Axle ballbearing 3 х 7 х 3 mm,  shielded, 7 balls - 1 Pc. - #3x7x3

Популярное в Америке и Англии шасси. Не проехало ни одной гонки, только тестировалось. Собрано Одненко Костей.

CHICAGOLAND RACEWAY 3/32" (2.36 mm) x .400" (10.16 mm) Brass pre-cut axle spacer / hub-adapter (3/32" -> 1/8"), 1 pc.

It is convenient when setting the gear gap to F1 / 32, if there is a dremel, you can make a spacer of the required width.

It can also be used as an hub-adapter 3/32 "-> 1/8"

ARP Phenolic axle spacer bearing shields 3/32" (2,36 mm) x .250 (6,35 mm) OD, 1 pc. - #arp-phen

Phenolic axle spacer shields to protect bearings on retro front tires. 3/32 id x .250 od - 10 pieces per bag

ARP Phenolic axle spacer bearing shields 3/32" (2,36 mm) x .250 (6,35 mm) OD, 10 pcs. - #arp-phen

Phenolic axle spacer shields to protect bearings on retro front tires. 3/32 id x .250 od - 10 pieces per bag

HORKY PINION 80 pitch 6 teeth, EDM, shaft 1.5 mm 

Electrical discharge machining (EDM) 

CAHOZA Black covered pinion 80 pitch 6 teeth, 0° angle 1.2 mm bore, EDM - #13A

EDM pinions 80 pitch 6T - 1,2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 80 pitch gears

72 pitch stainless steel 8 tooth pinion gears heat treated to 36-38 hardness

The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

72 pitch stainless steel 9 tooth pinion gears heat treated to 36-38 hardness

The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

ARP Pinion gear 48 pitch, 10T, 2 mm bore, steel - #arp4810s

48 pitch Straight stainless steel 10 tooth pinion gears

DUBICK PINION 48 PITCH, 11T, 0° angle 2 mm bore, BRASS

This is press-on style pinion gear

SONIC PINION GEAR 48 PITCH, 11T , 2 mm bore, steel - #SON3048-11

11 tooth 48 pitch hardened pinion. They cut all their pinions individually on a dedicated gear machine for maximum tooth precision

ARP Pinion gear 48 pitch, 11T, 2 mm bore, steel - #arp4811s

48 pitch Straight stainless steel 11 tooth pinion gears

BSV Pinion gear 48 pitch, 12T, 0° angle, 2 mm bore, PLASTIC- #BSVP4812

JK Tube - front tire w/cap, small  - #U56

• Height: 1,57" (40 mm);
• Dia.: 0.9" (23 mm);
• Dia. tires: < 0.80"  (20,3 mm.)

JK Tube - thin w/cap - #U59

• • Height: 2.188" (55,58 mm);
  • Dia.: .915" (23,25 mm);
  • Dia. tires: < 0.8"  (20,32 mm.)

JK Tube - regular w/cap - #U58

• • Height: 2.20" (56,05 mm);
  • Dia.: 1.07" (27,26 mm);
  • Dia. tires: < 0.96"  (24,4 mm.)

WRIGHTWAY .050" ALLEN WRENCH W/GUIDE TOOL 9,5 mm, anodized

DUBICK STAND FOR STORAGE WHEELS BOTTLES Ø27 mm (PSE, Alpha Large), 103 x 137 mm, acrylic - #DB203-27

PARAMETERS

• Dia. of wheels bottles, mm: 27 (PSE, Alpha Large)
• Quantity of holes for bottles, pcs: 12
• Size, mm: 103x137
• Material: acrylic

ZHB COMMUTATOR GROOVING ON HIGH-PRECISION LATHE "HUDY" - #105

ZHB PREPARING WHEELS SET (GLUING & MACHINING) - #106

Painting bodies by water-based paints PARMA, under special order.

MACK 1/32 Chassis GENESIS, for brushless motor, without ballbearings