logo
0
Shopping cart is empty
ГлавнаяFluidsGlue for Tires & MagnetsUHU → UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener

UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener

Quick Overview

  • solvent free two-part epoxy resin adhesive for heavy-duty requirements (300kg/cm2)
  • mix proportion: 1 part binder to 1 part hardener (by volume).
  • working time (open time) approx. 90 minutes
  • setting time and final strength depend on temperature.
  • final strength up to 30N/mm2
  • time resistant, impact resistant and water resistant

Details

UHU plus endfest 300 is a solvent free, universal 2-component epoxy resin adhesive for heavy-duty requirements. Approximately working time is 90 minutes. The setting time and final strength (up to 3000N/cm2) dependent on temperature. At room temperature uhu plus endfest 300 hardens after 12 hours. UHU plus endfest 300 epoxy is resistant to age, humidity and also shock-resistant.

Hardening Time of UHU PLUS ENDFEST 300

TemperatureHardening TimeBond strength* (10 N/cm2 = 1kg/cm2)
20°C12 hrs.1200 N/cm2
40°C3 hrs.1800 N/cm2
70°C45 mins.2000 N/cm2
100°C10 mins.2500 N/cm2
180°C5 mins.3000 N/cm2

*at combined tension and shear strain for aluminium.

After the two components of UHU plus endfest 300 have been mixed, the adhesive hardens with almost no loss of volume to form a duroplastic synthetic resin. The parts to be assembled usually need to be fixed under pressure. Extreme pressure It is not necessary. Hardening takes place by evaporation. The working consistency is designed to achieve a good bond at room temperature with a minimal amount of movement.

For more information you can visit the following link: http://www.uhu-profishop.com/uhu-plus-300-epoxy-resin-adhesive-tube-binder-tube-hardener-33g.html 

Additional Information

EAN4026700456400
Suitable materialsGlues metal, glass, porcelain, ceramic, wood, marble, stone, concrete, thermosets, glass fiber, reinforced plastics, hard-pvc, rubber, Styrofoam® and more.
Unsuitable materialsNot suitable for large glass surfaces, PE or PP.
LoadingHigh, Low, Medium
ResistanceAcid, Gasolin, Lye, Oil, Water
Temperature range- 40°C up to + 100°C (higher temperatures possible - depending on material and construction)
ProcessingSurfaces must be dry and free of dust and grease. Roughen smooth surfaces. Mix 1 part binder with 1 part hardener (equal lengths of strands). Apply adhesive to one side, or to both sides for rough materials. Place the parts together in exactly the right position without applying pressure.
PackingTube Binder (18g/15ml) und Tube Härter (15g/15ml) sowie eine Mischwanne mit Spatel
Chemical basisEpoxidharz
Viscosityhighly viscous, medium viscous
Working lifeapprox. 90 minutes
Bonding processWet application
Customs tariff number (HS-Code)

35061000

9.00 $
UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener UHU PLUS 300 EPOXY RESIN ADHESIVE, Tube Binder, Tube Hardener

We also recommend

Comments

There are no comments