KOLHOZA Stand for installation body on Production 1/32 JK "Cheetan 11" chassis - #KZA034

Tri-Star G12 arm .518 diameter 38° timing. Multiple Nat's winner. Features super hard, wear resistant, better then drill blank shaft and 800° epoxy for the ultimate in reliability

KOLHOZA Body installation stand for JK Cheetah 21 chassis

MID AMERICA Double plated solder iron tip - #MID120

replacement tip for the MID118 iron

WWML - 18 gauge, thinner insulation, super light silicone insulation. 402 strands seems to center the guide after wrecks better then what's available now. 8 foot lengths.

MID AMERICA 3/32" (2.36 mm), .050" (1.27 mm) thick, brass axle spacers, 8 pcs. - #MID502

3/32 brass axle spacers .050 thick- There are 8 pieces per bag

MID AMERICA 3/32" (2.36 mm), .050" (1.27 mm) thick, aluminum axle spacers, 8 pcs. - #MID500

050 long machined aluminum spacer for 3/32 axles. 8 per bag.

Parameters:

• Axle: 3/32" (2,36 mm);
• Thickness: 0.060" (1,54 mm);
• Made from: plastic;
• Quantity: 1 pc.

Sonic machined aluminum 3/32" axle spacers

Parameters:

• Axle: 3/32" (2,36 mm);
• Thickness: 0.060" (1,54 mm);
• Made from: aluminum;
• Quantity: 1 pc

All Sonic spacers for both size axles are made of alumininum and now Black anodized.

KOFORD 3/32" (2.36 mm) .060" (1,52 mm) thick machined aluminum axle spacer, 6 psc. - #M733

MID AMERICA 3/32" (2.36 mm), .100" (2.54 mm) thick, brass axle spacers, 8 pcs. - #MID503

3/32 brass axle spacers .100 thick- There are 8 pieces per bag 

MID AMERICA 3/32" (2.36 mm), .100" (2.54 mm) thick, aluminum axle spacers, 8 pcs. - #MID501

100 long machined aluminum spacer for 3/32 axles. 8 per bag.

.100 long machined aluminum spacer for 3/32 axles. 6 per bag.

SLICK7 3/32" (2.36 mm) .100" (2.54) long, aluminum spacers, 4 pcs.

JK GEAR 80 PITCH, 45T, 0° angle, 3/32" axle, Ø14,9 mm, w/screw - #G845

Old catalog #JK4345

ASSOCIATED FT Body Scissors - #1737

Curved high-carbon steel blades that allow smooth, accurate cuts around complex wheel arches and tight curves.

Ideal for preparing and finishing lexan bodies.

DIAMOND WHEEL SET, w/holder, 5 pcs. - #WWDCD 

HAKKO REPLACEMENT TIP FOR SOLDERING IRON WELLER 40W , width 3,5 mm- #HAKT18-D32/P

ATTAN Clear Body Production 1/24 Tesla Model S P100DL Electric GT LEGAL FOR ISRA 2020

• Made from: Polycarbonate (Lexan)
• For: Production 1/24
• Thickness: .007" (0.175 mm)
• Clear body, with paint mask

Excellent glue for tires, better than the "moment" and "88".

NEW CAHOZA TORNADO 2 MAGNETS
these magnets are produced from special Japanese material, they are manufactured using anisotropic technology and after zapping the magnetic lines are radially oriented, height 14,15mm (.555"), length 11,5mm (.453"), thickness 3,85mm (.152"), weight 6,58 grammes, Tornado 2 magnets are marked with white dot, magnets are legal for USRA and ISRA

NEW CAHOZA TORNADO 2 BEVELLED MAGNETS
the same as #275 magnets, but feature 16-degree cut, weight 5,96 grammes, these magnets are legal for USRA and ISRA

KOFORD Lead wire 18Ga (0,82 mm²), super ultra flex silcone, 9 m. (30 ft.) - #М667 

Lightweight ultraflex 413 strand 18 guage lead wire with superthin wall insulation. Reduced insulation wall thickness results a 14% weight savings over competitors lead wire. Worlds and Nat's winner.