
KELLY Ø3/32" (2.36 mm) rear axle - #KE998
Guaranteed Straight Small diameter Drill Blank 3/32 axles
-
JK Lead wire 18Ga (section 0,82 mm²), transparent, 1 m (3 ft) - #U52-3
UberFlex Lead Wire 18 AWG - 444 strand high purity copper silicone jacket 3 ft
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 1 m (3 ft) - #PS-621
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
SONIC Brass solder-on retainers, inner dia. .050" (1.28 mm),1 pc. - #25-1
Brass solder-on retainers, .050 Retainers 1 pc.
-
SONIC Brass solder-on retainers, for .063" wire (1.6 mm),1 pc. - #25-2
Brass solder-on retainers, .063 Retainers 1 pc.
-
PARMA CONTROLLER SPRING - #368
Replacement trigger spring for PARMA Economy and Sebring Controllers.
-
MID AMERICA Ø3/32" (2.36 mm) rear axle, length 2.25" (57.15 mm), drill blank center flat - #MID520CF
MID AMERICA Ø3/32" (2.36 mm) rear axle, length 2.25" (57.15 mm), drill blank center flat - #MID520CF
3/32 Inline flatted drill blank axle for retro or drag racing. 2.25" long with center flat for gear.
-
KOFORD Ø3/32" (2.36 mm) Narrow flatted ultra-precision axle - #M744
KOFORD Ø3/32" (2.36 mm) Narrow flatted ultra-precision axle - #M744
Precisely ground flats to eliminate spinning and provide perfect dynamic balance. Special steel for twice the strength of drill blank axles and better rust resistance then other unplated axles
-
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle - #M697F
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle - #M697F
EDM drilled and wire cut flatted .060 hollow race axle. Lighter and 50% stronger the M445F
-
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle (length 55 mm) - #M754
KOFORD EDM drilled/wire cut .060" hollow 3/32" rear axle (length 55 mm) - #M754
E24 2.165" (55mm) long EDM drilled and wire cut .060 hole hollow axle with no flats. Light and strong.
-
VITULA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #B1300
VITULA bushings in production chassis, pair
- Outer Diameter: 3/16″ (4.76 mm);
- Inner Diameter: 3/32″ (2.36 mm);
- Length: 2.4 mm.
-
DUBICK Controller spring - #724
DUBICK Controller spring - #724
-
KOFORD Controller wiper button, 1 pc. - #M738
Controller wiper button, 1 pc.
Wiper button for all Koford controllers
-
PARMA CONTROLLER WIPER ARM - #402
Replacement brass wiper arm for all Economy/Sebring/Turbo Controllers
-
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #DB609
DUBICK AXLE Ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded, 7 balls, pair - #DB609
Flanged ballbearings for rear bridge
-
PARMA Ø1/8" (3.15 mm) AXLE, (length 58,2 mm) - #640
Standard steel axle is a replacement for Womps and Flexi Cars. Can be used for most slot cars that require an 1/8" axle that is 2.625" (2-5/8") wide.
-
H&R Ø1/8" (3.15 mm) AXLE, (length 69,5 mm) - #HR303
1/8" (3.15 MM) AXLE, (length 69,5 mm) - #HR303
-
KOFORD Ø1/8" (3.15 mm) drill blank axle, length 2.677" (68 mm) - #M418
KOFORD Ø1/8" (3.15 mm) drill blank axle, length 2.677" (68 mm) - #M418
1/8 axles with the famous Koford precision fit. The same straightness and size control which racers have long enjoyed with 3/32 axles now comes to 1/8 axles
-
REDFOX PRODUCTION 1/24 ALFA ROMEO BODY (ISRA 2017), LEXAN, thickness .005" (0.125 mm) - #RFISRAROMEO5
PRODUCTION 1/24 ALFA ROMEO BODY LEGAL FOR ISRA 2017
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
-
REDFOX PRODUCTION 1/24 ALFA ROMEO BODY (ISRA 2017), LEXAN, thickness .007" (0.175 mm) - #RFISRAROMEO7
PRODUCTION 1/24 ALFA ROMEO BODY LEGAL FOR ISRA 2017
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
PRO SLOT LEAD WIRE 18Ga (section 0,82 mm²), pink, 3 m (10 ft) - #PS-622
DRAGSTER LEAD WIRE WITH CLIPS - 3 meters long with nickel plated guide clips
-
GRW AXLE ballbearing 3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged, shielded, 7 balls, pair - #SF 2380 ZZ
3/32" х 3/16" х 3/32" (2.36 х 4.76 х 2.36 mm) flanged shielded axle ballbearings, 7 balls, pair
High quality, german flanged ballbearings for rear bridge
-
ZHB LANE STICKERS, 10 sheets
ZHB LANE STICKERS, 10 sheets
Lane stickers for model, from 1 to 8 lane
-
ZHB LANE STICKERS, 100 sheets
ZHB LANE STICKERS, 100 sheets
Lane stickers for model, from 1 to 8 lane
-
ZHB PRODUCTION 1/32 MODEL KIT IN THE MAXIMUM CONFIGURATION
This is a kit of production model 1/32 in the maximum configuration: a three-piece JK chassis, 72 pitch, motor: setup with matched magnets + S16C armature + ballbearings + multi-coil springs + washers, tubes instead of clips, lexan body.
-
B52 C-Can Bevelled magnets 0.167" thick, 0.458" long, type 3 (both side is bevelled), pair
B52 C-Can magnets, type 3, pair
-
NeAn Clear body Eurosport 1/24U Audi R8, Lexan .005" (0.125 mm) - #159-L-5
NeAn Clear body Eurosport 1/24U Audi R8
This body is made according to ES-24 rules for chassis Production 1/24
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24U Audi R8, Lexan .007" (0.175 mm) - #159-L-7
NeAn Clear body Eurosport 1/24U Audi R8
This body is made according to ES-24 rules for chassis Production 1/24
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
BPA Clear body Eurosport 1/32 Porsche 917, Lexan .007" (0.175 mm) - #K 022-007
Clear body Eurosport 1/32 Porsche 917
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/32
- Thickness: .007" (0.175 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24U Audi R8, PVC .008" (0.2 mm) - #159-P
NeAn Clear body Eurosport 1/24U Audi R8
This body is made according to ES-24 rules for chassis Production 1/24
- Made from: Polyvinyl chloride (PVC)
- For: Eurosport 1/24
- Thickness: .008" (0.2 mm)
- Clear body
-
BPA Clear body ES G12-32 Mercedes CLK LM, Lexan .005" (0.125 mm) - #K 051
Clear body ES G12-32 Mercedes CLK LM
- Made from: Polycarbonate (Lexan)
- For: ES G12-32
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car, Lexan .005" (0.125 mm) - #161-L-5
Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .005" (0.125 mm)
- Clear body
-
NeAn Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car, Lexan .007" (0.175 mm) - #161-L-7
Clear body Eurosport 1/24 Cadillac Northstar LMP Race Car
- Made from: Polycarbonate (Lexan)
- For: Eurosport 1/24
- Thickness: .007" (0.175 mm)
- Clear body
-
SLICK7 .005X.007 WING KIT - #SL7-170
SL7-170 - .005 X .007 WING KIT
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 pc. - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
KOFORD Air control kit .005" sidedams and .005" spoiler, 1 cd. (6 pc.) - #M203T5
Lastest Pro design air kit with true .005" sidedams and .005" spoiler. For shorter cars
-
PARMA 3/32" (2.36 MM) SQUARE BUSHING, pair - #627
Made from powder bronze.
Replacement square bushings for Flexi Cars, etc. Four positions make it easy to adjust wheel base and ride height
-
SLICK7 3/32" X 1/4" (2.36 X 6.15 MM) AXLE OILITES IN PRODUCTION CHASSIS, pair - #SL7-229
REDUCER BUSHING 3/32 AXLE ON 1/8 AXLE CARS
For order 4 pair min.
-
JK 3/32" X 1/4" (2.36 X 6.15 mm) Axle Precision Machined Adjustable Bushings in Production chassis, pair - #U23
JK 3/32" X 1/4" (2.36 X 6.15 mm) Axle Precision Machined Adjustable Bushings in Production chassis, pair - #U23
Old catalog #JK55711
-
MID AMERICA 3/32" small shoulder adjustable bushing, pair - #MID557
MID AMERICA 3/32" small shoulder adjustable bushing, pair - #MID557
3/32 Round bushings with a small shoulder to adjust height
-
CAHOZA 3 COIL MOTOR SPRINGS STEEL, pair - #255
3 COIL STEEL SPRINGS
Cahoza springs for G12, Cobalt 12, INT15, G27 motors and G7 qualification motors, made from hardened steel coated with white shiny zinc, withstands 800F, these springs have got 8% more tension than the stainless steel springs -
KOFORD Pinion 64 pitch, 11T, 0° angle, 2 mm bore, precision & hardened - #M323-11
KOFORD Pinion 64 pitch, 11T, 0° angle, 2 mm bore, precision & hardened - #M323-11
Features exceptional concentricity providing smoother, more efficient mesh compared to other pinions. Use against plastic spurs only
-
SONIC PINION 64 PITCH, 11T , 0° ANGLE, 2 mm bore - #30-11
SONIC PINION 64 PITCH, 11T , 0° ANGLE, 2 mm bore - #30-11
Made from steel. Special order, from 6 pcs.
11 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision.
-
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611
This is press-on style pinion gear
Old catalog #JK440011
-
ZHB ASSEMBLY OF THE MOTOR (w/out price of parts & shaft lapping) - #103
Assembly and repair of the any motors under special order
-
ZHB LAPPING ARMATURE SHAFT TO DIA. 1,5 mm - #104
ZHB LAPPING ARMATURE SHAFT TO DIA. 1,5 mm - #104
-
JConcepts Precision curved scissors, stainless steel blades, black handles - #2373
JConcepts Precision curved scissors, stainless steel blades, black handles
Cutting polycarbonate, soft plastic, soft rubber, fabric and thin paper products are what scissors are intended for.
-
JK Wiper arm with wiper button - #N4
JK Wiper arm with wiper button
Old catalog #JK80814
-
KOLHOZA .050" tire and gear wrench with 9 mm guide nut tool - #KZA037
KOLHOZA .050" tire and gear wrench with 9 mm guide nut tool - #KZA037
-
ZHB Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
-
KOLHOZA Stand for installation body on Production 1/24 JK 4" "Cheetah X25" chassis - #KZA032
KOLHOZA Stand for installation body on Production 1/24 JK 4" "Cheetah X25" chassis - #KZA032
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 38 DEG - #468-BOX-38
Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
JK Lane Stickers (8 sheets) - #S1-8
JK Lane Stickers (8 sheets) - #S1-8
LANE STICKERS - 8SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150
-
JK Lane Stickers, (200 Sheets) - #S1-200
JK Lane Stickers, (200 Sheets) - #S1-200
LANE STICKERS - 200SHEETS W/LANE# AND CHANGE INFO
Old catalog #JK150B
-
KOLHOZA Stand for installation body on Production 1/24 JK Cheetah Aeolos 4" chassis - #KZA033
KOLHOZA Stand for installation body on Production 1/24 JK Cheetah Aeolos 4" chassis - #KZA033
-
WELLER 1/4" Thread on chisel tip - #PL151
WELLER 1/4" Thread on chisel tip - #PL151
-
MID AMERICA Double plated solder iron tip - #MID120
MID AMERICA Double plated solder iron tip - #MID120
replacement tip for the MID118 iron
-
WRIGHTWAY LEAD WIRE 18Ga (0,82 mm²), 2.4 m (8 ft), SUPER LIGHT - #WWML
WWML - 18 gauge, thinner insulation, super light silicone insulation. 402 strands seems to center the guide after wrecks better then what's available now. 8 foot lengths.
-
SONIC 3/32" (2.36 mm), .060" (1.54 mm) thick, plastic axle spacers, 1 pc. - #SON320-060
Parameters:
- Axle: 3/32" (2,36 mm);
- Thickness: 0.060" (1,54 mm);
- Made from: plastic;
- Quantity: 1 pc.
-
KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733
KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733
-
KOFORD 3/32" (2.36 MM) .100" (2.54 MM) LONG, ALUMINUM SPACERS, 6 psc. - #M625
.100 long machined aluminum spacer for 3/32 axles. 6 per bag.
-
JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845
JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845
Old catalog #JK4345
-
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #SK4580
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm - #SK4580
-
PARMA CURVED SCISSORS FOR LEXAN - #10398
Curved Lexan Scissors
-
WRIGHTWAY DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD
-
HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P
HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P
-
UHU CONTACT GLUE Schuh&Leder FOR TIRES, flacon 33 ml
Excellent glue for tires, better than the "moment" and "88".
-
DUBICK UHU CONTACT GLUE Schuh&Leder FOR TIRES, flacon 33 ml - #DB700
Excellent glue for tires, better than the "moment" and "88".
-
CAHOZA TORNADO 2 MAGNETS (C-CANS), 1 pair - #275
NEW CAHOZA TORNADO 2 MAGNETS
these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA -
CAHOZA TORNADO 2 (C-CANS) BEVELED MAGNETS, pair - #276
NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
CAHOZA TORNADO 5 MAGNETS (C-CANS), 1 pair - #277
CAHOZA TORNADO 5 MAGNETS
these popular magnets are identical as #275 (Tornado 2 magnets) but specially recharged, selected for maximum strength and matched, weight 6,58 grammes, Tornado 5 magnets are marked with yellow dot, magnets are legal for USRA and ISRA -
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667
KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667
Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner.
-
HAKKO Replacement tip 13/64" (5.15 mm), FX-888/907-900M/913 - #18-S3/P
Replacement tip 13/64" (5.15 mm), FX-888/907-900M/913
Chisel tip - This tip is used with the following Hakko Soldering Stations and Systems: * Hakko FX-888 Soldering Station * Hakko 907 Soldering Iron * Hakko 900M Soldering Iron * Hakko 936 Soldering Station * Hakko 937 Soldering Station
-
WRIGHTWAY DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
DIAMOND CUTTING TOOLS, 15 pcs. - #WW26
15 pieces FITS MOST MOTO TOOLS
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø11 mm - #BSV16112
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 11 mm.
-
BSV Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.09 mm - #BSV724416
BSV Gear 72 pitch, 44T, 16° angle, 3/32" axle, Ø16.09 mm - #BSV724416
-
S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A
S&K Gear 72 pitch 44 teeth, 16° angle, 3/32" axle, Ø15.8 mm - #SK4472A
-
S&K 80 PITCH 45T, 0° angle, 2 mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#208
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, for gluing - #SK4580G
S&K Gear 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, for gluing - #SK4580G
-
PARMA FLAMING DECAL SHEET - #10767
Many sets of logos to detail your stock cars, trucks, etc.
Sheet size 150x200 mm. They're printed on a thin, transparent film with a white substrate.
-
PARMA DRAG RACING DECAL SHEET - #747
Many sets of logos to detail your stock cars, trucks, etc.
Sheet size 150x200 mm. They're printed on a thin, transparent film with a white substrate.
-
JK Front wheels for F1/32, 0.680"D 0.530"H 0.250"W 3/32"Axle (Ø17,27 mm, rimSz 13,46 mm, width 6,35 mm, axle 2,36 mm), pair - #T109F
JK Front wheels for F1/32, pair - #T109F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.250" (6,35 mm)
- Dia.: 0.680" (17,27 mm)
- Rims material: plastic
- For classes: F1/32 (JKP F 1/32 "CHEETAH 11 CHASSIS KIT" or "B.S.V KIT for assembly F1/32) & for FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK87461PF
-
SLOTLAB SPONSOR#14 STICKERS SHEET - #MS014
Size 60х75 mm. Printed on a transparent film with 2 layers - bottom white, top color
-
S&K 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6 mm glued on 3/32" axle ProSlot - ZHB#214
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.02 mm - #SK3964
S&K GEAR 64 PITCH, 39T, 0° angle, 3/32" axle, Ø16.02 mm - #SK3964
-
CAHOZA Brass guide clips short, pair - #333
CAHOZA Brass guide clips short, pair - #333
NEW!!!
These clips perfectly fit new long guide, manufactured from tough brass plate, thickness 0,25mm (.01"), lead wires are soldered through windows in guide
-
DUBICK 2 mm, .04" (1 mm) thick aluminium axle spacer, 1 pc. - #713-1
DUBICK 2 mm, .04" (1 mm) thick aluminium axle spacer, 1 pc. - #713-1
-
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
DUBICK 2 mm, .059" (1,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-1.5
-
BSV CROWN GEAR 72 pitch, 33 teeth, 3/32" axle, black - #BSVF7233
BSV CROWN GEAR 72 pitch, 33 teeth, 3/32" axle, black - #BSVF7233
-
CAHOZA BRASS GUIDE CLIPS SHORT, pair - #29
guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered through windows in guide
-
JK Ø1/8" (3.15 mm) axle, length 2.175" (55 mm) - #A4
JK Ø1/8" (3.15 mm) axle, length 2.175" (50,8 mm) - #A4
1/8" x 2.175" Precision Ground True Drill Blank Axle, High Hardnes
Old catalog #JK5511
-
JK Ø1/8" (3.15 mm) axle, length 2.175" (55 mm), 6 pcs. - #A4-6
JK Ø1/8" (3.15 mm) axle, length 2.175" (50,8 mm), 6 pcs. - #A4-6
1/8" x 2.175" Precision Ground True Drill Blank Axle, High Hardnes
Old catalog #JK5511
-
KELLY Racing Tires STAN'S OIL
KELLY Racing Tires STAN'S OIL
-
SRT Ø1/8" (3.15 mm) drill blank axle, length 2.75" (69.85 mm) - #SRT10000
SRT Ø1/8" (3.15 mm) drill blank axle, length 2.75" (69.85 mm).
Heavy duty drill blank axle is a replacement for Womps and Flexi Cars. Can be used for most slot cars that require an 1/8" axle that is 2.75" long.
-
LOCTITE THREADLOCK LOCTITE 243 for fixing motor screws, 5 ml - #31415
Allows not to worry about the loss of the motor screws in the race.
Medium Strength:
It is possible to dismantle with a conventional hand tool, but with great effort. It is used in threaded joints of machine tools, presses, pumps and compressors, gearboxes. The permitted thread size is up to M8 -
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .007" (0.175 mm), size 50x180 mm - #DB2071
Lexan for body reinforcement
Parameters
- Thickness: .007" (0.175 mm)
- Size: 50x180 mm
-
DUBICK LEXAN (POLYCARBONATE) FOR BODY REINFORCEMENT, W/STICKY LAYER 3M, thickness .010" (0.25 mm), size 50x180 mm - #DB2072
Lexan for body reinforcement
Parameters
- Thickness: .010" (0.25 mm)
- Size: 50x180 mm
-
ZHB REINFORCED TAPE (w/linear reinforcement), 12 mm x 50 m - #922
A great option for the beginning racers!
-
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
DUBICK 3M reinforced strapping tape, linear reinforcement, 12 mm x 50 m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), blue, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), blue, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
-
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
DUBICK 2 mm, .079" (2 mm) thick aluminium axle spacer, 1 pc. - #DB713-2
-
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
DUBICK 2 mm, .098" (2,5 mm) thick aluminium axle spacer, 1 pc. - #DB713-2.5
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), black, 1 m (3 ft.), insulation diameter .12" (3,08 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), black, 1 m (3 ft.), insulation diameter .12" (3,08 mm)
-
CAHOZA ALUMINUM HARD NICKEL BRUSH HOODS, set - #266
ALUMINIUM NICKEL PLATED BRUSH HOODS
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise -
KOLHOZA Stand for installation body on Production 1/32 JK "Cheetan 11" chassis - #KZA034
KOLHOZA Stand for installation body on Production 1/32 JK "Cheetan 11" chassis - #KZA034
-
WRIGHTWAY Plastic custom motor case with foam insert for 14 C/D-group motors - #WW18
WRIGHTWAY Plastic custom motor case with foam insert for 14 C/D-group motors - #WW18
Plastic Custom Motor Case with foam insert that has cutouts for 14 C and D size can motors.
-
KOLHOZA Body installation stand for JK Cheetah 21 chassis - #KZA035
KOLHOZA Body installation stand for JK Cheetah 21 chassis
-
KOFORD T-SHIRT, SIZE- XXXL - #M204-XXXL
KOFORD T-SHIRT, SIZE- XXXL
A fine T-shirt made from cotton! It does not stretch, even after a lot of washing.
-
RED FOX Clear Production 1/32 Panoz HD body, Lexan thin .007” (0.175 mm) - #RFSC49C
Clear Production 1/32 Panoz HD body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body.
-
RED FOX Clear Production 1/32 Porsche HD body, Lexan thin .007” (0.175 mm) - #RFSC50C
Clear Production 1/32 Porsche HD body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body.
-
SLICK7 3/32" (2.36 mm) .100" (2.54) long, aluminum spacers, 4 pcs. - #S7-284
SLICK7 3/32" (2.36 mm) .100" (2.54) long, aluminum spacers, 4 pcs.
-
DUBICK Set #2 of 2 mm inside diameter aluminium tubes (1 mm (.04"), 1.5 mm (.059"), 2 mm (.079"), 2.5 mm (.098")) - #713
DUBICK Set #2 of 2 mm inside diameter aluminium tubes (1 mm (.04"), 1.5 mm (.059"), 2 mm (.079"), 2.5 mm (.098")) - #713
In set 2 pc of each size: 1 mm (.04"), 1.5 mm (.059"), 2 mm (.079"), 2.5 mm (.098").
-
KOFORD 3/32" (2.36 mm) .160" (4.06 mm) long, aluminum spacers, 6 psc. - #M734
.160 long machined aluminum spacer for 3/32 axles. 6 per bag.
-
KOFORD 3/32" (2.36 MM), .175" (4.45 MM) LONG, PLASTIC AXLE SPACER, 1 pc. - #M449
Plastic axle spacer for narrow motor box cars with 3/32 axles. A snug fit on the axle so that it doesn't fall off
-
HAKKO Replacement tip for soldering station #936, 7/32" (5.55 mm) - #900L-T-S1/P
Replacement tip for soldering station #936, 7/32" (5.55 mm)
Replacement Hakko 900L Tip PN: 900L-T-S1 TIP,7/32in. D,900L/908/914
-
HAKKO Replacement tip T19-D65 w. 6.5 mm, for FX-601 soldering iron - #T19-D65/P
Replacement tip 6.5 mm, for FX-601 soldering iron
Chisel tip 6.5 x 18mm / Hakko T19 Series soldering iron tips, used with the Hakko FX601-01 temperature adjustable soldering iron.
-
ZHB SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE
SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE.
Very need thing to soldering iron, preventing burning out by them surrounding objects. Also viscose spoge could clean soldering iron tip from all debris
-
JK Armature for HAWK #M3 motor - #M3A
JK Armature for HAWK #M3 motor - #M3A
Basic HAWK motor armature. It can be used in Proslot EURO MK motors
Old catalog #JK30302
-
TURNIGY Lead wire 16Ga (section 1,31 mm²), red, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
TURNIGY Lead wire 16Ga (section 1,31 mm²), red, 1 m (3 ft.), insulation diameter .12" (3,04 mm)
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), orange 1 m (3 ft) - #TQ1630
3 feet (1 m) orange - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), black 1 m (3 ft) - #TQ1631
3 feet (1 m) black - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), blue 1 m (3 ft) - #TQ1632
3 feet (1 m) blue - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), red 1 m (3 ft) - #TQ1634
Very soft lead wire, perhaps, it can use in some wing classes or in drag-racing.
Good choise for power supply unit or controllers!
-
TQ LEAD WIRE 16Ga (section 1,31 mm²), yellow 1 m (3 ft) - #TQ1636
3 feet (1 m) yellow - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.
-
CAHOZA 5 coil stainless steel springs, 1 pair - #161
CAHOZA 5 coil stainless steel springs, 1 pair - #161
Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F
-
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266
hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling
-
PROSLOT 16D/S16D REPLACEMENT POLYMER ENDBELL - #PS 2008
16D/S16D REPLACEMENT POLYMER ENDBELL
-
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
CAHOZA Motor screw 0/80" stainless steel, 24 pcs. - #325
use for attaching Aluminium endbells to steel cans, thread length is 1,75mm (.069"), bolt head height is 1mm (.039"), for T5 driver, packed 24 pcs per bag
-
KOFORD 0-80X3/32 ALUMINUM CAN & ENDBELLS SCREWS, FOR ALLEN KEY, 24 pcs. - #M256
0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.
-
KOFORD SETUP FOR EUROSPORT MOTORS, EXTERNAL DIA. .620" (15.75 MM), HEIGHT .430" (10.9 MM), NICKEL-PLATED -#M652
SETUP FOR ASSEMBLY EUROSPORT MOTORS, NICKEL-PLATED
PARAMETERS:
- EXTERNAL DIA. .620" (15.75 MM)
- HEIGHT .430" (10.9 MM)
-
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1
Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars
-
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7
KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7
Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars
-
BPA Clear body G7, G27 Stratos, lexan, thickness .005" (0.125 mm) - #K 041
Clear body G7, G27 Stratos
- Made from: Polycarbonate (Lexan)
- For: G7
- Thickness: .005" (0.125 mm)
- Length: 5.807" (147.5 mm)
- Width: 3.11" (79 mm)
- Clear body.
-
ARP PINION 72 PITCH, 7T, 0° angle, 2 mm bore - #ARP7207
72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness.
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore
-
CHAMPION Astro chassis RTR kit - no body - #C140
CHAMPION Astro chassis RTR kit - no body - #C140
1/24 scale
-
CAHOZA BRASS GUIDE CLIPS LONG, pair - #30
GUIDE CLIPS LONG - guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered onto the top side of the clip
-
TQ Lead wire 16Ga (section 1,31 mm²), orange 1.5 m (5 ft) - #TQ950
TQ Lead wire 16Ga (section 1,31 mm²), orange 1.5 m (5 ft) - #TQ950
Orange drag lead wire 5 foot lengths. 16 gauge, 665 strand bare copper conductor. Thin wall silicone insulation for light weight. Designed to deliver higher performance for drag cars.
-
S&K Power supply leads 16Ga (section 1,31 mm²), "banana" clips from one side/ "alligator" clips from other, 0,8 m - #0109
S&K Power supply leads 16Ga (section 1,31 mm²) w/clips, 0,8 m - #0109
16 gauge wire with small 4 mm banana plugs and alligator clips, 0,8 m long - same as that comes with their power supply.
-
TURNIGY Lead wire 14Ga (section 2,08 mm²), black, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
TURNIGY Lead wire 14Ga (section 2,08 mm²), black, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
-
TURNIGY Lead wire 14Ga (section 2,08 mm²), red, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
TURNIGY Lead wire 14Ga (section 2,08 mm²), red, 1 m (3 ft.), insulation diameter .136" (3,46 mm)
-
TURNIGY Lead wire 14Ga (section 2,08 mm²), orange, 1 m (3 ft.), insulation diameter .139" (3,54 mm)
TURNIGY Lead wire 14Ga (section 2,08 mm²), orange, 1 m (3 ft.), insulation diameter .139" (3,54 mm)
-
TURNIGY Lead wire 12Ga (section 3,31 mm²), transparent, 1 m (3 ft.), insulation diameter .166" (4,21 mm)
TURNIGY Lead wire 12Ga (section 3,31 mm²), transparent, 1 m (3 ft.), insulation diameter .166" (4,21 mm)
-
TURNIGY Lead wire 12Ga (section 3,31 mm²), black, 1 m (3 ft.), insulation diameter .165" (4,19 mm)
TURNIGY Lead wire 12Ga (section 3,31 mm²), black, 1 m (3 ft.), insulation diameter .165" (4,19 mm)
-
TURNIGY Lead wire 12Ga (section 3,31 mm²), red, 1 m (3 ft.), insulation diameter .162" (4,14 mm)
TURNIGY Lead wire 12Ga (section 3,31 mm²), red, 1 m (3 ft.), insulation diameter .162" (4,14 mm)
-
TURNIGY Lead wire 12Ga (section 3,31 mm²), blue, 1 m (3 ft.), insulation diameter .175" (4,46 mm)
TURNIGY Lead wire 12Ga (section 3,31 mm²), blue, 1 m (3 ft.), insulation diameter .175" (4,46 mm)
-
TURNIGY Lead wire 10Ga (section 5,26 mm²), black, 1 m (3 ft.), insulation diameter .194" (4,95 mm)
TURNIGY Lead wire 10Ga (section 5,26 mm²), black, 1 m (3 ft.), insulation diameter .194" (4,95 mm)
-
TURNIGY Lead wire 10Ga (section 5,26 mm²), red, 1 m (3 ft.), insulation diameter .197" (5,02 mm)
TURNIGY Lead wire 10Ga (section 5,26 mm²), red, 1 m (3 ft.), insulation diameter .197" (5,02 mm)
-
TURNIGY Lead wire 8Ga (section 8,37 mm²), black, 1 m (3 ft.), insulation diameter .233" (5,92 mm)
TURNIGY Lead wire 8Ga (section 8,37 mm²), black, 1 m (3 ft.), insulation diameter .233" (5,92 mm)
-
TURNIGY Lead wire 8Ga (section 8,37 mm²), red, 1 m (3 ft.), insulation diameter .24" (6,12 mm)
TURNIGY Lead wire 8Ga (section 8,37 mm²), red, 1 m (3 ft.), insulation diameter .24" (6,12 mm)
-
PARMA 1/8" х 1/4" (3.15 х 6.15 MM) FLANGED OILITES, pair - #623S
Replacement pair of Bushing Oilites for Turbo Controller Trigger (Requires one pair). Also for adding 1/8" diameter axle to slot car chassis with 1/4" hole.
-
Шасси ES24 (Open 12) Brian Solders
Очень хорошее английское шасси. Подходит для класса ES24, но также встает мотор х12.
-
CAHOZA PROF GOLD PLATED BRUSH HOODS, set - #268
NEW PROFESSIONAL ALUMINIUM GOLD PLATED BRUSH HOODS
total new professional hardware (brush hoods) with heatsinks, made from hard aluminium plate with thickness of 0.4mm (.0157"), gold plated, hand work, most precise -
JK Pinion 64 pitch, 11T , 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea) - #P611-6
JK Pinion 64 pitch, 11T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear (6 ea)
This is press-on style pinion gear
Old catalog #JK440011
-
PARMA FASLUCENT PURPLE PAINT - #40311
Our new line of transparent paint colors can be backed with new FASKROME for a deep metallic candy effect. It can also be backed with other colors or different combinations for many unique effects. These colors are also great for tinting windows and for use as a lightweight paint for race bodies. 20z/60ml bottle. Waterbased, non-toxic.
-
PARMA FASLUCENT GREEN PAINT - #40305
Our new line of transparent paint colors can be backed with new FASKROME for a deep metallic candy effect. It can also be backed with other colors or different combinations for many unique effects. These colors are also great for tinting windows and for use as a lightweight paint for race bodies. 20z/60ml bottle. Waterbased, non-toxic.
-
KOFORD DC POWER GRINDING/DRILL TOOL "MINICRAFT", 15V - #M413
Koford Grinder/Drill. Allow using all standard dremel style accessories, Runs off 12V power supply. Lightweight for easy storage and portability
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), 88 х 117 mm, acrylic- #DB203-23
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
PARMA FASKLEANER, bottle (60 ml) - #40202
FASKLEANER is the perfect clean-up for your airbrush. Cleans your airbrushes or paintbrushes. FEATURES: Makes cleanup of FASKOLOR paints much easier.
-
PARMA FASCHANGE RED PAINT - #40185
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
PARMA FASCHANGE PURPLE PAINT - #40180
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip
-
PARMA FASESCENT CANDY RED PAINT - #40153
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
PARMA FASPEARL RED PAINT - #40056
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
PARMA FASPEARL CHARCOAL PAINT - #40054
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
PARMA FASPEARL GOLD PAINT - #40053
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip
-
PARMA FASDARK BROWN PAINT - #40014
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
PARMA FASBURGUNDY PAINT - #40013
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
PARMA FASGREEN PAINT - #40005
FEATURES: Fuel-Proof, Water Based Formula For Easy Clean-Ups. Many Colors For Painting Slot and R/C Car Bodies, Plastic Models. Pinewood Derby Cars, Boats, Scenery, Signs and Ceramics. It remains flexible and resists cracking, chipping and impact damage. Can be used with any air-brush that delivers over 40 to 70 psi, and Uses a MEDIUM tip.
-
TAMIYA PS-33 CHERRY RED - #TAM86033
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-34 BRIGHT RED - #TAM86034
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-35 BLUE VIOLET - #TAM86035
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-36 TRANSLUCENT SILVER - #TAM86036
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-40 TRANSLUCENT PINK - #TAM86040
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-43 TRANSLUCENT ORANGE - #TAM86043
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-44 TRANSLUCENT GREEN - #TAM86044
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-48 METALLIC SILVER - #TAM86048
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-50 SPARKLING PINK - #TAM86050
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-51 PURPLE ALUMINUM SPRAY - #TAM86051
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-53 SPRAY CAN GOLD FLAKES - # TAM86053
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-54 COBALT GREEN - #TAM86054
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-55 FLAT CLEAR - #TAM86055
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-56 MUSTARD YELLOW SPRAY - #TAM86056
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-59 DARK METALLIC BLUE - #TAM86059
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS-61 METALLIC ORANGE - #TAM86061
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
TAMIYA PS ANODIZED GREEN - #TAM89911
These spray paints were developed especially for decorating transparent polycarbonate bodies used in SRC & R/C car modeling.
Each can contains 100ml of paint, which is the appropriate amount for finishing a model.
-
ZHB Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
-
Шасси ES24 Brian Solders новое
Популярное в Америке и Англии шасси. Не проехало ни одной гонки, только тестировалось. Собрано Одненко Костей.
-
CHICAGOLAND RACEWAY 3/32" (2.36 mm) x .400" (10.16 mm) Brass pre-cut axle spacer / hub-adapter (3/32" -> 1/8"), 1 pc. - #CR011
CHICAGOLAND RACEWAY 3/32" (2.36 mm) x .400" (10.16 mm) Brass pre-cut axle spacer / hub-adapter (3/32" -> 1/8"), 1 pc.
It is convenient when setting the gear gap to F1 / 32, if there is a dremel, you can make a spacer of the required width.
It can also be used as an hub-adapter 3/32 "-> 1/8"
-
ARP Phenolic axle spacer bearing shields 3/32" (2,36 mm) x .250 (6,35 mm) OD, 10 pcs. - #arp-pbs-1
ARP Phenolic axle spacer bearing shields 3/32" (2,36 mm) x .250 (6,35 mm) OD, 10 pcs. - #arp-pbs-1
Phenolic axle spacer shields to protect bearings on retro front tires. 3/32 id x .250 od - 10 pieces per bag
-
HORKY PINION 80 PITCH, 6T, 1.5 mm bore, EDM
HORKY PINION 80 pitch 6 teeth, EDM, shaft 1.5 mm
Electrical discharge machining (EDM)
-
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A
CAHOZA black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A
-
ARP PINION 72 PITCH, 8T, 0° angle, 2 mm bore - #ARP7208
72 pitch stainless steel 8 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP PINION 72 PITCH, 9T, 0° angle, 2 mm bore - #ARP7209
72 pitch stainless steel 9 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP Pinion gear 48 pitch, 10T, 2 mm bore, steel - #arp4810s
ARP Pinion gear 48 pitch, 10T, 2 mm bore, steel - #arp4810s
48 pitch Straight stainless steel 10 tooth pinion gears
-
DUBICK PINION 48 PITCH, 11T, 0° angle 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-11
DUBICK PINION 48 PITCH, 11T, 0° angle 2 mm bore, BRASS
This is press-on style pinion gear
-
SONIC PINION GEAR 48 PITCH, 11T , 2 mm bore, STEEL - #3048-11
SONIC PINION GEAR 48 PITCH, 11T , 2 mm bore, steel - #SON3048-11
11 tooth 48 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision
-
ARP Pinion gear 48 pitch, 11T, 2 mm bore, steel - #arp4811s
ARP Pinion gear 48 pitch, 11T, 2 mm bore, steel - #arp4811s
48 pitch Straight stainless steel 11 tooth pinion gears
-
BSV Pinion gear 48 pitch, 12T, 0° angle, 2 mm bore, PLASTIC- #BSVP4812
BSV Pinion gear 48 pitch, 12T, 0° angle, 2 mm bore, PLASTIC- #BSVP4812
-
JK Tube - front tire w/cap, small < 0.80" dia. tires (20,3 mm.) - #U56
JK Tube - front tire w/cap, small - #U56
- Height: 1,57" (40 mm);
- Dia.: 0.9" (23 mm);
- Dia. tires: < 0.80" (20,3 mm.)
-
JK Tube - thin w/cap < 0.80" dia. tires (20,32 mm.) - #U59
JK Tube - thin w/cap - #U59
- Height: 2.188" (55,58 mm);
- Dia.: .915" (23,25 mm);
- Dia. tires: < 0.8" (20,32 mm.)
-
JK Tube - regular w/cap < 0.96" dia. tires (24,4 mm.) - #U58
JK Tube - regular w/cap - #U58
- Height: 2.20" (56,05 mm);
- Dia.: 1.07" (27,26 mm);
- Dia. tires: < 0.96" (24,4 mm.)
-
WRIGHTWAY .050" ALLEN WRENCH W/GUIDE TOOL 9,5 mm, anodized
WRIGHTWAY .050" ALLEN WRENCH W/GUIDE TOOL 9,5 mm, anodized
-
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27
PARAMETERS
- Dia. of wheels bottles, mm: 27 (PSE, Alpha Large)
- Quantity of holes for bottles, pcs: 12
- Size, mm: 103x137
- Material: acrylic
-
RED FOX Silver controller wiper button, 1 pc.
RED FOX Silver controller wiper button, 1 pc.
-
ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105
ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105
-
ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106
ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106
-
ZHB PAINTING BODY BY AIRBRUSH - #107
Painting bodies by water-based paints PARMA, under special order.
-
MACK 1/32 Chassis GENESIS, FALCON-group motor, without ballbearings
MACK 1/32 Chassis GENESIS, FALCON-group motor, without ballbearings
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), blue - #L10
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), blue
The necessary thing for any racers!!
Hudy style aluminum handle with .050 allen tip and 3/8" nut driver guide tool
Old catalog #JK8042
-
Kolhoza T-shirt - #KZA038
Kolhoza T-shirt. All sizes are available by special order! Write to us for any questions!
-
ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108
ZHB PREPARING BODY TO RACE (CUTTING, STRENGTHENING & INSTALLATION ON THE MODEL) - # 108
-
HUDY LATHE FOR SLOT ARMATURES - HSG
Special order!
The best lathe for grooving commutators.
You can visit the following link to find more information about this item:
-
ZHB STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
STAND SLOTLAB #TCS_Alpaha FOR STORAGE WHEELS BOTTLES Ø23.5 mm (JK, Alpha), W/12 BOTTLES, 88 х 117 mm, acrylic
PARAMETERS
- Dia. of wheels bottles, mm: 23,5 (JK, Alpha)
- Quantity of holes for bottles, pcs: 12
- Quantity of bottles, pcs: 12
- Size, mm: 88x17
- Material: acrylic
-
HUDY AXIAL SUPPORT for 101100 - #101906
Special order!
Option HUDY support for grooving of any length of armatures
-
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø5.2 mm - #039
Only for special order
-
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø5.4 mm - #039
VOKI MOTOR BRUSH RADIUS DIAMOND TOOL ON SHAFT 2 mm, Ø5.4 mm - #039
-
DUBICK Diamond motor brush tool (for shunting) - #766
DUBICK Diamond motor brush tool (for shunting) - #766
-
DUBICK MG TOOL FOR PREPARING MOTOR BRUSHES W/DIAMOND WHEEL- #DB201
A tool that every modelist needs! With it's help quickly and accurately prepare motor brushes for any motors! Comes with a diamond wheel
Tool for motor brushes (horizontal or vertical). A more advanced design of the turtle. includes anodised knurled grip and diamond coated brush radius tool diameter 5,2 mm (.208")
-
WRIGHT WAY Plastic custom motor case with foam insert for 14 Cobalt/HAWK motors - #WW19
Plastic custom motor case with foam insert for 14 Cobalt/HAWK motors
Plastic Custom Motor Case with foam insert that has cutouts for 14 Cobalt or Hawk/FK/Falcon size motors.
-
PARMA FASKOLOR F-1 AIRBRUSH - #40260
PARMA FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
ALPHA Tubes for wheels (dia. about 28.1 mm, hei. 50.8 mm) - #BTLS-7
ALPHA Tubes for wheels, big
Parameters:
- Diameter, mm: 28.1
- Height, mm: 50.8
-
JK Tube - large w/cap < 1.10" dia. tires (28 mm.) - #U57
JK Tube - large w/cap - #U57
- Height: 2.79" (71,4 mm);
- Dia.: 1.22" (31,24 mm);
- Dia. tires: < 1.10" (28 mm.)
-
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
DUBICK F1 motor adjustment tool for crowns gears with 2 mm axle, 1.5 mm motor shaft and 0.2 mm offset - #DB711
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
DUBICK Engineering F1 motor adjustment tool for crowns gears with 3/32" (2.36 mm) axle, 1.5 mm motor shaft and 0.2 mm offset
Special for 5 and 6 teeth 72 pitch pinions. 0.2 mm offset allow instal down F1 motor for more low center of gravity, but not so dangerous like 0.5 mm offset.
-
S&K F1 motor adjustment tool for offset crowns with 2 mm axle - #0104
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 2 mm
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
Клипсы для проводов в токосъемник из посеребренной меди, длинные, пара - #SL7-209
Клипсы для пайки проводов сверху токосъемника.
-
TWP Standard brass guide nut - #TWPPOA-002
TWP Standard brass guide nut - #TWPPOA-002
-
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
JK .050" allen wrench w/guide tool 3/8" (9.5 mm), 4.5" long reach 2mm shaft, blue - #L70
Tire & Gear Wrench w 3/8" Guide Tool, 4.5" long reach 2mm Shaft, 0.050" Precision Tolerance Tip HRC Hardened
-
HUDY Allen wrench .050" (4/40) and guide nut tool 3/8" (9.5 mm) - #125095
Type: Allen Wrench - Inch + Nut Tool
Series: Ultimate Professional R/C Tools
Tip size: .050"
Tip length: 30mm
Nut size: 3/8"
Special tool for Slot cars -
DUBICK .050" Aluminium allen wrench w/guide tool 3/8" (9,5 mm), anodized - #DB604
DUBICK .050" Aluminium allen wrench w/guide tool 3/8" (9,5 mm), anodized - #DB604
-
BSV Gear 48 pitch, 38T, 0° angle, 3/32" axle - #BSV4838
BSV Gear 48 pitch, 38T, 0° angle, 3/32" axle - #BSV4838
-
MS-SLOTPARTS Powered brush tool for radius and slot for horizontal and verticat brushes (special order!)
MS-SLOTPARTS Powered brush tool for radius and slot for horizontal and verticat brushes (special order!)
Powered brush tool of the extra class in a noble carbon look.
For exact grinding of the radius and the slot on horizontal and vertical brushes. The tools are driven by two separate motors. External power supply 3Volt DC (not included). -
S&K F1 motor adjustment tool for offset crowns with 3/32" axle - #0103
CONDUCTOR FOR SET THE MOTOR ON F1, WITH THE CENTER SHIFTED DOWN BY 0,5 MM, motor shaft 1,5 mm, rear axle 3/32"
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis, after which the motor is soldered.
-
SONIC Double ended wrench - .050 and .078 tips - #51-5078
SONIC Double ended wrench - .050 and .078 tips - #51-5078
After machining, we finish your Sonic Pro-Wrench with high quality anodizing and laser marking. We then assemble your Sonic Pro-Wrench with the finest drill blank tips available. Our Double Ended Pro-Wrench has both a .050″ and a .078″ tip installed.
The .050 tip has a reduced shank diameter so it can be used with Euro-style wheels with ease
-
CAHOZA .050" ALUMINIUM ALLEN WRENCH - #66
Very accurate and convenient wrench!
ALUMINIUM WRENCH WITH GUIDE NUT TOOL 9
aluminium wrench with .05" tip and guide nut tool, anodised and knurled for better gripping, for 9mm (.354") guide nut
-
PARMA FASKOLOR F-1 PRO DUAL ACTION - #40260GF
Our FASKOLOR F-1 Dual Action Airbrush is designed with a medium tip which delivers a smooth spray and broad range of fine to heavy coverage. The dual action trigger is easy to use (push down for air, pull back for paint) and achieve great results for the beginner to seasoned body painter. The FASKOLOR Bottle Adaptor makes it easy to plug a paint bottle into the airbrush for quick coverage and ease of use (this requires 40-50lbs of air pressure. We suggest also purchasing our 1/4 Oz Color Cup #40278 for spraying or mixing small amounts of paint. The Color Cup also requires less air pressure for finer lines and faster clean up. This kit includes an Airbrush, Air Hose with 3/8" Brass Compressor Adaptor, Airbrush Holder, Bottle Adaptor and Mixing Bottle (not shown). All replacement parts are available. Made in USA
-
JK 1/32 F1 cheetah 11 chassis kit - #C62
JK 1/32 F1 cheetah 11 chassis kit
A beautiful alternative for club races
Designed for HAWK motor, but it is possible to install any motor that falls under the arm :)
Old catalog #JK25141
-
ZHB SET OF 2 AIRBRUSHES & PARTS TO THEM
SET OF 2 AIRBRUSHES & PARTS TO THEM
Use this airbrushes with high quality paints, you can paint your bodies at home & win beauty contest:)
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 3/32" - DB#200-3/32-2
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 2 mm, rear axle 2 mm - DB#200-2-2
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
ZHB CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
CONDUCTOR FOR SET THE MOTOR ON F1, motor shaft 1,5 mm, rear axle 2,36 mm - DB#200-st-1.5
Convenient tool for accurate and fast installation of the motor on F1: fixes the center of the motor shaft and the axis of the rear wheels in the same plane, after which the motor is soldered.
-
KOFORD AXLE BEARING INSTALATION SPRING - M634
Coil spring for aligning axle bearings - Perfect rear axle bearing alignment - Slide over axle and slide through axle holes in chassis. Slide on bearings in place and square. Solder bearings from the inside of pillow blocks.
-
MTT TRACK (RACE) MANAGER
Track (race) manager. Works with software SPYTECH
-
ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - #109
More & more sportsmen use gears glued on axle. It's connected with decrease imbalance, caused clamping of the screw and possibility use rims without offset of the hub in ES-32
Just let us know what gears and axle you need - and we will be work for you!
-
SPYTECH RACE MANAGER
Recognized worldwide software with a track control unit.
-
SLICK7 REINFORCED STRAPPING TAPE, 12 mm x 22 m - #S7-575
Excellent strapping tape. Takes up little space.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 12 mm x 50 m - #DB2073
3m Reinforced strapping tape, 12mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 25 mm x 50 m - #DB2074
3m Reinforced strapping tape, 25mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
DUBICK 3M REINFORCED STRAPPING TAPE, 50 mm x 50 m - #DB2075
3m Reinforced strapping tape, 50mm x 50m
The original American 3M. Reinforced with nylon tape. The best material for reinforcing and repairing polycarbonate and plastic models bodies.
-
CHICAGOLAND RACEWAY Double stick tape - #CR096
CHICAGOLAND RACEWAY Double stick tape - #CR096
-
WIHA PRECISION TORX SCREWDRIVER T5 x 40mm(for screws in setups VOKI, Proslot X12, e.t.c) - #26705
Precision Torx Screwdriver T5 x 40mm
Rotating cap for precise turning and control with fingertip
Precision handle - high quality plastic, cadmium free
Molded on tapered handle allows rapid rotation
High performance blade - CVM steel, hard chrome finished
Tip - precision ground for exact fit, hard chromed non-slip surface
Blade Length: 40mm (1.6") -
CAHOZA T SHIRT XL - #310XL
100% pure cotton, available in black or purple, available in XL or XXL, always specify color and size when ordering
-
CAHOZA T SHIRT XXL - #310XXL
100% pure cotton, available in black or purple, available in XL or XXL, always specify color and size when ordering
-
ALPHA T-SHIRT,SIZE-L - #900L
ALPHA T-SHIRT,SIZE-L - #900L
-
KOLHOZA Wheel storage plastic box Ø27 mm, 167 х 122 х 59 mm, 12 tubes includes - #KZA041-27
KOLHOZA Wheel storage plastic box Ø27 mm, 167 х 122 х 59 mm, 12 tubes includes
Convenient box for storing ready to race wheels! A secure lock prevents accidental opening. The set includes 12 very convenient tubes with a tight screw cap
-
KOLHOZA Slot car box "Sportsman working place" - #KZA042
KOLHOZA Slot car box "Sportsman working place"
Width - 455 (+/- 10-20 mm)
Height - 330 (+/- 10 - 20 mm)
Depth - 190 (+/- 10-20 mm)Height on the stands: 380 mm, on the wheels: 455 mm
-
WELLER Holder soldering iron - #T8000
WELLER Holder soldering iron - #T8000
- Easily attaches to work surface area
- Holds generic soldering tools
-
PARMA PAINTS FOR LEXAN
The best paints for polycorbinate. Due to the water base, lexan is not affected by the strength. Excellent keep on the body when striking.
The price is indicated per tube of 60 ml.
http://parmapse.shptron.com/c/faskolor-paint-shop
-
SLICK7 CLEANER-CONDITIONER FOR COMMUTATOR VOODO COMM BRAID DROPS - SL404
VOODOO COMM DROPS AND BRAID ANTI-BURN TREATMENT
-
PJ RACEWAY BIG RED Tire Cleaner & Conditioner, 1 OZ - #PJ-4002
PJ RACEWAY BIG RED Tire Cleaner & Conditioner, 1 OZ - #PJ-4002
-
SLICK7 GLIDEX II OILITES AND BALLBEARINGS OIL -#S7-426
SLICK7 OILITES AND BALLBEARINGS OIL
GLIDEX II Synthetic lubricant for bushings and ball bearings. A must for SL7 bushings.
-
SLICK7 Glidex synth lubricant - #SL7405
SL7405 - GLIDEX SYNTHETIC AEROSPACE LUBRICANT (MIL-SPEC). Ultra -HighFilmstrength , Bonding, low viscosity oil for ball bearing.
-
KOFORD PREMIUM BALLBEARING OIL - #M327
Premium BB oil.
Ultra high temp. synthetic oil with special antiwear and corrosion inhibitor additives. Oil formulation is selected to have the least detrimental effect iif excess gets on brushes. Treat your bearings to the best
-
KOFORD Mobile 1 racing oil - #M750
KOFORD Mobile 1 racing oil - #M750
Hi performance for ball bearings or oilites
-
LOCTITE SHAFT-BUSHING RETAINER LOCTITE 648 for fixing ballbearings into the chassis holes, 5 ml
Ballbearing retainer in rear bridge
-
3M Tire glue, tube 147 ml.
3M Tire glue, tube 147 ml.
The best tire glue! Used by the world wide professional, including wing-classes, where rims are often perforated and, along with large loads, have a smaller adhesive area.
-
ZHB Spray unit per bottle for the tire traction
Spray unit per bottle for the tire traction
-
KOFORD ISRA TECH TOOL - M674
ISRA tech tool - EDM cut and anodized
-
KOLHOZA Slot car box "Sportsman working place" - #KZA043
KOLHOZA Slot car box "Sportsman working place"
Width - 420 (+/- 10-20 mm) - 16.53" (+/- .39"- .78")
Height - 330 (+/- 10 - 20 mm) - 12.99" (+/- .39"- .78")
Depth - 200 (+/- 10-20 mm) - 7.87" (+/- .39"- .78") -
SLICK7 SILVER SHUNT WIRE, HANK, Silver weaving - #SL7219
SILVER PLATED SHUNT WIRE
Silver weaving
-
TQ SILVER SHUNT WIRE, 3 meters, Silver weaving - #TQ300
3 meters (10') silver plated copper shunt. The original 22 Gauge 3×50 «TIGHT WIND» construction is back!
Silver weaving
-
ZHB AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
-
ZHB Ballbearing 1/8" х 1/4" х 7/64" (3.15 x 6.35 x 2.78 mm), shielded, 7 balls, pair - #1/8х1/4
Ballbearing 1/8" х 1/4" х 7/64" (3.15 x 6.35 x 2.78 mm), shielded, 7 balls, pair
-
PROSLOT X7 PRO motor brushes (EURO motor sizes), 1 pr. - #PS-X7EURO
PROSLOT X7 PRO motor brushes (EURO motor sizes), 1 pr. - #PS-X7EURO
1 pair of Euro motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
PROSLOT X7 PRO motor brushes (EURO motor sizes), 6 pr. - #PS-X7EURO
PROSLOT X7 PRO motor brushes (EURO motor sizes), 6 pr. - #PS-X7EURO
6 pairs of Euro motor brushes. These new motor brushes have been thoroughly tested, race proven, and showing terrific results. This motor brush has the same performance as their PS-G7, but with longer wearing characteristics.
-
KOFORD S.B.F. II Horizontal motor brushes, pair - #M486
Traditional brushes for motor, they have a little more density, compared to brushes PROSLOR - #PS-901 accordingly more are erased, but the collector wears out more.
In ISRA classes motors it is customary to establish BIGFOOT brush on "+" and a brush manufactured by PROSLOT on "-". Thus, it is possible to achieve the most uniform wear of the brushes. Regardless of this, as practice shows, the plus brush should be changed 2 times more often.
-
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
KOFORD S.B.F. II premium horizontal brushes, 1 cd. ( 6 pr.) - #M485
S.B.F. II Horizontal brushes for 16D, Super 16D, Competitor, etc. The Worlds best motor brush, winner of countless World and National championships. These are the brushes which our M476 and M244 brushes are machined from.
-
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
KOFORD Premium horizontal SBF II brushes (for C12, G27) w/precision ground shunt slot, 1 cd. (6 pr.) - #M476
Now shortened and ready to use. Use with M313 light tension or M276 heavy tension springs and M329 or M295 heat transfer compound.
-
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, pair - #M244A
Hard premium brushes for vertical brush hoods, open and group classes
Prepared for installation in vertical brush hoods brushes.
-
KOFORD HARD PREMIUM BRUSHES BIGFOOT, VERTICAL, 6 pairs - #M244A
Hard premium brushes for vertical brush hoods, open and group classes
6 pairs prepared for installation in vertical brush hoods brushes packed in easy opened box.
-
MID AMERICA C-Can medium 5 coil motor springs, 1 pair - #MID640
MID AMERICA C-Can medium 5 coil motor springs, 1 pair - #MID640
-
CAHOZA 5 COIL SPRINGS, pair - #CAH160
5 COIL SPRINGS
Cahoza springs for Scale motors and G27 motors, made from hardened steel coated with white shiny zinc, withstands 800F, high quality and accuracy -
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 40 DEG - #468-BOX-40
Tri-Star G12 arm .518 diameter 40° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 42 DEG - #468-BOX-42
Tri-Star G12 arm .518 diameter 42° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 44 DEG - #468-BOX-44
Tri-Star G12 arm .518 diameter 44° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 45 DEG - #468-BOX-45
Tri-Star G12 arm .518 diameter 45° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 46 DEG - #468-BOX-46
Tri-Star G12 arm .518 diameter 46° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 47 DEG - #468-BOX-47
Tri-Star G12 arm .518 diameter 47° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD TRI-STAR DIA .518" BOX X-12 ARM 48 DEG - #468-BOX-48
Tri-Star G12 arm .518 diameter 48° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 45 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
KOFORD Tri-Star dia. .518" Handwound X-12 ARM 48 deg. - #M468-H12
Hand wound on the Koford Tri Star blank for the ultimate in performance. Features reduced winding resistance and weight. Super hard shaft for long armature life.
-
CAHOZA TORNADO 5 (C-CANS) BEVELLED MAGNETS, pair - #278
NEW CAHOZA TORNADO 5 BEVELLED MAGNETS
the same as #277 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA -
KOFORD Neo top gun C-Can drag magnets - #M596
KOFORD Neo top gun C-Can drag magnets - #M596
-
CAHOZA C-Can G12 motor - U - #231
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19,1 grammes.
-
CAHOZA C-Can G12 motor - U - bevelled - #231B
Cahoza C-can motor, assembled using:
- "U" type C-can #251,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18,1 grammes.
-
CAHOZA C-Can G12 motor - UL - #232
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 magnets,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 19 grammes.
-
CAHOZA C-Can G12 motor - UL - bevelled - #232B
Cahoza C-can motor, assembled using:
- "UL" type C-can #252,
- Cahoza Tornado 2 bevelled magnets #276,
- Cahoza plastic endbell,
- Cahoza hardware #266,
- Cahoza aluminium spring cups,
- Cahoza tapping screws,
- Koford flanged oilites,
- Koford armature M468 -- Box TriStar G12 dia .518", perfectly balanced with shortened axle and cut down commudator,
- Koford brushes M486,
- Cahoza springs #257,
- magnets are glued in using Cahoza single component epoxy,
- inside diameter of magnets is 13,45mm (.529"),
- weight of complete motor is only 18 grammes.
-
CAHOZA G12 Motor type O - #235-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #235-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilites,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type O - #236-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U - #236-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type UL - #236-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- best Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA G12 Motor type UL - bevelled - #236-ULB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza endbell #262,
- Cahoza spring cups,
- 2x5 precisely turned oilite in endbell, ball bearing in can,
- Koford brushes,
- 3 coil springs,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled,
- weight 18.9 grammes
-
CAHOZA G12 Motor type O -- GOLD - #237-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,2 grammes
-
CAHOZA G12 Motor type U -- GOLD - #237-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19,1 grammes
-
CAHOZA G12 Motor type UL -- GOLD - #237-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #263,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA G12 Motor type UL -- BLUEPRINTED- #237-ULB
Cahoza C-can motor, assembled using:
- Cahoza UL C-can #252,
- Cahoza Tornado 5 beveled magnets,
- Cahoza #263 plastic endbell with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.9 grammes
-
CAHOZA PROFI G12 Motor type O - #238-O
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 magnets,
- Cahoza aluminium endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 19 grammes
-
CAHOZA PROFI G12 Motor type O - bevelled - #238-OB
Cahoza C-can motor, assembled using:
- new Cahoza C-can #250,
- Cahoza Tornado 5 beveled magnets,
- Cahoza aluminium endbell #146 with gold plated hardware,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18.8 grammes
-
CAHOZA PROFI G12 Motor type U - #238-U
Cahoza C-can motor, assembled using:
- new Cahoza C-can #251,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,9 grammes
-
CAHOZA PROFI G12 Motor type UL - #238-UL
Cahoza C-can motor, assembled using:
- new Cahoza C-can #252,
- Cahoza Tornado 5 magnets,
- Cahoza endbell #146,
- Cahoza spring cups,
- ball bearings both in can and endbell,
- best Koford brushes,
- 3 coil teflon insulated springs,
- silver shunt wire,
- Koford X12 .518" armature,
- Cahoza screws,
- professionaly assembled, absolutely the most precise and the fastest among all motors,
- weight 18,8 grammes
-
CAHOZA ALUMINUM SPRING CUPS (C-CANS), pair - #270
ALUMINIUM SPRING CUPS diameter for springs is 3,55mm (.180"), length is 2mm, springs are perfectly fastened and don't loose at all
-
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
DUBICK Axle ballbearing 1/8" x 1/4" (3.15 mm x 6.35 mm), sheilded, flanged, pair - #DE719
-
CAHOZA POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE, Ø14,9 mm - #1
POLYMER GEARS 80 PITCH ELITE
polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 44, 45 teeth -
YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM
YRE Pinion 80 pitch 7 teeth, 0° angle 1.5 mm bore, EDM
Manufactured on the Japan EDM machine AMADA. High quality swiss steel.
-
PROSLOT SpeedFX matched magnets for D-cans (16D) - #PS2016
SPEEDFX MATCHED MAGNETS FOR D-CANS (16D) (1 pr.)
-
KAMEN DEMON 16D MAGNETS - #CMNK550
Magnets for D-Cans
-
PARMA Super 16D Motor Replacement Endbell - #502E
Replacement Endbell for #502 Super 16D Motor. Includes hardware and springs.
-
PARMA ENDBELL HARDWARE - #500B
16D Motor Endbell Hardware set
-
PROSLOT ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods - #2009
SET OF ENDBELL FOR PROSLOT MOTORS 16D, w/brush hoods
-
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
PROSLOT SpeedFX Brush hood & heatsink set - #PS-2010
-
KAMEN DEMON 16D MAGNETS - #CMNK550
Magnets for D-Cans
-
PROSLOT TORX 5 SCREW FOR ENDBELLS & BRUSH HOODS, 1 pc. - #PS717
1 self starting T5 Torx can and endbell screws
-
PROSLOT S16D BALANCED ARMATURE (commutator trued) - #PS 2007
Basic armature for PROSLOT SPEED FX motor.
-
PROSLOT S16D ARMATURE, BALANCED, DIA. .513" - #PS 700
Special order!
Write to us to select the angle of the armature!
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 38 DEGREE - #PS-700C-38
Super 16 C Arm .513, 38 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 42 DEGREE - #PS-700C-42
Super 16 C Arm .513, 42 degrees, balanced
-
PROSLOT S16C REPLACEMENT ARMATURE, BALANCED, DIA. .513", 45DEGREE - #PS-700C-45
Special order!
Super 16 C Arm .513, 45degrees, balanced
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 38 DEGREE - #PS-700C-KS38
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PROSLOT KS16C REPLACEMENT ARMATURE, BALANCED, 45 DEGREE - #PS-700C-KS45
Special order!
Write to us to select the angle of the armature or ask, which angle is available in stock!
-
PARMA 16D ROTOR MOTOR ENDBELL SCREWS - #498F
16D Rotor Motor endbell Screws - set of 4
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "HK" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD SELF TAP MOTOR SCREWS, 4 pcs. - #M466-4
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD SELF TAP MOTOR SCREWS, 24 pcs. - #M466
Self tapping Box Stock can & endbell screws. 1/8" long for minimum weight and to provide can screw clearance on Feather set ups. Tighten with standard wheel wrench. 24 psc.
Suitable for everyone plastic endbells, besides endbells CAHOZA
-
KOFORD REPLACEMENT ARMATURE FOR JK HAWK - #M644
Koford replacement arm for JK Hawk. Plated better then drill blank shaft, 800° epoxy. Requires JK replacement endbell for Koford arms.
-
PROSLOT HAWK REPLACEMENT ARMATURE W/MARKED "RUS" - #4016
HAWK REPLACEMENT ARMATURE W/MARKED RUS
Only HAWK motor with special armature (marked RUS) may be used in Production 1/32 by russian rules
-
KOFORD G12 Armature for Hawk6 Neo Magnet Setup Only 40 Degrees - #M645-12-40
G12 arm to fit JK Hawk 6 bonded neo magnet set up. Better then drill blank shaft, 800° epoxy. 40° timing. recommended for neo magnet set ups only.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 1 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
TQ 16D CAN SCREWS, SELF-TAPPING, FOR ALLEN KEY, 4 pc. - #TQ16
These are custom made of heat treated steel with .050” button heads so your gear wrench will work. The 1/8” self tapping, oversized threads will fix factory stripped endbells. If you race 16D’s, these are the only screws to use. Now chrome plated for corrosion resistance and appearance.
-
KOFORD ENBELL FOR SETUP KOFORD M652 UNDER ARMATURE W/RING - #M287L
ENBELL FOR SETUP KOFORD #M652 UNDER ARMATURE W/RING - #M287L
-
CAHOZA Setup kit - G27 Light .630" - #82
CAHOZA Setup kit - G27 Light .630" - #82
This kit contains can #80, single endbell #128 or #128-4, pair of gold plated horizontal hardware #171, pair of 5 coil anodized spring cups #157 and 4 pieces of phenolic insulators #159
-
MOTOR HORKY (under order), assembly
Motors supplied under order. Delivery time from 1 month to 1 year. Also, price can change depending on the terms of delivery.
-
ZHB PRODUCTION 1/24 MODEL KIT IN THE MINIMUM CONFIGURATION
This is a kit of the production model 1/24 in the simplest configuration: Champion chassis, 64 pitch, clips, Lexan body, Proslot X12 motor with a cheap armature (PS3000 motor, good for a beginner, costs only $ 33, then in this setup it will be possible to install any other armature.).
-
ZHB PRODUCTION 1/24 MODEL KIT IN THE MAXIMUM CONFIGURATION
This is a kit of the production model 1/24 in the maximum configuration: the JK two-piece chassis, 72 pitch, motor: setup + matched magnets of the 12th group + KOFORD armature + ballbearings + multi-coil springs + washers, tubing instead of clips, lexan body.
-
CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A
PARAMETERS
- Magnets quantity: 20 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103
PARAMETERS
- Magnets quantity: 24 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A
PARAMETERS
- 24 segmented magnets – bevelled 15°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
MID AMERICA Clear Body 1/24 4" Cab Over Race Truck, Lexan .007" (0.175 mm), with paint mask - #MID1010
MID AMERICA Clear Body 1/24 4" Cab Over Race Truck
- Made from: Polycarbonate (Lexan)
- For: 1/24 scale
- Thickness: .007" (0.175 mm)
- Clear body with paint mask
-
MainRef race manager. The most modern software for competition and training. It works with all modern Windows operating systems. Switching wires included. Fits to same connectors as SPYTECH (Fully interchangeable - compatible interface)
Was used on ISRA 2022 in Latvia.
More info will add later.
PLease, ask if you have any questions.
-
KOLHOZA Body Formula 1/32 Kolhoza Mercedes W07 Hybrid (#0114LT) painted in livery F1 team Stewart SF3 1999, 1 pc. - KZA#2027
KOLHOZA Body Formula 1/32 Kolhoza Mercedes W07 Hybrid (#0114LT) painted in livery F1 team Stewart SF3 1999, 1 pc.
- ISRA 2017-2019 "Mercedes W07 Hybrid"
- Made from LEXAN thickness .005"
- Really light body without any stickers, only painting
-
RED FOX Production 1/24 Audi RS5 DTM body (ISRA 2019), lexan, thickness .005" (0.125 mm), w/paint masks - #RFAUDIPROD19-05
PRODUCTION 1/24 Audi RS5 DTM BODY LEGAL FOR ISRA 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .005" (0.125 mm)
- w/paint masks
-
RED FOX Production 1/24 Audi RS5 DTM body (ISRA 2019), lexan, thickness .007" (0.175 mm) - #RFAUDIPROD19-07
PRODUCTION 1/24 Audi RS5 DTM BODY LEGAL FOR ISRA 2019
- Made from: Polycarbonate (Lexan)
- For: Production 1/24
- Thickness: .007" (0.175 mm)
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan EJ12 2002, 1 pc. - KZA#2037
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team Jordan EJ12 2002, 1 pc. - KZA#2037
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
DUBICK Engineering 2024 ES 1/24 Eurosport chassis assembled without ballbearings - #DBES24
All chassis starting from 2016 will be made of German high-carbon structural steel 1 mm thick. This is the same material that is used the world's leading chassis manufacturers.
-
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MP4, 1 pc. - KZA#2038
KOLHOZA Body Formula 1/32 REDFOX Ferrari F1 HALO (#RFF1ISRA23) painted in livery F1 team McLaren MP4, 1 pc. - KZA#2038
- Made from: Polycarbonate (Lexan)
- For: Formula 1/32
- Thickness: .005" (0.125 mm)
- Custom painted body
-
JK Custom Painted Body 4" Lola B12 LMP Martini 0.010" - #B114BU7
JKP Custom Painted Body 4" Lola B12 LMP Martini 0.010"
-
RED FOX Clear Production 1/32 Toyota GT body, Lexan thin .007” (0.175 mm) - #RFSC51C
Clear Production 1/32 Toyota GT body
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body.
-
RED FOX Clear Production 1/32 Fast BS HD body (includes interrior), Lexan thin .007” (0.175 mm) - #RFSC52C
Clear Production 1/32 Fast BS HD body (includes interrior)
- Made from: Polycarbonate (Lexan);
- For: Production 1/32;
- Thickness: .007" (0,175 mm);
- Clear body, includes interrior.
- Clear body, includes interrior.
-
KOLHOZA 1/32 Car interrior clear, thickness .005" (0.125 mm) - #0122
KOLHOZA 1/32 Car interrior
- clear,
- thickness .005" (0.125 mm).
-
BPA 1/32 Car interior clear, Lexan - #P 001
BPA 1/32 Car interior
- Made from: Polycarbonate (Lexan);
- For: 1/32 scale;
- Clear.
-
BPA 1/24 Car interior clear, Lexan - #P 011
BPA 1/24 Car interior
- Made from: Polycarbonate (Lexan);
- For: 1/24 scale;
- Clear.
-
NeAn Clear G7 LOLA 2007 BODY, Lexan, thickness .005" (0.125 mm) - #158-LT
Clear G7 LOLA 2007 BODY
- Made from: Polycarbonate (Lexan)
- For: G7
- Thickness: .005" (0.125 mm)
- Length: 5.921" (150.4 mm)
- Width: 3.15" (80 mm)
- Clear body
-
NeAn Clear G7 LOLA 2007 BODY, Lexan, thickness .007" (0.175 mm) - #158-L
G7 LOLA 2007 BODY
- Made from: Polycarbonate (Lexan)
- For: G7
- Thickness: .007" (0.175 mm)
- Length: 5.921" (150.4 mm)
- Width: 3.15" (80 mm)
- Clear body
-
NeAn Clear G7 LOLA 2007 BODY, PVC, thickness .015" (0.4 mm) - #158P
G7 LOLA 2007 BODY
- Made from: Polyvinyl chloride (PVC)
- For: G7
- Thickness: .015" (0.4 mm)
- Length: 5.921" (150.4 mm)
- Width: 3.15" (80 mm)
- Clear body
-
REDFOX Clear body Wing-style, Corvette hype wing car, lexan, thickness .005" (0.125 mm) - #RFST19C5R
Clear body Wing-style, Corvette hype wing car
- Made from: Polycarbonate (Lexan)
- For: Wing-style
- Thickness: .005" (0.125 mm)
- Clear body.
-
REDFOX Clear body Wing-style, Shadow wing w/rib, lexan, thickness .005" (0.125 mm) - #RFST18C5R
Clear body Wing-style, Shadow wing w/rib
- Made from: Polycarbonate (Lexan)
- For: Wing-style
- Thickness: .005" (0.125 mm)
- Clear body.
-
REDFOX Clear body Wing-style, Foxtail wing body w/rib, lexan, thickness .005" (0.125 mm) - #RFST17C5R
Clear body Wing-style, Foxtail wing body w/rib
- Made from: Polycarbonate (Lexan)
- For: Wing-style
- Thickness: .005" (0.125 mm)
- Clear body.
-
PARMA LARGE POLYCARBONATE SHEET, thick. .030" (0,76 mm), dim.: 292 x 330 mm, sheet - #10416
Looking to build a custom wing or body part? Our .030" clear polycarbonate sheet is 11 1/2" x 13" and has many uses for custom building.
-
PARMA LARGE POLYCARBONATE SHEET, thick. .040" (1,02 mm), dim.: 292 x 330 mm, sheet - #10417
Looking to build a custom wing or body part? Our .040" clear polycarbonate sheet is 11 1/2" x 13" and has many uses for custom building.
-
MID AMERICA Model wheels 3/32" axle, .720" (18.3 mm) dia., on magnesium rims, full hub, FISH medium, pair - #MID20F
MID AMERICA Model wheels, pair - #MID20F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .720" (18.3 mm)
- Rims material: magnesium
- Tire: FISH
- For classes scale: 1/32
-
PRO-TRACK Model wheels NATURAL EUROPEAN RUBBER 3/32" axle, .725" (18.4 mm) dia., .800" (20.32 mm) width, small hub, magnesium rims - #PTM286
PRO-TRACK Model wheels NATURAL EUROPEAN RUBBER 3/32" axle, .725" (18.4 mm) dia., .800" (20.32 mm) width, small hub, magnesium rims - #PTM286
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Dia.: .725" (18.4 mm)
- Width: 800" (20.32 mm)
- Rims material: magnesium
- Tire: NATURAL EUROPEAN RUBBER
- For classes scale: 1/24
-
JK MODEL WHEELS 3/32" AXLE, 15.3MM WIDTH, ON PLASTIC RIMS, for F1/32, pair - #T201N
JK MODEL WHEELS 3/32" AXLE, 15.3MM WIDTH, ON PLASTIC RIMS, for F1/32, pair - #T201N
0.720"D 0.400"H 0.600"W 3/32"A Natural 1/32
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- For classes: F1/32
Old catalog #JK8721SP
-
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø10.5 mm, with offset hub for ES32, pair - #T205N
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø10.5 mm, with offset hub for ES32, pair - #T205N
1/32 Scale Reverse Hub Small Rim Tires on Plastic Hub.
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- Rims dia., mm: 10,5
- For classes: ES32
- *with offset hub
Old catalog #JK8733SP
-
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø12 mm, with offset hub for ES32, pair - #T203N
JK Model wheels 3/32" axle, 15.3 mm width, on plastic rims Ø12 mm, with offset hub for ES32, pair - #T203N
1/32 Scale Reverse Hub Small Rim Tires on Plastic Hub.
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 15,3
- Rims material: plastic
- Rims dia., mm: 12
- For classes: ES32
- *with offset hub
Old catalog #JK8733P
-
JK Model wheels 3/32" axle, 20 mm width, on plastic rims, pair - #T3S3N
JK Model wheels 3/32" axle, 20 mm width, on plastic rims, pair - #T3S3N
PARAMETERS
- Axle, mm: 2,36
- Width, mm: 20
- Rims material: plastic
- For classes scale: 1/24
Old catalog #JK8700PP
-
ZHB Making a metric thread M5 on the guide - #111
ZHB Making a metric thread M5 on the guide - #111
This is a thread for guide nuts Cahoza
-
ZHB Making a imperial thread 10-32 on the guide - #112
ZHB Making a imperial thread 0-80 on the guide - #112
This is a thread for guide nuts JK & Koford
-
JK Rear wheel tires D4 0.375"ID x 0.850"OD Natural Donut, pair - #DS/L
JK Rear wheel tires D4 "natural donut", pair - #DS/L
PARAMETERS
- Inside dia., mm: 9,5
- Outside dia., mm: 21,5
- Made for rims, dia., mm: 10
These tires can use in all classes
Old catalog #JKP-D4
-
JK Natural rubber donuts (JKP-D5) inside Ø10,8 mm (.425"), outside Ø24,76 mm (.975"), pair - #DML/LB
JK Natural rubber donuts (JKP-D5)
PARAMETERS
- Inside dia.: 10,8 mm (.425")
- Outside dia.: 24,76 mm (.975").
Old catalog #JKP-D5
-
SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair - #SF70100
SLOT FOX Drag racing donuts, inside Ø 15,24 mm (.600"), outside Ø 34,34 mm (1.352"), about 17,78 mm (.700") width, pair
1 Pair Slot Fox Natural Rubber Donuts for Drag Racing, Replace worn out drag tires and keep your expensive hubs without replacement cost.
-
B52 PINK PRIMO donuts. inside Ø 9 mm, outside Ø21 mm, about 25,5 mm width, pair
B52 PINK PRIMO donuts. inside Ø 9 mm, outside Ø21 mm, about 25,5 mm width, pair
Premium quality donuts
-
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, w/out hub for press-on 3/32" axle, (Ø21 mm)
This gear is made for pressing on the axle!
You can pressed-on more thick axle, if you deploy the fitment hole
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø11 mm, w/offset of the hub - #BSV16112of
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 11 mm;
- W/offset of the hub for ES 1/32 & Production 1/32.
-
BSV Plastic rims for 2 mm axle, width 20 mm, Ø11 mm - #BSV20112
BSV Plastic rims
- For 2 mm axle;
- Width 20 mm;
- Dia. 11 mm.
-
YRE Aluminium D16T rims for 3/32" axle, width 16 mm, Ø12 mm
YRE Aluminium D16T alloy rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 12 mm;
- Weight pair 1.9 g;
- Aluminium D16T alloy. Manufactured on the precision lathe. Holes milled up to 3/32". With offset of the hub, lightweight. Stiffener on the outer end.
-
JK Plastic rims for 3/32" axle, width 20 mm, Ø.510" (12.95 mm) - #R3L
JK Plastic rims - #R3L
- 3/32" axle,
- width 20 mm,
- Ø.510" (12.95 mm).
-
ZHB Custom made wheels, regular donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
ZHB Custom made wheels, regular donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
-
ZHB Custom made wheels, primo donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
ZHB Custom made wheels, primo donuts, any rims, handmade, super quality, 3M tire glue, screw w/hollow
-
S&K PLASTIC RIMS FOR 2 mm axle, width 20 mm, Ø11 mm, ultra light (1,87 gr/pair) - #SK11202
S&K PLASTIC RIMS, ultra light (1,87 gr/pair) - #SK11202
PARAMETERS
- axle, mm: 2
- width, mm: 20
- dia.,mm: 11
- weight per pair, gr/pair: 1,87
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.550" (14 mm) - #MID856
MID AMERICA Carbon fiber rims - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .550" (14 mm);
-
MID AMERICA Carbon fiber rims for 3/32" axle, width .810" (20 mm), Ø.550" (14 mm), 1 cd. (6 pairs) - #MID856
MID AMERICA Carbon fiber rims, 1 cd. (6 pairs) - #MID851
- For 3/32" axle;
- width .810" (20 mm);
- Dia. .550" (14 mm);
-
BSV Plastic rims for 2 mm axle, width 16 mm, Ø15 mm - #BSV16152
BSV Plastic rims
- For 2 mm axle;
- Width 16 mm;
- Dia. 15 mm.
-
BSV Plastic rims for 3/32" axle, width 16 mm, Ø15 mm - #BSV1615
BSV Plastic rims
- For 3/32" axle;
- Width 16 mm;
- Dia. 15 mm.
-
JK Front wheels for 1/24, 0.750"D 0.530"H 0.375"W 3/32"Axle (Ø19,05 mm, rimSz 13,46 mm, width 9,525 mm, axle 2,36 mm), pair - #T113F
JK Front wheels for 1/24, pair - #T113F
PARAMETERS
- Axle: 3/32" (2,36 mm)
- Width: 0.375" (9,525 mm)
- Dia.: 0.750" (19,05 mm)
- Rims material: plastic
- For classes: FORMULA 1/24 classes, and for other model classes, such as "TEAPOT" or GM
Old catalog #JK8747PF
-
DUBICK PINION 48 PITCH, 12T, 0° angle 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-12
DUBICK PINION 48 PITCH, 12T, 0° angle 2 mm bore, BRASS
This is press-on style pinion gear
-
ARP Pinion gear 48 pitch, 12T, 2 mm bore, steel - #arp4812s
ARP Pinion gear 48 pitch, 12T, 2 mm bore, steel - #arp4812s
48 pitch Straight stainless steel 12 tooth pinion gears
-
ARP Pinion gear 48 pitch, 13T, 2 mm bore, steel - #arp4813s
ARP Pinion gear 48 pitch, 13T, 2 mm bore, steel - #arp4813s
48 pitch Straight stainless steel 13 tooth pinion gears
-
DUBICK PINION 48 PITCH, 13T, 0° angle 2 mm bore, BRASS (This is press-on style pinion gear) - #DB501-13
DUBICK PINION 48 PITCH, 13T, 0° angle 2 mm bore, BRASS
This is press-on style pinion gear
-
ARP Pinion gear 48 pitch, 8T, angled, 2 mm bore, steel - #arp4808a
ARP Pinion gear 48 pitch, 8T, angled, 2 mm bore, steel - #arp4808a
48 pitch Tru bevel stainless steel 8 tooth pinion gear
-
ARP Pinion gear 48 pitch, 9T, angled, 2 mm bore, steel - #arp4809a
ARP Pinion gear 48 pitch, 9T, angled, 2 mm bore, steel - #arp4809a
48 pitch Tru bevel stainless steel 9 tooth pinion gear
-
ARP Pinion gear 48 pitch, 10T, angled, 2 mm bore, steel - #arp4810a
ARP Pinion gear 48 pitch, 10T, angled, 2 mm bore, steel - #arp4810a
48 pitch Tru bevel stainless steel 10 tooth pinion gear
-
ARP Pinion gear 48 pitch, 11T, angled, 2 mm bore, steel - #arp4811a
ARP Pinion gear 48 pitch, 11T, angled, 2 mm bore, steel - #arp4811a
48 pitch Tru bevel stainless steel 11 tooth pinion gear
-
ARP Pinion gear 48 pitch, 12T, angled, 2 mm bore, steel - #arp4812a
ARP Pinion gear 48 pitch, 12T, angled, 2 mm bore, steel - #arp4812a
48 pitch Tru bevel stainless steel 12 tooth pinion gear
-
ARP Pinion gear 48 pitch, 13T, angled, 2 mm bore, steel - #arp4813a
ARP Pinion gear 48 pitch, 13T, angled, 2 mm bore, steel - #arp4813a
48 pitch Tru bevel stainless steel 13 tooth pinion gear
-
ARP Pinion gear 48 pitch, 14T, angled, 2 mm bore, steel - #arp4814a
ARP Pinion gear 48 pitch, 14T, angled, 2 mm bore, steel - #arp4814a
48 pitch Tru bevel stainless steel 14 tooth pinion gear
-
DUBICK PINION 48 PITCH, 14T, 0° angle, 3 mm bore, BRASS (This is press-on style pinion gear) - #DB501-14
DUBICK PINION 48 PITCH, 14T, 0° angle, 3 mm bore, BRASS
This is press-on style pinion gear
-
DUBICK PINION 48 PITCH, 15T, 0° angle, BRASS (This is press-on style pinion gear) - #DB501-15
DUBICK PINION 48 PITCH, 15T, 0° angle, BRASS (This is press-on style pinion gear) - #501-15
This is press-on style pinion gear!
-
DUBICK PINION 48 PITCH, 16T, 0° angle, BRASS (This is press-on style pinion gear) - #DB501-16
DUBICK PINION 48 PITCH, 16T, 0° angle, BRASS (This is press-on style pinion gear) - #501-16
This is press-on style pinion gear!
-
MID AMERICA 3/32" small shoulder adjustable bushing, 1 box (6 pairs) - #MID557-6
MID AMERICA 3/32" small shoulder adjustable bushing, 1 box (6 pairs) - #MID557-6
3/32 Round bushings with a small shoulder to adjust height
-
MID AMERICA 3/32" big shoulder adjustable bushing, 1 cd. ( 6 pairs) - #MID554
MID AMERICA 3/32" big shoulder adjustable bushing, 1 cd. ( 6 pairs) - #MID554
Old part number #MID174
-
MID AMERICA 3/32" big shoulder adjustable bushing, pair - #MID554
MID AMERICA 3/32" big shoulder adjustable bushing, pair - #MID554
Old part number #MID174
-
CHAMPION 1/8" X 3/16" (3.15 X 4.76 MM) AXLE BUSHINGS IN PRODUCTION CHASSIS, pair - #CHA709
1/8" X 3/16" (3.15 X 4.76 MM) AXLE BUSHINGS IN PRODUCTION CHASSIS, pair
-
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
DUBICK armature bronze spacers 4.6 mm thick, 2 pcs. - #DB4034
-
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
DUBICK 2 mm, .22" (5,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-5.5
-
ARP PINION 80 PITCH, 7T, 0° angle, 1.5 mm bore - #ARP80077
Very good alternative for HORKY pinions. One hundred percent ratio of price/quality
More smaller wear resistance, but enought soft work of gear
-
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
DUBICK 2 mm, .24" (6 mm) thick aluminium axle spacer, 1 pc. - #DB712-6
-
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
DUBICK 2 mm, .26" (6,5 mm) thick aluminium axle spacer, 1 pc. - #DB712-6.5
-
PROSLOT GEAR 48 PITCH, 26-32T, 1/8" axle, w/screw, special order - #PS-672
PROSLOT GEAR 48 PITCH, 26-32T, 1/8" axle, w/screw, special order - #PS-672
Polymer Gears 48 Pitch - The tooth shape was computer designed for less friction. Will never spin on the hub. 26T-pink, 27T-while, 28T-yellow, 29T-violet, 30T-green, 31T-blue, 32T-brown
Special order from 1pc.
-
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611S
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P611S
Old catalog #JK450011
-
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P611S-6
JK Pinion 64 pitch, 11T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P611S-6
Old catalog #JK450011
-
BSV Plastic Pinion 64 pitch, 12T, 0° ANGLE, 2 mm bore - #BSVP6412
BSV Plastic Pinion 64 pitch, 12T, 0° ANGLE, 2 mm bore - #BSVP6412
Made from plastic
-
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P612
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P612
Old catalog #JK440012
-
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P612-6
JK Pinion 64 pitch, 12T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P612-6
Old catalog #JK440012
-
SONIC PINION 64 PITCH, 12T , 0° ANGLE, 2 mm bore - #30-12
SONIC PINION 64 PITCH, 12T , 0° ANGLE, 2 mm bore - #30-12
Made from steel. Special order, from 6 pcs.
12 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision
-
ARP Pinion 64 pitch, 12T, 0° angle, 2 mm bore, stainless steel - #arp6412
ARP Pinion 64 pitch, 12T, 0° angle, 2 mm bore, stainless steel - #arp6412
64 pitch stainless steel 12 tooth pinion gear heat treated to 36-38 hardness
-
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613
-
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613-6
JK Pinion 64 pitch, 13T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613-6
-
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613S
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P613S
-
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613S-6
JK Pinion 64 pitch, 13T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P613S-6
-
SONIC Pinion 64 pitch, 13T , 0° angle, 2 mm bore - #30-13
SONIC Pinion 64 pitch, 13T , 0° angle, 2 mm bore - #30-13
13 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision
-
ARP Pinion 64 pitch, 13T, 0° angle, 2 mm bore, stainless steel - #arp6413
ARP Pinion 64 pitch, 13T, 0° angle, 2 mm bore, stainless steel - #arp6413
64 pitch stainless steel 13 tooth pinion gear heat treated to 36-38 hardness
-
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614
-
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614-6
JK Pinion 64 pitch, 14T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614-6
-
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614S
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P614S
-
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614S-6
JK Pinion 64 pitch, 14T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P614S-6
-
SONIC Pinion 64 pitch, 14T, 0° angle, 2 mm bore - #30-14
SONIC Pinion 64 pitch, 14T, 0° angle, 2 mm bore - #30-14
14 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision
-
ARP Pinion 64 pitch, 14T, 0° angle, 2 mm bore, stainless steel - #arp6414s
ARP Pinion 64 pitch, 14T, 0° angle, 2 mm bore, stainless steel - #arp6414s
64 pitch stainless steel 14 tooth pinion gear heat treated to 36-38 hardness
-
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615
-
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615-6
JK Pinion 64 pitch, 15T, 0° angle, Press-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615-6
-
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615S
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 1 pc. - #P615S
-
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615S-6
JK Pinion 64 pitch, 15T, 0° angle, Solder-On Long Lasting Stainless Steel Pinion Gear, 6 ea. - #P615S-6
-
SONIC Pinion 64 pitch, 15T, 0° angle, 2 mm bore - #30-15
SONIC Pinion 64 pitch, 15T, 0° angle, 2 mm bore - #30-15
15 tooth 64 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision
-
ARP Pinion 64 pitch, 15T, 0° angle, 2 mm bore, stainless steel - #arp6415s
ARP Pinion 64 pitch, 15T, 0° angle, 2 mm bore, stainless steel - #arp6415s
64 pitch stainless steel 15 tooth pinion gear heat treated to 36-38 hardness
-
ARP Pinion 64 pitch, 16T, 0° angle, 2 mm bore, stainless steel - #arp6416s
ARP Pinion 64 pitch, 16T, 0° angle, 2 mm bore, stainless steel - #arp6416s
64 pitch stainless steel 16 tooth pinion gear heat treated to 36-38 hardness
-
ARP PINION GEAR 64PITCH, 10T, 5° ANGLE, 2 mm bore - #ARP6410A
64 pitch stainless steel 10 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion gear 64 pitch, 11T, 5° angle, 2 mm bore - #ARP6411A
ARP Pinion gear 64 pitch, 11T, 5° angle, 2 mm bore - #ARP6411A
64 pitch stainless steel 11 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion gear 64 pitch, 12T, 5° angle, 2 mm bore - #ARP6412A
ARP Pinion gear 64 pitch, 12T, 5° angle, 2 mm bore - #ARP6412A
64 pitch stainless steel 12 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion gear 64 pitch, 13T, 5° angle, 2 mm bore - #arp6413A
ARP Pinion gear 64 pitch, 13T, 5° angle, 2 mm bore - #arp6413A
64 pitch stainless steel 13 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion gear 64 pitch, 14T, 5° angle, 2 mm bore - #arp6414a
ARP Pinion gear 64 pitch, 14T, 5° angle, 2 mm bore - #arp6414a
64 pitch stainless steel 14 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion gear 64 pitch, 15T, 14° angle, 2 mm bore - #arp6415ul
ARP Pinion gear 64 pitch, 15T, 14° angle, 2 mm bore - #arp6415ul
64 pitch stainless steel 15 tooth pinion gears with 14 degree angle heat treated to 36-38 hardness
-
ARP Pinion gear 64 pitch, 16T, 5° angle, 2 mm bore - #arp6416a
ARP Pinion gear 64 pitch, 16T, 5° angle, 2 mm bore - #arp6416a
64 pitch stainless steel 16 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
BSV Gear 64 pitch, 38T, 16° angle, 3/32" axle, Ø15.96 mm
BSV Gear 64 pitch, 38T, 16° angle, 3/32" axle, Ø15.96 mm
-
CAHOZA POLYMER GEAR 64 PITCH, 38T, 16° ANGLE, 3/32" AXLE, Ø15,71 mm - #11
POLYMER GEARS 64 PITCH ANGLED 16°
polymer gears 64 pitch, for 3/32" axle, angled 16°, selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, available in 37, 38, 39 teeth -
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
S&K GEAR 48 PITCH, 40T, 3/32" axle, (Ø21 mm)
-
CAHOZA POLYMER GEAR 64 PITCH, 39T, 16° ANGLE, 3/32" AXLE, Ø16,25 mm - #11
CAHOZA POLYMER GEAR 64 PITCH, 39T, 16° ANGLE, 3/32" AXLE, Ø16,25 mm - #11
Gears are being made on a professional CNC machine. On every single piece size and number of teeth is stated. All hubs that Cahoza uses for gear production are being manufactured on a CNC machine with preciseness of 0,002mm. This teeth design provides high durability and accuracy.
-
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm - #G639
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm - #G639
Old catalog #JK42391
-
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm, narrow - #G639N
JK Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.1 mm, narrow - #G639N
Old catalog #JK4239F
-
CAHOZA Highly durable gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.24 mm - #8
CAHOZA Gear 64 pitch, 39T, 0° angle, 3/32" axle, Ø16.24 mm - #8
Highly durable polymer gears 64 pitch, for 3/32" axle, but only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester,
-
PROSLOT Polymer Gear 64 pitch, 40T, 0° angle, 3/32" axle, Ø16.5 mm - #PS-680-40
PROSLOT Polymer Gear 64 pitch, 40T, 0° angle, 3/32" axle, Ø16.5 mm - #PS-691
All of their gears were designed with AutoCAD for less friction with an integrated hub that eliminates spinning
-
BSV Gear 64 pitch, 48T, 0° angle, 3/32" axle, Ø19.83 mm
BSV Gear 64 pitch, 48T, 0° angle, 3/32" axle, Ø19.83 mm
-
BSV Gear 64 pitch, 49T, 0° angle, 3/32" axle, Ø20.25 mm
BSV Gear 64 pitch, 49T, 0° angle, 3/32" axle, Ø20.25 mm
-
ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A
ARP Pinion 72 pitch, 9T, 5° angle, 2 mm bore - #ARP7209A
72 pitch stainless steel 9 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
KOFORD Pinion 72 pitch, 9T, 3° angle, 2 mm bore, black diamond - #M677
Pinned 9T 3° angled Black Diamond coated pinions for G7 racing. Coating reduces friction and prevents solder from flowing into teeth. Use with M636 pinion wire.
-
ARP PINION 72 PITCH, 10T, 0° angle, 2 mm bore - #ARP7210
72 pitch stainless steel 10 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A
ARP Pinion 72 pitch, 10T, 5° angle, 2 mm bore - #arp7210A
72 pitch stainless steel 10 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S
KOFORD Pinion 72 pitch, 11T, 0° angle, 2 mm bore, black diamond - #M626-11S
Black Diamond coated hardened 11 tooth straight pinion with boss. Coating reduces friction and prevents solder flowing into teeth.
-
KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11
KOFORD Pinion 72 pitch, 11T, 5° angle, 2 mm bore, black diamond - #M722-11
Black Diamond coated hardened 11 tooth 5 degree angled pinion with boss. Coating reduces friction and prevents solder flowing into teeth.
-
ARP PINION 72 PITCH, 11T, 0° angle, 2 mm bore - #ARP7211
ARP PINION 72 PITCH, 11T, 0° angle, 2 mm bore - #ARP7211
72 pitch stainless steel 11 tooth pinion gears heat treated to 36-38 hardness
The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.
-
ARP Pinion 72 pitch, 11T, 5° angle, 2 mm bore - #ARP7211A
ARP Pinion 72 pitch, 11T, 5° angle, 2 mm bore - #ARP7211A
72 pitch stainless steel 11 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212
ARP Pinion 72 pitch, 12T, 0° angle, 2 mm bore - #ARP7212
72 pitch stainless steel 12 tooth pinion gears heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A
ARP Pinion 72 pitch, 12T, 5° angle, 2 mm bore - #arp7212A
72 pitch stainless steel 12 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 13T, 0° angle, 2 mm bore - #arp7213s
ARP Pinion 72 pitch, 13T, 0° angle, 2 mm bore - #arp7213s
72 pitch stainless steel 13 tooth pinion gears heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 13T, 5° angle, 2 mm bore - #arp7213a
ARP Pinion 72 pitch, 13T, 5° angle, 2 mm bore - #arp7213a
72 pitch stainless steel 13 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 14T, 0° angle, 2 mm bore - #arp7214s
ARP Pinion 72 pitch, 14T, 0° angle, 2 mm bore - #arp7214s
72 pitch stainless steel 14 tooth pinion gears heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a
ARP Pinion 72 pitch, 14T, 5° angle, 2 mm bore - #arp7214a
72 pitch stainless steel 14 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s
ARP Pinion 72 pitch, 15T, 0° angle, 2 mm bore - #arp7215s
72 pitch stainless steel 15 tooth pinion gears heat treated to 36-38 hardness
-
ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a
ARP Pinion 72 pitch, 15T, 5° angle, 2 mm bore - #arp7215a
72 pitch stainless steel 15 tooth pinion gears with 5 degree angle heat treated to 36-38 hardness
-
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR
PLASTIC REAR RIMS FOR 1/24 MODELS (TEAPOT CUP, F1/24, GM), 1 PAIR - #543
PARAMETERS
- axle, mm: 2,36
- dia., mm: 14
- width, mm: 16,5
-
ARP PINION 80 PITCH, 8T, 0° angle, 1.5 mm bore - #ARP800
Very good alternative for HORKY pinions. One hundred percent ratio of price/quality
More smaller wear resistance, but enought soft work of gear
-
S&K GEAR 64 PITCH, 49T, 0° angle, 3/32" axle, Ø20.4 mm - #G64349
The long-awaited anologue of 45 teeth gear from Horky. Maximal quantity of teeth for TEAPOT models in St.Petersburg, in which definite the min. diameter of rear wheels (22 mm) and height of rear axle - 11.5 mm.
Also, this gear perfect to GM-class.
-
BSV Gear 64 pitch, 50T, 0° angle, 3/32" axle, Ø20.67 mm
BSV Gear 64 pitch, 50T, 0° angle, 3/32" axle, Ø20.67 mm
-
ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416
ATTAN GEAR 72 PITCH 44T, 16° angle, 3/32" axle - #ATT724416
-
CAHOZA GEAR 72 PITCH, 44T, 16° angle, 3/32" axle, Ø16.00 mm - #4
POLYMER GEARS 72 PITCH ANGLED 16°
polymer gears 72 pitch, for 3/32" axle, 42, 43, 44 teeth angled by 16°, especially shaped teeth works perfectly with any pinion, tested on US NATS in 2002 and won in nearly all categories -
JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D
JK Gear 72 pitch 44T, 15° angle, 3/32" axle, Ø16.00 mm, w/screw - #G744D
Old catalog #JK724415
-
ATTAN POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE - #ATT8045
ATTAN POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, 3/32" AXLE - #ATT8045
-
JK 80 PITCH 44T, 0° angle, 3/32" axle, Ø14.6mm glued on 3/32" axle ProSlot - ZHB#215
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
S&K 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#216
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
JK 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#217
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
ZHB GEAR HORKY 80 PITCH 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#218
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $2.5 (ZHB#109)
-
PARMA ALLEN HEAD MOTOR SCREW, Ø2.3 mm, 1 pc. - #484
Allen Head Screws for mounting motor to chassis
-
CAHOZA Polymer gear 80 PITCH, 45T, 0° angle, HIGHLY DURABLE, 3/32" axle, Ø14,80 mm - #1-B
CAHOZA Polymer gear 80 PITCH, 45T, 0° angle, HIGHLY DURABLE, 3/32" axle, Ø14,80 mm
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester.
-
CAHOZA POLYMER GEAR 80 PITCH, 45T, 0° ANGLE, BIG HUB, 3/32" AXLE, Ø14,9 mm, harder - #1-B
HIGHLY DURABLE GEARS 80 PITCH
new highly durable polymer gears 80 pitch, for 3/32" axle, only selected ones, high quality and accuracy, for demanding racers, tested on our roll tester, crash resistant, available in 45 teeth -
HORKY BIG HUB 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle ProSlot - ZHB#219
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
DUBICK JK style body mounting clips, pair - #DB601
DUBICK JK style body mounting clips, pair - #DB601
Body mounting clip - same size as JK 9008
-
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
DUBICK 2 mm, .28" (7 mm) thick aluminium axle spacer, 1 pc. - #DB712-7
-
JK Silver plated copper guide clips, pair - #U60
JK Pro Silver Plated Copper Guide Clips (pr)
-
JK silver plated copper guide clips, long, pair - #U28
JK silver plated copper guide clips, long, pair - #U28
-
JK silver plated copper guide clips, long, 1 cd. (10 pairs) - #U28-10
JK silver plated copper guide clips, long, 1 cd. (10 pairs) - #U28-10
-
SCB High quality braids SUPER DOWN (sizes: 3,8 x 0,35 mm х 26 mm), tin plated, 5 pairs - #SDSN01095
SCB High quality braids SUPER DOWN, tin plated, 5 pairs - #SDSN01095
sizes: 3,8 x 0,35 mm х 26 mm (.150" x .014" x 1.024")
Made in Germany!
-
SCB High quality braids SUPER SMALL (sizes: 2,8 x 0,35 mm х 26 mm), tin plated, 5 pairs - #SSSN01075
SCB High quality braids SUPER SMALL, tin plated, 5 pairs - #SSSN01075
sizes: 2,8 x 0,35 mm х 26 mm (.110" x .014" x 1.024")
Made in Germany!
-
REDFOX Premium long high performance guide flag, unthreaded, cut down, low profile, colors, 1 cd. (6 pcs.) - #RFBAGP
REDFOX Premium long high performance guide flag, unthreaded, cut down, low profile, colors, 1 cd. (6 pcs.) - #RFBAGP
RFBAGP - PREMIUM LONG GUIDE FLAG
-
RED FOX Premium long high performance guide flag, graphite, unthreaded, cut down, low profile, weighted by brass (2.18 g. total)
RED FOX Premium long high performance guide flag, graphite, unthreaded, cut down, low profile, weighted by brass (2.18 g. total)
-
RED FOX Premium long high performance guide flag, unthreaded, cut down, low profile, colors, weighted by brass (2.21 g. total)
RED FOX Premium long high performance guide flag, unthreaded, cut down, low profile, colors, weighted by brass (2.21 g. total)
-
ZHB GEAR JK 80 PITCH, 45T, 0° angle, 2mm axle, Ø14.9 mm glued on 2 mm axle KOFORD - ZHB#209
The hub is not cut width, but machined to a diameter 3 mm.
This gear for ES32 if you use offset rims in gears side or for ES24.
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
SCB High quaility braids GOOD CONTACT (sizes: 5,0 x 0,65 mm х 30 mm), silver plated, 5 pair - #GCAG01205
SCB High quaility braids GOOD CONTACT, silver-plated, (made in Germany) (NEW!)
- Sizes: 4,5 mm x 0,5 mm x 28 mm,
- 5 pair.
Good braids for all classes.
-
SCB braids SUPER THIN (sizes: 4,5 mm x 0,5 mm x 28 mm), silver plated, 5 pair - #STAG01150
SCB braids SUPER THIN, silver plated, (made in Germany)
- Sizes: 4,5 mm x 0,5 mm x 28 mm,
- 5 pair.
-
SCB High quaility braids HIGHT SPEED (sizes: 4,9 x 0,65 х 30 mm), silver plated, 5 pair - #HSAG01205
SCB High quality braids HIGHT SPEED, silver-plated, (made in Germany) (NEW!)
- Sizes: 4,9 x 0,65 х 30 mm,
- 5 pair.
Good braids for all classes.
-
SCB High quaility braids STANDARD (sizes: 4,6 x 0,6 х 30 mm), silver plated, 5 pair - #STAG01200
SCB High quality braids STANDARD, silver-plated, (made in Germany) (NEW!)
- Sizes: 4,6 x 0,6 х 30 mm,
- 5 pair.
Good braids for all classes.
-
SCB High quality braids LOW SCUFF (sizes: 3,0 x 0,35 mm х 26 mm), nickel plated, 5 pairs - #LSNI01075
SCB High quality braids LOW SCUFF, nickel plated, 5 pairs - #LSNI01075
sizes: 3,0 mm x 0,35 mm х 26 mm (.118' x .014" x 1.023")
Made in Germany!
-
MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058
MOSSETTI Chassis damping rubber strips (20 pcs.) with "3M" adhesive backing tape - #MR-1058
Flexible rubber - 0,5 mm (.020") thick
-
KOFORD .010" (0.254 MM) PHOS BRONZE GUIDE WASHER, 6 pcs. - #M321
.010 thick Phosphorous Bronze guide washer. Use to adjust guide height Will not deflect like stacked Teflon® washers. Packaged 6 per bag.
-
MID AMERICA .01" (0.25 mm) Stainless steel guide spacers, 8 pcs. - #MID148S
MID AMERICA .01" (0.25 mm) Stainless steel guide spacers, 8 pcs. - #MID148S
-
MID AMERICA .032" (0.81 mm) Teflon guide spacers, 8 pcs. - #MID150
MID AMERICA .032" (0.81 mm) Teflon guide spacers, 8 pcs. - #MID150
-
TWP Light aluminum guide nut, red - #TWPGNA-001
TWP Light aluminum guide nut, red - #TWPGNA-001
Lite weight aluminum guide nuts anodized red
-
RED FOX Gold anodized guide nut, 1 pc. - #RFALUNUT-G
RED FOX Gold anodized guide nut, 1 pc. - #RFALUNUT-G
-
RED FOX Green anodized guide nut, 1 pc. - #RFALUNUT-GR
RED FOX Green anodized guide nut, 1 pc. - #RFALUNUT-GR
-
RED FOX Purple anodized guide nut, 1 pc. - #RFALUNUT-P
RED FOX Purple anodized guide nut, 1 pc. - #RFALUNUT-P
-
RED FOX Red anodized guide nut, 1 pc. - #RFALUNUT-R
RED FOX Red anodized guide nut, 1 pc. - #RFALUNUT-R
-
RED FOX Blue anodized guide nut, 1 pc. - #RFALUNUT-B
RED FOX Blue anodized guide nut, 1 pc. - #RFALUNUT-B
-
RED FOX Black anodized guide nut, 1 pc. - #RFALUNUT-BL
RED FOX Black anodized guide nut, 1 pc. - #RFALUNUT-BL
-
KOFORD Teflon® spring insulation, 30 cm - #M267
KOFORD Teflon® spring insulation, 30 cm - #M267
Teflon® spring insulation, perfect fit on springs
-
ALPHA Teflon spring insulation, hank - #501
ALPHA Teflon spring insulation, hank - #501
The same bright red unmeltable spring insulation, but now with an even smaller outside diameter to allow that extra bit of room you need. It also slides on the spring more easily
-
RED FOX Aluminum guide nut, 1 pc. - #RFG02
RED FOX Aluminum guide nut, 1 pc. - #RFG02
High-Performance Aluminum anodized guide nuts.
-
KOFORD BRASS RETAINERS FOR .063 TUBING 1 pc. - #M536
Machined brass retainers (eyelets) for .063 tubing
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
MID AMERICA Standart profile AERO guide, red nylon, weighted, w/thread - #MID130HW
MID AMERICA Standart profile AERO guide, red nylon, weighted, w/thread - #MID130HW
-
3M DOUBLE-SIDED ADHESIVE TAPE, thickness 0.2 mm, width 6 mm, roll of 50 m - 9088
3M DOUBLE-SIDED ADHESIVE TAPE, thickness 0.2 mm, width 12 mm, roll of 50 m - 9088
-
KOFORD BRASS RETAINERS FOR .063 TUBING 24 pcs. - #M536
Machined brass retainers (eyelets) for .063 tubing 24 pieces in an easy open box
Perfect fit for attaching the front wheels to the formula 1/32! (inner dia. 1.6 mm)
-
MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059
MOSSETTI Chassis damping rubber material 2" x 3" piece w/ 3M self adhesive back - #MR-1059
-
CAHOZA 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14.9 mm glued on 3/32" axle CAHOZA - ZHB#227
The hub is machined to a diameter 3.5 mm
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
PARMA BODY MOUNTING CLIPS, 1 pair - #738
One pair of replacement body clips for flexi chassis.
-
BSV Crown gear 48 pitch 44T, 3/32" axle - #BSVF4844332
BSV Crown gear 48 pitch 44T, 3/32" axle - #BSVF4844332
-
BSV Crown gear 48 pitch 26T, 1/8" axle - #BSV0826315
BSV Crown gear 48 pitch 26T, 1/8" axle - #BSV0826315
-
BSV Crown gear 48 pitch 27T, 1/8" axle - #BSV0827315
BSV Crown gear 48 pitch 27T, 1/8" axle - #BSV0827315
-
BSV Crown gear 48 pitch 28T, 1/8" axle - #BSV0828315
BSV Crown gear 48 pitch 28T, 1/8" axle - #BSV0828315
-
BSV Crown gear 48 pitch 29T, 1/8" axle - #BSV0829315
BSV Crown gear 48 pitch 29T, 1/8" axle - #BSV0829315
-
BSV Crown gear 48 pitch 30T, 1/8" axle - #BSV0830315
BSV Crown gear 48 pitch 30T, 1/8" axle - #BSV0830315
-
BSV Crown gear 48 pitch 31T, 1/8" axle - #BSV0831315
BSV Crown gear 48 pitch 31T, 1/8" axle - #BSV0831315
-
BSV Crown gear 48 pitch 32T, 1/8" axle - #BSV0832315
BSV Crown gear 48 pitch 32T, 1/8" axle - #BSV0832315
-
BSV Crown gear 48 pitch 33T, 1/8" axle - #BSV0833315
BSV Crown gear 48 pitch 33T, 1/8" axle - #BSV0833315
-
BSV Crown gear 48 pitch 34T, 1/8" axle - #BSV0834315
BSV Crown gear 48 pitch 34T, 1/8" axle - #BSV0834315
-
BSV Crown gear 48 pitch 42T, 1/8" axle - #BSVF4842315
BSV Crown gear 48 pitch 42T, 1/8" axle - #BSVF4842315
-
BSV Crown gear 48 pitch 43T, 1/8" axle - #BSVF4843315
BSV Crown gear 48 pitch 43T, 1/8" axle - #BSVF4843315
-
BSV Crown gear 48 pitch 44T, 1/8" axle - #BSVF4844315
BSV Crown gear 48 pitch 44T, 1/8" axle - #BSVF4844315
-
PARMA Crown gear, 48 pitch 26-33 teeth,1/8" axle, with screw (special order)
Special order.
King Crown Gears feature light weight, less friction and great gear mesh for inline chassis (Womp-Womp, EDGE and HoleShot Drag Cars, Etc.) They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
PARMA Crown gear, 48 pitch 26-33 teeth,1/8" axle, includes hub adaptor 1/8" to 3/32", with screw (special order)
Special order. Includes hub adaptor from 1/8" (3.15mm) to 3/32" (2.36 mm)
King Crown Gears feature light weight, less friction and great gear mesh for inline chassis (Womp-Womp, EDGE and HoleShot Drag Cars, Etc.) They are precision molded from virgin nylon with an integrated aluminum hub. Each gear has two predrilled and tapped holes - one on each side of the hub and one 4/40 allen head set screw is included.
-
DUBICK Set #1 of 2 mm inside diameter aluminium tubes ( 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")) - #DB712
DUBICK Set of 2 mm inside diameter aluminium tubes - #DB712
In set 1 pc of each size: 5.5 mm (.22"), 6 mm (.24"), 6.5 mm (.26"), 7 mm (.28")
-
ZHB "TEAPOT" 1/24 KIT - # K035
ZHB "TEAPOT" 1/24 KIT - # K035
Kit with cut on half depth of chassis details, PROSLOT SpeedFX S16D motor, collapsible rear bridge with ballbearings, 64 pitch gears (64 pitch motor pinion, steel, 8T), KrickKr red tires, unpainted Subaru Lexan body
-
PARMA 16D Armature spacers - #500G
PARMA 16D Armature spacers - #500G
Replacement armature bushings for all 16D motors, 6 pieces.
-
JK Clip for C62 chassis, 1.5" spacing, 1 pair - #U30
JK Clip for C62 chassis, 1.5" spacing, 1 pair - #U30
Old catalog #JK90062
-
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
JK Body mounting clips 4.5 " (for 1/24 JK 4" "Cheetah X25" chassis), pair - #U44
Clip for C21, C24, C25, C26, C40, C41, C45, C55, C60, C64, C80, C81 Chassis
Old catalog #JK9008
-
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
JK Cheetah .7 F1/INDY body clips (for 1/32 "Cheetah 11" chassis), pair - #U46
Clip for C1, C5, C10, C30, C35, C93 Chassis, 2" Spacing
Old catalog #JK9010
-
PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724
PROSLOT Armature spacer kit (2 phenolic and 8 brass) - #PS-724
Armature Spacer Kit - Includes 2 phenolic and 8 brass motor spacers
-
ZHB PRODUCTION RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $59 to $185. Depending on the class and configuration.
The photos of my models are posted. New models will look more beautiful!
The average price of the model is indicated.
-
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" 1 pc - #C40
JK Motor Bracket for Production 1/24 JK 4" "Cheetah X25" - #C40B
Old catalog #JK250115
-
SLICK7 1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair - #SL7-244
1/8" X 3/16" (3.15 X 4.76 MM) BUSHINGS IN PRODUCTION CHASSIS, pair
-
PARMA 1/8" X 1/4" FLANGED OILITES,1 pair - #623А
Use for adding 1/8" diameter axle to slot car chassis with 1/4" hole. Raised Speed Ring reduces friction for increase in speed. (Requires one pair per axle.)
-
SLICK7 3/16" X 1/4" (4.76 X 6.15 MM) REDUCER BUSHING, pair - #SL7-142
REDUCER BUSHING MOUNTS 3/32 BEARINGS ON 1/8
-
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
MOSETTI Patriot "Spec" chassis 1/24 Penn/Jersey-ECFS - #MR1234
This is a spec chassis created for the ECFS Production and Penn Jersey Xfinity series. It is the MR1112 Striker Center and the MR3122 Pans
-
JK 1/32 Cheetah 11 Chassis Two-Piece Pan for PRODUCTION 1/32 - #C1
JKPHC1132 - 1/32 Cheetah 11 / 3 piece chassis design for Production 1/32. Sheet of lead in a gift! - #C1
Old catalog #HC1132
-
JK 1/32 Cheetah 11 Chassis w 1-Piece Pan, Kit, for PRODUCTION 1/32 - #C5
Special order!
JKPX321 - 1/32 CHEETAH 11 CHASSIS WITH 1 PAN, 2 piece chassis, for Production 1/32 - #C5
Old catalog #JKX321
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
JK 1/32 Cheetah 11 JK#C1 & JK#C5 Chassis Center Section - #C1C
1/32 Center Section replacement for X32 Chassis JKP 1/32 CHEETAH 11 CHASSIS for PRODUCTION 1/32 - #JKPHC1132 & JKP 1/32 CHEETAH.11 CHASSSIS KIT W/1PAN for PRODUCTION 1/32- #JKPX32
-
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
JK 1/32 Cheetah 11 JK#C1 & JK#C5 2-piece pans - #C1P
Old catalog #HC1132P
-
ZHB ISRA-CLASSES RTR MODEL (model class & configuration under special order)
My assembly. Models in the assembly will cost from $300 to $500 and more.... Depending on the configuration. Those. It can be chassis DUBICK, HORKY or CASTRICONE, And motors: setups: ZHB, VALIKO, VOKI, CAHOZA, HORKY or Machkoza, with different armatures.
Delivery of any configurations is possible !!! The average price of the model is indicated.
-
DIFALCO HD30 1/24 UPGRADE KIT - #DIF261
HD30 Upgrade PCB: Convert your 10 or 15 band Pro Plus or Fanatic controller to our new 30 band high definition design. You get the HD30 circuit board with a standard 148 ohm network board installed. Simply unsolder a few wires and remove the old PCB. Transfer the original brake and sensitivity rheostats over to the new HD30 board. Now bolt the PCB to the frame and solder a few wires to their correct positions. Simple instructions included.
-
DIFALCO TURBO BLAST BASIC. KIT - #DIF704
40 amp (70 amp surge) high power relay installs easily on main wires. Includes instructions for all controllers as well as special parts and instructions for Difalco Design "E"Motion electronic controllers and modules. Text plus drawings make our kit easier to install than other brands!
-
ZHB BRAKE RHEOSTAT 4,7 OHM
It is wound by plane nichrom. Used in controllers made by Nesterenko A.I. But, it can work with any electonic controller
-
DIFALCO ADJUSTABLE BRAKE RHEOSTAT W/KNOB - #DIF806
Brake Rheostat, pro, with knob, variable with off position, reducing washers.
-
DIFALCO PRO RHEOSTAT W/OFF POSITION - #DIF807
Same as the 806 but with no knob
-
DIFALCO POWER TRANSISTOR - #DIF830
Power Transistor, large silver transistor used on all "E"Motion electronic controllers and modules
-
DIFALCO SENSITIVITY RHEOSTAT FOR 1/24 - #DIF840
Sensitivity rheostat replacement for all Difalco controllers
-
ZHB "Banana" connector for controller, 1 pc.
"Banana" connector for controller, 1 pc.
-
KOFORD Alligator clips, 1 set - #M176
KOFORD Alligator clips, 1 set - #M176
Solid copper alligator clips
-
KOFORD Controller boots, 1 set - #M748
KOFORD Controller boots, 1 set - #M748
Red, White and Black allligator boots
-
PARMA Turbo Controller - 4 OHM - #264
PARMA Controllers have been the standard in performance since 1968. Their simplicity and durability means many years of dependable service. Resistors can be swapped easily to tailor your handling for different tracks and cars. Use for all 16D, Group 7, Group 12, Group 27 class racing. Turbo - Our most popular performance controller. Features an anodized Turbo Frame, double barrel resistor and 2 additional contact pads to ensure full brake and full power. Features clear handle, nylon trigger with oilites and 14 gauge wire, includes boots/clips.
-
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
DIFALCO Genesis 2 HD30 controller w/ economy brake & traction control - #DD280
All the features of the DD270 with our traction control rheostat added. The traction rheostat reduces the amount of power available on the upper wiper bands to reduce sliding out and deslotting on the exit of turns. Extremely useful for scale cars as well as NASCAR type racing.
-
S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm - #SK0107
S&K Adjustable Controller Chip (for S&K ELECTRONIC CONTROLLER #SK0101) 0-160 Ohm
-
S&K CONTROLLER CHIP (RESISTANCE UNDER THE ORDER)
Controller chip for S&K ELECTRONIC CONTROLLER
Contact us for choose necessary resistance
Available for order (Om):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 22 Ohm - #SK0106-22
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 31 Ohm - #SK0106-31
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 43 Ohm - #SK0106-43
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 50 Ohm - #SK0106-50
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 60 Ohm - #SK0106-60
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 76 Ohm - #SK0106-76
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 90 Ohm - #SK0106-90
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 100 Ohm - #SK0106-100
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 110 Ohm - #SK0106-110
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 120 Ohm - #SK0106-120
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 148 Ohm - #SK0106-148
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
S&K Controller chip (for S&K ELECTRONIC CONTROLLER #SK0101) 170 Ohm - #SK0106-170
Also, available for order (Ohm) (contact us for details):
11; 22; 31; 43; 52; 60; 76; 90; 100; 110; 120; 148; 170
-
KOBIS RACING Controller model A3
KOBIS RACING Controller model A3
Anti-brake model controller.
Suitable for all cars. Anti-Brake feature improves Open12 and Production 24 race performanceNew features in this version
- Third generation Anti-Brake system
- Improved power management system, voltage drop reduced to 0.04 V
- New brake power control
-
KOBIS RACING Controller model P1
KOBIS RACING Controller model P1
Professional model controller.
Suitable for all cars. Wire choke feature improves control of cars power and smoothness.
New features in this version
- Wire choke. Choke resistance is adjusted by 16 position rotary switch.
- Wire Choke controls cars power and smoothness.
- Choke has a wide range of adjustment from 0 to 42 foot.
- New power management system.
- New Soft Brake adjustment