About us

Thank you for visit to our store!

We are happy to answer on any questions!

Regards, slotracingshop.com team

Featured products

• 

  Innovative controller EVO-1 from DenVel Electronics

  898.88 $

• 

  RED FOX EUROSPORT 1/24 AUDI 2019-2021 ISRA LEGAL BODY, lexan, thickness 0.125 mm (.005") - #RFAUDIISRA19

  6.18 $

• 

  S&K 0- 17V, 12A Power Supply. 110v or 220v. Weight 340 gr./ 0.75 lb. Dimensions: 110 x 90 x 48 mm

  365.17 $

• 

  RED FOX Production 1/24 Audi RS5 DTM body (ISRA 2019), lexan, thickness 0.125 mm (0.005"), w/paint masks - #RFAUDIPROD19-05

  6.18 $

• 

  RED FOX Production 1/24 Audi RS5 DTM body (ISRA 2019), lexan, thickness 0.175 mm (0.007") - #RFAUDIPROD19-07

  6.18 $

• 

  Cahoza black covered pinion 72 pitch 5 teeth, 0° angle 1.5 mm bore - #17

  34.00 $

• 

  RedFox Cutdown GRAPHITE Guide Flag, unthreaded, Low Profile. This in effect lengthens the chassis. - #RFBAGHG

  5.50 $

• 

  MS Guide Threader 2.0 Metric Thread

  73.03 $

• 

  RED FOX Production 1/24 ISRA 2018 body REDFOX LADA .007" , Lexan .007" (0.175 mm) - #RFLADAISRA07

  2.81 $

• 

  SCB braids HIGH SPEED (sizes: 5,20 x 0,7 mm), 5 pair - #HSCU01205

  8.99 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 38 teeth (Ø14.52 mm) on 3/32" Proslot axle - ZBH#230

  11.24 $

• 

  Dubick 2019 ES 1/32 Eurosport Chassis Assembled without ballbearings - #322019

  146.07 $

• 

  BSV TIRE TRUER

  235.00 $

• 

  VALIKO Armature Х-12 48º, 0.515" diam. (ISRA 2019 in UK oficial armature)

  78.65 $

• 

  VALIKO Armature Х-12 42º, 0.515" diam. (ISRA 2018 oficial armature)

  78.65 $

• 

  VALIKO Х-12 CUSTOM armature, 0.510 - 0.518 diam. Any degree and long.

  78.65 $

• 

  ZHB GLUING SERVICE GEARS ON AXIE & MACHINING HUBS - ZHB#109

  5.00 $

• 

  CAHOZA ES24 glyed gear 72 PITCH 40 teeth (Ø14.85 mm) on 3/32" Proslot axle - ZBH#231

  11.24 $

• 

  Dubick 2018 F1-32 Chassis Assembled without ballbearings - #F12018

  146.07 $

• 

  PIRANIA DONUTS Primo 2018 "42", inside Ø 9.5 mm, outside Ø21.7 mm, about 42 mm width, sintered from two sheets of rubber (one donut enough for 2 pc wheel 1/32 and 1/24 cars), pair - #PIRGOLD42

  7.00 $

New arrivals

• 

  JK Lead wire 18Ga (section 0,82 mm²), transparent, 1 m (3 ft) - #U52-3

  3.20 $

• 

  JK Hawk 11 extreme performance drag motor - #JKM11

  15.90 $

• 

  JK Donut wizard mounting tool - #JK8075

  17.95 $

• 

  JK Silver plated copper guide clips, pair - #U60

  1.29 $

• 

  VITULA PINION 64 PITCH, 6T , 0° ANGLE, EDM, 2 mm bore - #P6620

  28.09 $

• 

  VITULA 3/32" (2.36 mm), .039" (1 mm) thick, brass axle spacer, 20 pcs. - #S0100-20

  8.99 $

• 

  VITULA Crown gear, hypoid 72 pitch 33 teeth , 2 mm axle, Ø13.2 mm, red - #CG733

  12.36 $

• 

  CAHOZA GOLD PLATED HORIZONTAL HARDWARE FOR F1/32 - #CAH108

  21.00 $

• 

  SLICK 7 Precision ballbearing 2 x 5 mm, shielded, 1 pc. - #SL7549

  6.95 $

• 

  Innovative controller EVO-1 from DenVel Electronics

  898.88 $

• 

  VITULA 3/32" x 3/16" (2.36 mm x 4.76 mm) bushings in production chassis, pair - #B1300

  5.62 $

• 

  VITULA Ø3/32" (2.36 mm) rear axle (length 58 mm) - #A1000

  5.06 $

• 

  PROSLOT Motor brushes G7, pair - #PS-G7

  3.60 $

• 

  ZHB Czech Cleaning paste for chassis, removes rust and dirt

  4.49 $

• 

  OLEG Body Eurosport 1/24 Audi R15 LMP DTI, thin .007” (0.175 mm) - #OLG0118

  4.49 $

• 

  DUBICK GOLD PLATED GUIDE CLIPS WITH CRIMPING - #DB703

  3.90 $

• 

  OLEG Body Production 1/24 Subaru BRZ, Lexan .007" (0.175 mm), with paint mask

  5.62 $

• 

  S&K GEAR 64 PITCH, 35T, 16° angle, 3/32" axle, Ø14.6 mm

  4.44 $

• 

  DUBICK Rear bridge for the chassis "SUPER-TEAPOT" 1/24 (w/hole to the motor)

  5.00 $

• 

  ZHB KIT FOR BUILD CHASSIS "SUPER-TEAPOT" 1/24 w/hole to the motor, thick. 1,5 mm w/foil, full cut details kit, ready for assembly by the rivets

  4.64 $