MID AMERICA 3/32" (2.36 mm), .197" (5 mm) thick, phenolic axle spacers, 10 pcs. - #PAR619

Replacement tip for soldering station #936, 7/32" (5.55 mm)

Replacement Hakko 900L Tip PN: 900L-T-S1 TIP,7/32in. D,900L/908/914

Replacement tip 6.5 mm, for FX-601 soldering iron  

Chisel tip 6.5 x 18mm / Hakko T19 Series soldering iron tips, used with the Hakko FX601-01 temperature adjustable soldering iron.

SET OF STAND FOR SOLDERING IRON WITH VISCOSE SPONGE. 

Very need thing to soldering iron, preventing burning out by them surrounding objects. Also viscose spoge could clean soldering iron tip from all debris

JK Armature for HAWK #M3 motor - #M3A 

Basic HAWK motor armature. It can be used in Proslot EURO MK motors

Old catalog #JK30302

TURNIGY Lead wire 16Ga (section 1,31 mm²), red, 1 m (3 ft.), insulation diameter .12" (3,04 mm)

3 feet  (1 m) orange - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.

3 feet  (1 m) black - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.

3 feet  (1 m) blue - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.

Very soft lead wire, perhaps, it can use in some wing classes or in drag-racing.

Good choise for power supply unit or controllers!

3 feet  (1 m) yellow - TQ 16 Gauge wire is constructed with 665 strands of bare copper and thin wall silicone insulation. This wire is only 2.4mm OD, extremely flexible, and absolutely will not tweak 12th and 10th scale pan cars, even with brushless systems that require 3 wires to the motor.

CAHOZA 5 coil stainless steel springs, 1 pair - #161

Cahoza springs for Scale motors and G27 motors, made from stainless steel, resists up to 800F

CAHOZA Aluminium nickel plated brush hoods, 1 bag (6 pairs) - #266

hardware (brush hoods), made from hard aluminium plate with thickness of 0.4mm (.0157"), nickel plated, hand work, most precise, no more grinding or drilling

MOSSETTI Motor screws, 4 pcs, w/allen key - #MR1053

4 motor screws and allen key for the Patriot 1004 chassis.

 0-80 aluminum endbell and can screws, anodized to resist corrosion, 1/3 the weight of steel. Use standard wheel wrench to tighten. Reduces stripping of endbell threads compared to steel screws. Easy open box of 24.

SETUP FOR ASSEMBLY EUROSPORT MOTORS, NICKEL-PLATED

PARAMETERS:

• EXTERNAL DIA. .620" (15.75 MM)
• HEIGHT .430" (10.9 MM)

KOFORD Air control kit .005" sidedams and .007" spoiler, 1 pc. - #M203T7-1

Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars

KOFORD Air control kit .005" sidedams and .007" spoiler, 1 cd. (6 pc.) - #M203T7

Lastest Pro design air kit with true .005" sidedams and .007" spoiler. For shorter cars

Clear body G7, G27 Stratos

• Made from: Polycarbonate (Lexan)
• For: G7
• Thickness: .005" (0.125 mm)
  • Length: 5.807" (147.5 mm)
  • Width: 3.11" (79 mm)
• Clear body.

72 pitch stainless steel 7 tooth pinion gears heat treated to 36-38 hardness.

The alternative to the HORKY pinions. One hundred percent ratio of price / quality. Very soft work of reducer.

HORKY PINION 72 PITCH, 7T, 0° angle, EDM, 2 mm bore 

CAHOZA Black covered pinion 72 pitch 7 teeth, 0° angle 2 mm bore - #15

EDM pinions 72 pitch 7T - 2mm hole, very accurate, plated with special black cover especially developed for Cahoza, this cover enhances lubricity 8 times and repels solder so teeth cannot be soldered through, after application the pinion hole is firmly cut to exact size and solder then sticks perfectly in, made from stainless steel 45 HRc, suitable for all types of gears, ideal for Cahoza 72 pitch gears

CHAMPION Astro chassis RTR kit - no body - #C140

1/24 scale 

GUIDE CLIPS LONG - guide clips for all types of guides, manufactured from tough brass plate, thickness 0,3mm (.0118"), lead wires are soldered onto the top side of the clip