-
CAHOZA EUROSPORT 24 SETUP 20 SEGMENT FLAT, .450T x .300L - can ID .590 - #102-A
PARAMETERS
- Magnets quantity: 20 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP 24 SEGMENT FLAT, .450T x .300L - can ID .590 - #103
PARAMETERS
- Magnets quantity: 24 flat
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 24 SEGMENT, .450T x .300L - can ID .590 - #103-A
PARAMETERS
- 24 segmented magnets – bevelled 15°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CAHOZA EUROSPORT 24 SETUP V 28 SEGMENT, .450T x .300L - can ID .590 - #103-B
PARAMETERS
- 28 segmented magnets – bevelled 7°
- Outside dia.: .590" (15,00 mm)
- Magnets height: .448" (11,4 mm)
- Magnets length: .315" (8 mm)
- Endbells dia.: .570" (14,5 mm)
- Total length (including endbells, without post for ball bearing): .610" (15,5 mm)
- Setup designed for .485" armatures, vertical hardware #170, 5 coil anodised spring posts, long tower for PK arms (with commudator cap)
-
CASTRICONE 2021 ES Chassis Assembled without ballbearings
It is delivered under the order
-
HORKY BIG HUB 80 PITCH 44T, 0° angle, 2 mm axle, Ø14.5 mm glued on 2 mm axle KOFORD - ZHB#206
The hub is cut to a width 3.5 mm & machined to a diameter 3 mm
This one intended for Eurosport 1/32
You can order gluing any gear on any axle. Price for gluing & machining - $5 (ZHB#109)
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/30, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 28º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/30, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/30
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 28
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 45/29, DIA. 0.459", STACK 0.235", ADVANCE ANGLE 18º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 45/29, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 45/29
- Dia.: 0.459"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 18
-
KOFORD ARMATURE ULTRASHORT FOR F1/32, WINDINGS 49/28, DIA. 0.465", STACK 0.235", ADVANCE ANGLE 20º, BALANCED, shaft lapping to 1.5 mm - M255EH (CUSTOM)
ARMATURE ULTRASHORT FOR F1/32, 49/28, BALANCED, H blank ultrashort custom Euro arm with angled comm tabs for F1
PARAMETERS:
- Wingings: 49/28
- Dia.: 0.465"
- Stack: 0.235"
- Long (by ballbearings): 0.664"
- Advance angle: 20
-
REDFOX FORMULA 1/24 BODY, Lexan, thin .007" (0.175mm) - RFSC29C
Formula 1/24 Body
- Made from: Polycarbonate (Lexan)
- For: Formula 1/24
- Thickness: .007" (0.175mm)
-
SLICK7 GLIDEX II OILITES AND BALLBEARINGS OIL -#S7-426
SLICK7 OILITES AND BALLBEARINGS OIL
GLIDEX II Synthetic lubricant for bushings and ball bearings. A must for SL7 bushings.
-
VALIKO ARMATURE S-arm (slot ceramic, blue), WINDINGS 45/29, DIA. 0.460", STACK 0.240", ADVANCE ANGLE 28º, BALANCED, shaft 1.5 mm
PARAMETERS:
- Type: C-arm
- Wingings: 45/29
- Dia.: 0.460"
- Stack: 0.240"
- Long (by ballbearings): 0.660"
- Advance angle: 28
- Arm.shaft: 1,5mm
-
ZHB Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
Axle ballbearing 3 х 7 х 3 mm, shielded, 7 balls - 1 Pc. - #3x7x3
-
ZHB AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
AXLE Ballbearing 3 х 9 х 3 mm, flanged shielded, 7 balls, pair - #3x9x3F
-
ZHB Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
Ballbearing 3 х 7 х 3 mm, flanged shielded, 7 balls - 1 Pc. - #3х7х3F
-
ZHB F1 10M SETUP, .256 long - .376 tall - can ID .570
SPECIAL ORDER!
F1/32 SETUP 10 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Dia. for gluing magnets: 14.7 mm
- Outside dia.: .570"
- Magnets height: .376"
- Magnets length: .256"
- For armature: KOFORD ULTRA SHORT (M255EH)
- Ballbearings: GRW (1,5 mm width)
This is no actual photo! Actual photos will be added later!
-
ZHB F1 12M SETUP, .256 long - .376 tall - can ID .570
SPECIAL ORDER!
F1/32 SETUP 12 MAGNETS
PARAMETERS
- Magnets quantity: 10
- Dia. for gluing magnets: 14.7 mm
- Outside dia.: .570"
- Magnets height: .376"
- Magnets length: .256"
- For armature: KOFORD ULTRA SHORT (M255EH)
- Ballbearings: GRW (1,5 mm width)
This is no actual photo! Actual photos will be added later!
-
ZHB F1 TOOL SETUP, .256 long - .376 tall - can ID .570
F1/32 SETUP TOOL
PARAMETERS
- Magnets quantity: 2
- Dia. for gluing magnets: 14.7 mm
- Outside dia.: .570"
- Magnets height: .376"
- Magnets length: .256"
- For armature: KOFORD ULTRA SHORT (M255EH)
- Ballbearings: GRW (1,5 mm width)
-
ZHB PAINT MASK FOR BODY
ZHB PAINT MASK FOR BODY
-
"Wide one", outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
KLINGON Donuts, inside Ø mm, outside about Ø 23.5 mm (.925"), about 32.5 mm (1.280") width, pair
-
3M DOUBLE-SIDED ADHESIVE TAPE, thickness 0.2 mm, width 12 mm, roll of 50 m - 9088
3M DOUBLE-SIDED ADHESIVE TAPE, thickness 0.2 mm, width 12 mm, roll of 50 m - 9088
-
3M Tire glue, tube 147 ml.
3M Tire glue, tube 147 ml.
The best tire glue! Used by the world wide professional, including wing-classes, where rims are often perforated and, along with large loads, have a smaller adhesive area.
-
ALPHA CUP POINT SCREWS Ø4/40" (Through-hole) IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #885
ALPHA CUP POINT SCREWS Ø4/40" IN RIMS & GEARS, LENGHT 1/8" (3,15 mm), 1pc. - #886
- About us
- Delivery
- Payment
- Contacts
- Links
- RC (radio-controlled mode)
- Sign in
- Create an account
- My cart (0)
- DUBICK Engineering Chassis
- DUBICK Engineering Controllers
- ZHB (DUBICK Engineering) Setups
- KOLHOZA Tools, Equipments & Accessories
- ISRA F1/32 Legal 2023-2026 custom painted bodies by KOLHOZA
- Controllers & Controller Parts
-
Motors, Setups & Motor Parts
- Eurosport assembly motors
- Setups For Eurosport Motors
- Eurosport Classes Armatures
- Parts for Assembly Eurosports Classes Motors
- Falcon, Hawk & Johnson Motors
- Group-16D Motors & Parts
- Group-12 Motors & Parts
- Drag Motor Parts
- Motor (2 mm) Spacers
- Motor Springs
- Motor Brushes
- Ballbearings for Motors
- Shunt wires & Spring Insulations
- Chassis & parts
- Lead Wire (all)
- Guides, Lead Wire, Braid, Clips, Nuts & Spacers for Guides
- Axles, Bearings, Oilites & Axle spacers
- Screws
- Gears
- Wheels, Tire Donuts, Rims
-
Bodies, Stickers, Pins, Body Tape, Bulletproofing & Accesories
- Body Clips & Pins
- Materials For Body Reinforcement
- Lane Stickers
- Body Stickers
- Clear Interiors & Drivers
- ISRA Legal Clear Bodies
- Production 1/32 Clear Bodies
- Production 1/24 (G-12) Clear Bodies
- Formula 1/32 Clear Bodies
- Formula 1/24 Clear Bodies
- Eurosport 1/32 Clear Bodies
- Eurosport 1/24 Clear Bodies
- Open-12 1/24 Clear Bodies
- "Teapot" 1/24 Clear Bodies
- Retro 1/24 Clear Bodies
- 1/24 Clear Bodies
- GM-class (Truck) Clear Bodies
- G-7 Air Control Kits & Bodies
- Painted bodies & interiors
- Polycarbonate (Lexan) Sheet
- Fluids
-
Paint
- Painting mask (decals) for painting Kolhoza F1 Mercedes W07 Hybrid body
- TAMIYA spray paints for polycarbonate (lexan) & masking tape
- PARMA bottle paints for polycarbonate (lexan)
- Ralph Thorne Racing bottle paints for polycarbonate (Lexan)
- TayloRacing Paint Masks
- Parma Paint Masks
- TayloRacing Paint Masks for RC-models
- Tools & Equipments
- Accessories & Storage
- RTR Cars & Kits
- "Teapot" Models Kits & Parts
- Service
- Second hand
- RC-models
-
All brands
- 3M
- ALPHA
- Argentina Slot
- ARP (American Race Products)
- ASSOCIATED
- ATTAN
- B.S.V.
- B52
- BANDITO RACING
- BOLID
- BPA
- Brain Saunders
- BSR
- CAHOZA
- CAMEN Racing Products
- CHAMPION RACING
- Chicagoland Raceway
- CW bearings
- Delta Plastic
- DenVel electronics
- DIFALCO
- DUBICK Engineering
- Eagle Products
- EARacing
- FACTORY RACIN BODIES
- FRONT LINE (FL) SLOT
- FUZION (WEIGHING-MACHINE JEWELRY)
- General Electric
- GENERIC USA
- GO FAST
- GOFER RACING
- GOPHERT
- GRW
- H&R
- HAKKO
- Henkel
- HORKY
- HUDY
- INORS
- INTEGY
- JConcepts
- JK Products
- JS Car
- K&S Engineering
- KA PRODUCTS
- KELLY (PROSLOT)
- KLINGON
- KOBIS RACING
- KOFORD
- KOLHOZA
- KrickKrack
- KV
- LOCTITE (ГЕРМАНИЯ)
- Lucky Bob's Racing Products
- Magnehone
- MAIN {Solutions}
- MAKS
- MASHKOZA
- MG
- MID AMERICA
- MOSSETI
- MS-Slotparts
- MTT Products
- MURA
- NeAn
- Neotron
- Novak
- OLEG
- PARMA
- PAW BRAID
- PJ RACEWAY
- PK
- PRIME Racing
- PRO-TRACK Corporation
- PROSLOT
- Qbick
- RACERS EDGE
- Ralph Thorne Racing
- RED FOX
- REH
- RICHARD MACK
- S&K
- SCB
- Skinner
- SLICK 7
- Slot Fox
- Slot Racing Ukraine
- Slotlab
- Slotracingshop.com
- SONIC
- SPEED SHOP
- SPYTECH
- SRP (Slacker Racing Products)
- SRT SLOT
- Sveslot
- T/R
- TAMIYA
- TayloRacing
- TOP SECRET
- TQ WIRE
- Trinity
- TURNIGY
- TWP Products
- UHU
- VALIKO
- VITULA
- VOKI
- Weller
- WIHA
- Worm Jim Slot
- WRIGHTWAY
- YRE
- ZHB
- ЦМИТ "ИнТехно"